home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #1 / NN_1993_1.iso / spool / comp / graphics / gnuplot / 614 < prev    next >
Encoding:
Internet Message Format  |  1993-01-08  |  1.0 KB

  1. Path: sparky!uunet!mcsun!uknet!root44!hrc63!zahid
  2. From: zahid@gec-rl-hrc.co.uk (Dr. Zahid Hussain (G11))
  3. Newsgroups: comp.graphics.gnuplot
  4. Subject: problem with logsacle
  5. Message-ID: <1993Jan8.111031.5671@gec-rl-hrc.co.uk>
  6. Date: 8 Jan 93 11:10:31 GMT
  7. Organization: GEC Hirst Research Centre
  8. Lines: 34
  9.  
  10. Hi,
  11. I am using gnuplot 3.2. I am trying to use logscale without a great deal
  12. of success. I have a file of data such as
  13.  
  14. 0.200428
  15. 0.188166
  16. 0.160165
  17. 0.111804
  18. 0.099043
  19. 0.086991
  20. 0.080069
  21.  
  22. I am trying to plot using
  23.  
  24. set log y
  25. set grid
  26. plot "file" w l
  27.  
  28. The machine then starts computing but does not plot even after 10mins on a
  29. Sparc1. Things must be broken but I can't figure out what. What plotting
  30. 3d data file things work ok put no grid or tick marks are produced on the
  31. z-axis with command
  32.  
  33. set log z
  34. set grid
  35.  
  36. Any help correcting this problem will be much appreciated
  37. Thanks,        **Zahid.
  38.  
  39. -- 
  40. Zahid Hussain                  E-mail: zahid%uk.co.gec-rl-hrc@uk.ac.uknet
  41. GEC-Marconi Research Centre    Tel: (+44) 81 908 9255
  42. East Lane, Wembley
  43. Middlesex HA9 7PP, England, U.K.
  44.