home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.ibm.pc.hardware:34498 comp.sys.ibm.pc:1051
- Path: sparky!uunet!cs.utexas.edu!swrinde!gatech!concert!duke!news.duke.edu!acpub.duke.edu!rlink
- From: rlink@acpub.duke.edu (Robert E. Link)
- Newsgroups: comp.sys.ibm.pc.hardware,comp.sys.ibm.pc
- Subject: modem help
- Keywords: modem
- Message-ID: <8287@news.duke.edu>
- Date: 31 Dec 92 05:59:33 GMT
- Sender: news@news.duke.edu
- Followup-To: poster
- Lines: 33
- Nntp-Posting-Host: raphael.acpub.duke.edu
-
-
- I need help trying to get a modem to work in this machine. I've tried
- two so far. The first a no name that I'm not sure works, the second a
- Haye 1200B Smartmodem internal that does work - just not for me!
- I get the samme results with both modems.
-
- Computer - Data General Dasher 286, MSDOS 5.0, mono monitor and card
-
- Modem dials phone via Hayes commands (i.e. ATDTphonenumber) and gives
- correct action for things like ATM0 (turn off speaker) but will not
- echo any commands to screen when ATE1 is typed. On the second modem
- I've tried (a Hayes 1200B internal Smartmodem) the cursor will jump in
- response to modem commands but no text.
-
- Modem will connect with remote service but will not type any text to
- screen. On the Hayes modem the cursor will jump (and in print mode will
- send spaces to the printer) but no text when remote service sends login
- message.
-
- Basically - no text to screen is the problem.
- I'm using Procomm. Tried to use Smartcom II but everytime I try to load
- it it reboots the computer.
-
- Let me know if you have any ideas.
- Thanks, Robbie
- email preferred
- rlink@acpub.duke.edu
-
- --
- -------------------------------------------------------------------------------
- -Robbie Link
- -Double Bass is my home.
- -rlink@acpub.duke.edu or rlink@unc.bitnet
-