home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!mcsun!uknet!edcastle!aisb!aisb!awb
- From: awb@ed.ac.uk (Alan W Black)
- Newsgroups: comp.sys.ibm.pc.hardware
- Subject: Seagate jumpers for master/slave combination
- Message-ID: <AWB.92Dec14081830@badger.uk.ac.ed.aisb>
- Date: 14 Dec 92 08:18:30 GMT
- Sender: news@aisb.ed.ac.uk (Network News Administrator)
- Distribution: comp
- Organization: Dept of AI, Edinburgh University, UK
- Lines: 18
-
-
- I currently have a seagate ST1239a (211M) IDE drive on a generic
- pc clone (Reeves) and wish to add an ST3283a (245) IDE drive as
- a slave drive on the same controller. I have the details for
- the ST3283a driver about jumper settings for master/slave combination
- but no details for the original ST1239a driver.
-
- Can anyone tell me what jumpers I need to set to make a seagate ST1239a
- a master drive (with slave attached) ?
-
- many thanks
-
- Alan
-
-
- Alan W Black 2 Buccleuch Place, Edinburgh, UK
- Centre for Cognitive Science tel: (+44) -31 650 4627
- University of Edinburgh email: awb@ed.ac.uk
-