home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!po.CWRU.Edu!dab6
- From: dab6@po.CWRU.Edu (Douglas A. Bell)
- Newsgroups: comp.os.os2.misc
- Subject: Re: New 32 Trident & NEC 4FG Interlaced???
- Date: 15 Dec 1992 20:19:30 GMT
- Organization: Case Western Reserve University, Cleveland, OH (USA)
- Lines: 22
- Message-ID: <1glekiINNn6g@usenet.INS.CWRU.Edu>
- References: <1992Dec15.130008.14664@miavx1.acs.muohio.edu>
- Reply-To: dab6@po.CWRU.Edu (Douglas A. Bell)
- NNTP-Posting-Host: slc12.ins.cwru.edu
-
-
- In a previous article, kbwilson@miavx1.acs.muohio.edu () says:
-
- >Hello Net,
- > I heard about the great new Trident drivers so I rushed to my
- >place of employment and grabbed a New 1 Meg trident card off the shelf
- >With the owners permission of course. Ran home and replaced the old VGA
- >card in my system ( I was waiting for the back ordered ULtra Plus') installed
- >the driver twice (I goofed something the first time) and they worked.
- >My monitor is a NEC 4FG and it looked like it was running in 1024x768x256
- >interlaced. So I resorted to the Card manual AHH a jumper so I removed the
- >jumper per the instructions and Started everything up again and everything
- >stayed the same (an interlaced flicker like look).
- > I tried the 800x600x256 the monitor picked up the change but it still
- >looked interlaced. last I tried the 640x480x256 and this seemed non-interlaced
- >
- >Does anyone have any idea how to make this flicker go away?
-
- It sounds like you made your svgadata file while the jumper was on the
- card. Try making a new svgadata file that will know that the jumper
- was removed. It worked for me with the old trident drivers.
- --
-