home *** CD-ROM | disk | FTP | other *** search
- From: yas@hpycla.kobe.hp.com (Yasuyuki Suzuki)
- Date: Thu, 17 Dec 1992 04:26:24 GMT
- Subject: Re: NCSA Telnet w/ Elite16. Very Slow!
- Message-ID: <21400003@hpycla.kobe.hp.com>
- Organization: HP Asia Pacific Product Operation, Kobe, Japan
- Path: sparky!uunet!spool.mu.edu!sdd.hp.com!hpscit.sc.hp.com!hplextra!hpcc05!hpyhde4!hpycla!yas
- Newsgroups: comp.protocols.tcp-ip.ibmpc
- References: <21400002@hpycla.kobe.hp.com>
- Lines: 37
-
- / hpycla:comp.protocols.tcp-ip.ibmpc / yas@hpycla.kobe.hp.com (Yasuyuki Suzuki) / 8:16 pm Dec 16, 1992 /
-
- yas> I tried NCSA TELNET 2.3.0.1 with SMC EtherCard PLUS Elite 16
- yas> (8013EPC). But FTP's put (DOS to UNIX) performance is VERY SLOW.
-
- This is a self-following. :-)
-
- yas> I also tried "free" packet driver "WD8003E.COM" Ver.9.7.0. by
- yas> R.C.Clements. But it didn't work with NCSA TELNET at all.
-
- I'm very sorry, this is wrong. It was just my configuration mistake.
-
- Following is the result of my test.
-
- 1. Packet Driver: None, Telnet direct access.
- config.tel:hardware = wd800
- put 100.0 KB/sec.
- get 147.1 KB/sec.
-
- 2. Packet Driver: wd8003e.com 0x60 0xa 0x300 0xcc00
- config.tel:hardware = packet
- put 235.4 KB/sec.
- get 168.2 KB/sec.
-
- 3. Packet Driver: 8003pkdr.exe /b:300 /r:cc00 /i:10
- config.tel:hardware = packet
- put 0.4 KB/sec. (terrible performance)
- get 168.1 KB/sec.
-
- So, only "8003pkdr.exe" from SMC is wrong. Any way, I found the best
- solution (wd8003.com packet driver). Thank you.
- --
- Asian Pacific Product Operation(APPO), Asian Product Lab.(APL)
- Hewlett-Packard
- Yasuyuki Suzuki yas@kobe.hp.com +81-78-993-2846 (JAPAN)
-
-
-