home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!mcsun!chsun!inter!chip
- From: chip@inter.interzone.ch (Marc Liyanage)
- Newsgroups: comp.sys.mac.hardware
- Subject: Need Info about MONITERM VCX810A Monitor
- Date: Sun, 13 Dec 92 23:15:01 CET
- Organization: Interzone Switzerland
- Message-ID: <01062012.l2t3l1@inter.interzone.ch>
- Reply-To: chip@interzone.ch
- X-Mailer: uAccess - Macintosh Release: 1.5v4
- Lines: 35
-
-
- Hi,
-
- I bought one of these from Mirror Technologies some time ago
- but used it only for a short time. It came with a NuBus board
- that drives it. Unfortunately the board is now broken and
- before I send it in for repair, I want to try it with the
- Quadra internal video. It is, btw, a black&white monitor.
-
- Can someone tell me what signals the monitor wants on its 9-pin
- input connector? When I look inside the unit, four wires lead
- from the connector to the deflection board, two of them black
- (Probably ground?), two others different colors. Maybe
- this is H/V-Sync?
-
- Three other wires go to the board that sits on the neck of the
- tube. One black again, the other two different colors.
-
- Another problem is that the monitor is driven at 1024x768
- pixels, wich the Quadra 700 video can't handle, as far as I
- know. Can I use the 16 or 21 inch mode and adjust the monitor
- for the new timing internally?
-
-
- Thanks...
-
- - Marc
-
-
-
- ____________________________________________________________
- Marc Liyanage Internet: chip@interzone.ch
- Papernet: CH-9552 Bronschhofen, Switzerland
- ICBM-Net: 47 29 17 N / 009 03 41 E / ALT 578
- Voicenet: +41 73 22 1196
-