home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.protocols.appletalk
- Path: sparky!uunet!elroy.jpl.nasa.gov!tsunami.jpl.nasa.gov!eric
- From: eric@tsunami.jpl.nasa.gov (Eric Huang)
- Subject: Re CAP on SPARC2
- Message-ID: <1992Dec17.005840.28826@elroy.jpl.nasa.gov>
- Sender: news@elroy.jpl.nasa.gov (Usenet)
- Nntp-Posting-Host: tsunami.jpl.nasa.gov
- Organization: Image Analysis Systems Group, JPL
- Date: Thu, 17 Dec 1992 00:58:40 GMT
- Lines: 20
-
- >>eric@tsunami.jpl.nasa.gov (Eric Huang) writes:
-
- >>Recently, I've downloaded CAP60,pl100 and installed it on the
- >>SUN SPARC2 running sunos and native Ethertalk Phase 2. I am trying
- >>to print from the SUN to the LaserWriter IIg, and both are connected to the
- >>same Ethernet network. However I am not able to see the laserWriter when i do
- >>atlook. I do see the laserwriter on a Mac's chooser which is also on the
- >>same network. And on the SUN side, when i do atlook, i can see the Mac
- >>and the SUN itself and the LaserWriter created by lwsrv daemon.
-
- >>I have been playing around with the CAP for a while now and getting no
- >>where. Any advice would be greatly appreciated.
-
- >lam@jove.cofc.edu writes:
-
- >Install the patches(101-126). That should fix the problem. Thought those
- >IIg/fs are really flaky in terms of non MAC compatability.
-
- I installed the patches(101-126). I am not yet able to see the IIg on the
- network. Any advice on what i should do next? Thanks in advance.
-