home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!caen!batcomputer!cornell!rochester!udel!news.udel.edu!ravel.udel.edu!swyatt
- From: swyatt@ravel.udel.edu (Stephen L Wyatt)
- Subject: MFM and IDE HD's
- Message-ID: <BzGs78.6E2@news.udel.edu>
- Sender: usenet@news.udel.edu
- Nntp-Posting-Host: ravel.udel.edu
- Organization: University of Delaware
- Date: Fri, 18 Dec 1992 16:52:20 GMT
- Lines: 20
-
- I have one question.. I have an ISA-bus 386/33, and an MFM controller card. if I get an IDE
- drive, can I get another IDE controller card and just put the thing in another slot..
-
- will that work?
-
-
- also... Is it possible to get a 486DX2/66 (33 - bus speed one) and just replace the CPU with that?
- will my bus/motherboard accept it? I also have a co-processor socket... can I use that instead?
- any opinions out there?
-
- please email, since I don't regularly read this newsgroup..
-
-
- thanks alot.
-
- --
- ----------------------------------------------------------------------------
- swyatt@udel.edu !!! no disclaimer...I blame everything I say on someone else
- ----------------------------------------------------------------------------
-
-