home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!news.acns.nwu.edu!telecom-request
- Date: Mon, 4 Jan 93 16:23:18 CST
- From: varney@ihlpl.att.com (Alan L Varney)
- Newsgroups: comp.dcom.telecom
- Subject: 1A ESS Master Scanner Correction
- Message-ID: <telecom13.9.14@eecs.nwu.edu>
- Organization: AT&T Network Systems, Lisle, IL
- Sender: Telecom@eecs.nwu.edu
- Approved: Telecom@eecs.nwu.edu
- X-Submissions-To: telecom@eecs.nwu.edu
- X-Administrivia-To: telecom-request@eecs.nwu.edu
- X-Telecom-Digest: Volume 13, Issue 9, Message 14 of 15
- Lines: 23
-
- In response to an article from bote@access.digex.com (John Boteler), I
- wrote:
-
- > If you are MOST curious (i.e., willing to spend money), you
- > should know that almost all the hardware (and some software, tools,
- > testing details, etc.) associated with 1/1A ESS(tm) switches is
- > described at a high level in two special issues of the Bell Labs
- > Technical Journal (BSTJ), one on the 1 ESS switch, and a later one that
- > describes the 1A Processor (used in both 1A ESS and 4ESS(tm) switches).
-
- > "No. 1 Electronic Switching System", BSTJ, Vol. 43 No. 5,
- > September 1964, Parts 1 & 2.
- > "The 1A Processor", BSTJ, Vol. 43 No. 5, February 1977.
-
- Terry Kennedy has (rightly) questioned the Volume numbers ... the
- second reference should be:
-
- "The 1A Processor", BSTJ, Vol. 56 No. 2, February 1977.
-
-
- Al Varney -- just MY mistake
-
-