home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.modems
- Path: sparky!uunet!gatech!usenet.ins.cwru.edu!agate!dog.ee.lbl.gov!news!network.ucsd.edu!qualcom.qualcomm.com!athena!rkimball
- From: rkimball@athena.qualcomm.com (Robert Kimball)
- Subject: Re: ZyXEL voice and flow control
- Message-ID: <rkimball.726346303@athena>
- Sender: news@qualcomm.com
- Nntp-Posting-Host: athena.qualcomm.com
- Organization: Qualcomm, Inc., San Diego, CA
- References: <028de479@p101.f701.n202.z1.fidonet.org>
- Date: Wed, 6 Jan 1993 18:51:43 GMT
- Lines: 42
-
- Zero_One@p101.f701.n202.z1.fidonet.org writes:
-
- > > rkimball@athena.qualcomm.com (Robert Kimball) writes:
-
- > >>I have been playing around with voice mail and my ZyXEL and ran
- >into
- > >>a problem. It does not appear that flow control works in voice
- >mode.
- > >>I have set the modem to hardware flow control with the at&h3
- >command
- > >>and get everything set to send voice data to the modem. My
- >computer
- > >>talks to the modem at 56Kbps and when I send the voice data to the
- > >>modem the audio skips sections of speach but is inteligible. I
- >know
- > >>the file is OK because if I reduce the speed that I send the voice
- >data
- > >>to the modem everything works fine...but this is not the correct
- > >>solution. Does anyone have any ideas?
-
- > > I believe this was stated in the voice-mode commands addendum to
- > > the
- > > original manual. It does say that XON and XOFF should work.
-
- >If you look in the manual on page 15-4 it states that "Software
- >XON/XOFF
- >flow control is used."
-
- >Tyrone Horton
- >(Zero One)
- >Tech Support
- >ZyXEL USA
-
- >--- FMail 0.92
- > * Origin: ZyXEL USA (1:202/701.101)
-
- Unfortunatly I got my modem long before voice was available. My manual
- says nothing about voice mode. Thanks for the response.
-
-
- --
- rkimball@qualcomm.com
-