home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.dcom.modems:19028 biz.comp.telebit:1119
- Newsgroups: comp.dcom.modems,biz.comp.telebit
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!usc!elroy.jpl.nasa.gov!earle
- From: earle@elroy.jpl.nasa.gov (Greg Earle - Gainfully Unemployed)
- Subject: Re: WB Fax Upgrade
- Message-ID: <1993Jan6.230628.20246@elroy.jpl.nasa.gov>
- Followup-To: comp.dcom.modems
- Sender: isolar!earle@elroy.JPL.NASA.GOV
- Organization: Gainfully unemployed
- References: <1993Jan3.141940.19230@kegworks.mn.org> <1993Jan6.011755.9953@dms.agames.com> <C0GF1v.Eqt@news.rn.com>
- Date: Wed, 6 Jan 1993 23:06:28 GMT
- Lines: 23
-
- In article <C0GF1v.Eqt@news.rn.com> larry@news.rn.com (Larry Snyder) writes:
- >>For what it's worth GNU has a FAX Modem server and it's FREE ...
- >
- >But if Telebit doesn't provide the register discriptions, it's of little
- >use (If Telebit indeed did not supply a complete set of modem registers)
-
- As I said, no they did not. The Addendum basically describes the changes
- to the AT commands and S registers that apply because of the new V.25bis
- support, and some slight changes to the descriptions of some of the
- registers (like S12 is now called "Delay For Prompt Message" instead of the
- old "Escape Sequence Guard Time". Gee, I wonder why that is? (-: ). In a
- few cases, some enhancements have been added, e.g.. &Rx (RTS and CTS
- Interpretation) has added additional &R5, &R6, &R7 and &R8 settings, and the
- &R0 and &R2 settings have been changed.
-
- There is no mention anywhere of AT commands or S register settings that
- pertain to the facsimile capability.
-
- --
- - Greg Earle | Disclaimer: These are MY
- Itinerant Sun Consultant | opinions ONLY, not JPL's!
- isolar!earle@elroy.JPL.NASA.GOV | They just let me post through
- (818) 353-8695 | their machines ...
-