home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.modems
- Path: sparky!uunet!gatech!usenet.ins.cwru.edu!agate!rsoft!mindlink!a3511
- From: David_Hunter@mindlink.bc.ca (David Hunter)
- Subject: Re: Supra 14.4 Connect Problems (again)
- Organization: MIND LINK! - British Columbia, Canada
- Date: Wed, 6 Jan 1993 17:46:49 GMT
- Message-ID: <19295@mindlink.bc.ca>
- Sender: news@deep.rsoft.bc.ca (Usenet)
- Lines: 23
-
- > Laurence Chiu writes:
- >
- > Just got a Supra v32bis Internal fax modem
- > I get CONNECT 2400 message and then it hangs. Occasionally I need to reset
- > the modem (which means a reboot) to hang up the line.....Seems strange that
- > a 2400 connect should be a problem.
- > Thanks
- > Laurence Chiu
- > lchiu@holonet.net
-
-
- I was having some problems connecting with some local boards at 2400 using my
- ext. SFM v. 32bis. Like you I got a connect message and then a disconnect.
- This seems to be resolved by setting AT\N0 (Sets operating mode to normal).
- However, I think this means you lose data compression and error correction
- for any connections made under this setting.
-
- --
- >-----------------------------------------|-----------------------------<
- | David Hunter | "Don't just do something, |
- | Internet : David_Hunter@mindlink.bc.ca | stand there!" |
- | CIS : 72007,2667 | |
- >-----------------------------------------|-----------------------------<
-