home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.os.os2.misc:39918 comp.os.os2:497
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!malgudi.oar.net!news.ysu.edu!psuvm!cunyvm!mtus5!tran
- Organization: Computing Technology Services, Michigan Technological Univ.
- Date: Friday, 18 Dec 1992 09:04:05 EST
- From: Phat M Tran <TRAN@MTUS5.BITNET>
- Message-ID: <92353.090405TRAN@MTUS5.BITNET>
- Newsgroups: comp.os.os2.misc,comp.os.os2
- Subject: Re: WinOS2 driver for the IAA display card
- References: <1992Dec16.140208.28330@ulci20.unil.ch>
- <92352.091237TRAN@MTUS5.BITNET>
- <1992Dec17.161801.22329@sernews.raleigh.ibm.com>
- Lines: 29
-
- > In <92352.091237TRAN@MTUS5.BITNET> Phat M Tran <TRAN@MTUS5.BITNET> writes:
- > >
- > >I too have the same IBM ImageAdapter/A connected to NEC/MultiSync 5D
- > >running at 1280 by 1024. However, WinOS2 can only use 640 by 480.
- > >Solution to this problem will be greately appreciated.
- > >
- >
- > Phat
- >
- > As of this moment in time there is *no* solution. What several people I know
- > do is run a second display adapter, such as an XGA, in their system. They
- > configure PM/WPS to run on the IAA and full screen sessions on the XGA. They
- > then run WIN-OS2 in the full screen session at XGA resolution.
- >
- > I can say that the problem has been acknowledged by the IA/A developers in
- > Japan. What I cannot say, because I don't know, is what they will do about
- > it.
-
- Since I run OS/2 2.0 with SP on an IBM PS/2 Model 95. This computer
- comes standard with XGA, I added IBM ImageAdapter/A. Thus, both
- are available and connected to the NEC/MultiSync 5D. I can flip a
- switch on the monitor to tell it which input to get. How can I configure
- WIN-OS2 to take advantage of XGA resolution?? (In WIN-OS2's setup
- option, you can only change networking option. There's no
- video option...).
-
- Thanks in advance...
- Phat
-
-