home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!darwin.sura.net!gatech!cc.gatech.edu!news
- From: byron@cc.gatech.edu (Byron A Jeff)
- Subject: Re: Performance comparison: Cyrix 486DLC, Intel RapidCAD, C&T 38600DX
- Message-ID: <1992Dec15.170115.9105@cc.gatech.edu>
- Sender: news@cc.gatech.edu
- Reply-To: byron@cc.gatech.edu (Byron A Jeff)
- Organization: Georgia Institute of Technology
- References: <1gi29lINNm9p@iraul1.ira.uka.de>
- Date: Tue, 15 Dec 1992 17:01:15 GMT
- Lines: 18
-
- > [ Very good benchmarking discussion]
-
- One question: Why was the AMD386DX40 excluded from the test? I think it's
- not fair to exclude the chip especially if a 486 at 40 Mhz
- is benchmarked. It should be tested in it's average configuration
- which is 40 Mhz with 64K of external cache. If you need floating
- point then add a 40 Mhz Cyrix chip. I think that many folks like
- myself would like to compare the performance.
-
- Very excellent comparison otherwise.
-
- Thanks,
-
- BAJ
- ---
- Another random extraction from the mental bit stream of...
- Byron A. Jeff - PhD student operating in parallel!
- Georgia Tech, Atlanta GA 30332 Internet: byron@cc.gatech.edu
-