home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.protocols.tcp-ip.ibmpc:7055 comp.sys.ibm.pc.hardware:33665
- Newsgroups: comp.protocols.tcp-ip.ibmpc,comp.sys.ibm.pc.net,comp.sys.ibm.pc.hardware
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!darwin.sura.net!jhunix.hcf.jhu.edu!mozart.med.jhu.edu!scholia.wbme.jhu.edu!scholia!tkolasny
- From: tkolasny@scholia.wbme.jhu.edu (Anthony Kolasny)
- Subject: NCSA Telnet for SVGA Monitor
- Message-ID: <BzGG9L.C1J@scholia.wbme.jhu.edu>
- Keywords: NCSA Telnet
- Sender: news@scholia.wbme.jhu.edu
- Nntp-Posting-Host: scholia.wbme.jhu.edu
- Reply-To: tkolasny@scholia.wbme.jhu.edu
- Organization: Johns Hopkins University, Dept. of Biomedical Engineering
- Date: Fri, 18 Dec 1992 12:34:32 GMT
- Lines: 14
-
- I am experiencing a problem with an IBM 386 clone using NCSA Telnet 2.3.05.
- ftp, whois, finger all work fine but when I use telnet the machine hangs.
- The config.tel works on other machines and the only difference is that this
- machine has a SVGA monitor. The config.tel didn't mention support for that type.
- So, I tried the other types with no success. What must I do to get it to work
- or why doesn't it?
-
- Your assistances is apprecitated.
-
- Thanks,
- Anthony <tkolasny@scholia.wbme.jhu.edu>
-
-
-
-