home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.atari.8bit
- Path: sparky!uunet!caen!mtu.edu!news
- From: jjmcwill@next3 (Jeffrey J. McWilliams)
- Subject: Re: 800xl pbi on 1200xl (was Re: New Address...)
- Message-ID: <1992Dec16.210402.674@mtu.edu>
- Sender: news@mtu.edu
- Nntp-Posting-Host: next3.mathlab.mtu.edu
- Reply-To: jjmcwill@mathlab.mtu.edu
- Organization: Michigan Technological University
- References: <tgreen.724535645@pv0a27.vincent.iastate.edu>
- Date: Wed, 16 Dec 1992 21:04:02 GMT
- Lines: 26
-
- In article <tgreen.724535645@pv0a27.vincent.iastate.edu> tgreen@iastate.edu
- (Todd Greenfield) writes:
- > In <1992Dec16.171734.23386@mtu.edu> jjmcwill@next3 (Jeffrey J. McWilliams)
- writes:
- > just FYI: radio shack sells a 72 pin edge connector prototype
- > board which can easily be cut down to 50 pins, so you could have the
- > same connection as the 800xl. this board also works well for
- > connecting to the 130xe version of the pbi - just need to add
- > a connector for cartridges.
- >
- > Todd
- > --
- > Todd Greenfield
- > tgreen@iastate.edu
-
- Oh, yeah, okay, that WOULD work, but isn't that board like
- $30.00??
-
-
- --
- Jeff McWilliams jjmcwill@mathlab.mtu.edu EE Engineer --> Michigan Tech.
- On Linden, when the sun was low,
- All bloodless lay the untrodden snow,
- And dark as winter was the flow
- Of Iser, rolling rapidly.
-
-