home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!gatech!cc.gatech.edu!news
- From: kennethm@cc.gatech.edu (Kenneth Moorman)
- Subject: Re: Applied Engineering High Density on WB 2.0
- Message-ID: <1992Dec15.131552.4124@cc.gatech.edu>
- Sender: news@cc.gatech.edu
- Reply-To: kennethm@cc.gatech.edu (Kenneth Moorman)
- Organization: College of Computing
- References: <csieh.724011502@boise> <Boinger.07ni@myamy.hacktic.nl>
- Date: Tue, 15 Dec 1992 13:15:52 GMT
- Lines: 24
-
- In article <Boinger.07ni@myamy.hacktic.nl> boinger@myamy.hacktic.nl (Paul Kolenbrander) writes:
- >In article <csieh.724011502@boise> csieh@boise (Constance Sieh) writes:
- >> I recently have a need to install a Applied Engineering High Density
- >> DISK drive on a 3000 with wb 2.0 . The drivers that come with the
- >> drive do not work on 2.0. Does anyone know of drivers that will
- >> make this drive work on 2.0. I have gotten the drive to work in
- >> high density mode on a CDTV with 1.3.
- >
- >I doubt if there are any. AE left the Amiga scene a while ago in a huff
- >it seemed. And showed no inclination to produce a 2.0 compatible version
- >of the drivers. Your best bet would be to keep it on the CDTV and buy a
- >C= HD drive for your A3000...
- >
-
- Actually, there is a driver for the AEHD drive for WB2.0.
- It was written by a person in Georgia and talked about
- in an issue of Amazing a few months ago. If anyone is interested,
- I can dig the name and address out. I had intended to
- buy the driver (I think it was about $30) but haven't had
- the chance to (probably won't until after Christmas :( ). Hope this
- helps.
-
-
- - Kenneth Moorman (kennethm@cc.gatech.edu)
-