home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #31 / NN_1992_31.iso / spool / comp / sys / mac / hardware / 25071 < prev    next >
Encoding:
Internet Message Format  |  1992-12-30  |  2.2 KB

  1. Path: sparky!uunet!olivea!charnel!rat!koko.csustan.edu!nic.csu.net!eis.CalState.EDU!tnakada
  2. From: tnakada@eis.calstate.edu (Tom Nakada)
  3. Newsgroups: comp.sys.mac.hardware
  4. Subject: Re: Q900 & 950 with 45MB cart.
  5. Message-ID: <C03MD4.7M2@eis.calstate.edu>
  6. Date: 31 Dec 92 00:51:04 GMT
  7. References: <C010v3.327@ulowell.ulowell.edu>
  8. Organization: Calif State Univ/Electronic Information Services
  9. Lines: 42
  10.  
  11. stewart.submil.ulowell.edu (Scott Stewart) writes:
  12. > We have a lab here with two Q900's and three Q950's each machine has a
  13. > microtech 45mb removable cart. drive attached.  Every morning, after leaving
  14. > the machine running all night, there is a message on the screen "This disk is
  15. > unreadable" clicking on the "eject" key makes this message go away.  If I
  16. > unhook one of the drives this message no longer appears.
  17. > I have the most recent extension in the sys. folder and each one of these
  18. > drives was put on different machines IIci's IIcx's and the message never
  19. > appears.  I talked to Microtech and they haven't heard of this happening.
  20. > It only happens on the Quadra and only if the extension is enabled.
  21. > Has anyone else had similar problems or any suggestions?
  22. > Thanks in advance!
  23. > scott stewart
  24. > stewart@submil.ulowell.edu
  25.  
  26. We have two different SyQuest based mechanisms hooked up to a Q900 and
  27. have never had the problem you describe.
  28.  
  29. I know that I did have problems with a MicroNet SyQuest when it was hooked
  30. to a IIcx - but they disappeared when I used FWB HD Toolkit to reformat
  31. the disks and used HDT Extension (the system extention that will mount a
  32. SyQuest cart when inserted).
  33.  
  34. I use the HDT Extension if I know I'm going to be using a lot of carts, so
  35. I won't have to bother with Command + spacebar to mount the disks with
  36. SCSI Probe.
  37.  
  38. The above doesn't seem to help, but I'd say take out the MicroNet INIT and
  39. try using either SCSI Probe or the FKey - Mount 'Em and see if the problem
  40. persists. With SCSI Probe there is an option to flush the driver when a
  41. disk is ejected, so it's the better choice if you have carts formatted
  42. with either different versions of the same formatting software or carts
  43. formatted with different formatting software...
  44.  
  45. Good Luck!
  46.  
  47. Tom
  48. tnakada@eis.calstate.edu
  49.