home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!agate!stanford.edu!unix!hplabs!hp-cv!hp-pcd!news1.boi.hp.com!cupnews0.cup.hp.com!hpscit.sc.hp.com!hplextra!hpfcso!hplvec!klb
- From: klb@hplvec.LVLD.HP.COM (Kent Barnes)
- Newsgroups: comp.sys.hp
- Subject: Re: Change console on 750
- Message-ID: <560043@hplvec.LVLD.HP.COM>
- Date: 18 Dec 92 17:57:10 GMT
- References: <7201@taurus.cs.nps.navy.mil>
- Organization: Hewlett-Packard Co., Loveland, CO
- Lines: 9
-
- To change back from rs-232 console to graphics:
-
- - Power up 350
- - Hold escape to abort boot process when prompted to do so
- - Select "a" from the list of actions, this puts you in boot admin
- (From the BOOT_ADMIN> prompt you can type "help" or "?" if you want)
- - Type the following at the BOOT_ADMIN prompt:
- BOOT_ADMIN> path console graphics
- BOOT_ADMIN> reset (this puts you back to power on state)
-