NetNews Usenet Archive 1992 #30

home *** CD-ROM | disk | FTP | other *** search

/ NetNews Usenet Archive 1992 #30 / NN_1992_30.iso / spool / comp / lsi / cad / 1211 < prev next >

Wrap

Internet Message Format | 1992-12-14 | 60.5 KB

Xref: sparky comp.lsi.cad:1211 comp.lsi:742 Path: sparky!uunet!cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!ucbvax!ucdavis!tyfon!altarrib From: altarrib@tyfon.eecs.ucdavis.edu (Michael Altarriba) Newsgroups: comp.lsi.cad,comp.lsi Subject: Frequently Asked Questions With Answers (Part 1/2) [LONG] Keywords: FAQ Message-ID: <20132@ucdavis.ucdavis.edu> Date: 15 Dec 92 01:36:06 GMT Sender: usenet@ucdavis.ucdavis.edu Followup-To: comp.lsi.cad Organization: Department of Electrical and Computer Engineering, UC Davis Lines: 1441 Welcome to comp.lsi.cad / comp.lsi: this is the biweekly posting of fre- quently asked questions with answers. Before you post a question such as "Where can I ftp spice from?", please make sure that the answer is not already here. If you spot an error, or if there is any information that you think should be included, please send us a note at clcfaq@eecs.ucdavis.edu. Bret Rothenberg <rothenbe@eecs.ucdavis.edu> Wes Hardaker <hardaker@eecs.ucdavis.edu> Mike Altarriba <altarrib@eecs.ucdavis.edu> Solid State Circuits Research Laboratory Electrical Engineering and Computer Science University of California, Davis Davis, California 95616 ---------------------------------------------------------------------- $Id: comp.lsi.cad.FAQ.ms,v 1.38 92/12/14 17:18:11 altarrib Exp $ Frequently Asked Questions with Answers 1: Mosis Users' Group (MUG) 2: Improved spice listing from magic. 3: Tips and tricks for magic (Version 6.3) 4: What can I use to do good plots from magic/CIF? 5: What tools are used to layout verification? 6: EDIF data exchange format. 7: What layout examples are available? 8: How can I get my lsi design fabbed and how much will it cost? 9: Mosis fabrication services. 10: Archive sites for comp.lsi.cad and comp.lsi 11: Other newsgroups that relate to comp.lsi* ! 12: Simulation programs tips/tricks/bugs ! 13: Getting the latest version of the FAQ 14: Converting from/to GDSII/CIF/Magic 15: CFI (CAD Framework Initiative Inc.) 16: What synthesis systems are there? 17: What free tools are there available, and what can they do? ! 18: What Berkeley Tools are available for anonymous ftp? 19: What Berkeley Tools are available through ILP? ! 20: Berkeley Spice (Current version 3f2) ! 21: Octtools (Current version 5.1) 22: Lager (Current version 4.0) 23: BLIS (Current version 2.0) + 24: COSMOS and BDD 25: ITEM 26: PADS logic/PADS PCB 27: Another PCB Layout Package 28: Magic (Current version 6.3) ! 29: PSpice 30: Esim 31: Isplice3 (Current version 2.0) 32: Watand 33: Caltech VLSI CAD Tools 34: Switcap2 (Current version 1.1) 35: Test Software based on Abramovici text 36: Atlanta and Soprano automatic test generators 37: Olympus Synthesis System 38: OASIS logic synthesis 39: CAzM, a Spice-like table-based analog circuit simulator 40: Galaxy CAD, integrated environment for digital design for Macintosh 41: Gabriel DSP development system 42: WireC graphical/procedural system for schematic information + 43: LateX circuit symbols for schematic generation 44: Tanner Research Tools (Ledit and LVS) (Commercial Product) + : new item ! : changed ? : additional information for this subject would be appreciated. 1: Mosis Users' Group (MUG) (From the MUG newsletter) The MOSIS Users' Group (MUG) Newsletter is distributed only via elec- tronic means to about 1200 individuals throughout the world who have expressed an interest in VLSI systems design and specifically in using MOSIS, the Metal-Oxide Semiconductor Implementation Service, that fabri- cates integrated circuit prototypes inexpensively. We hope that you enjoy receiving this newsletter and find it useful. Comments and suggestions should be directed to the Editor along with any change in address. If you prefer not to receive messages of this type, which will occur no more often than monthly, please contact the Editor. MUG Newsletter Editor Prof. Don Bouldin Electrical & Computer Engineering University of Tennessee Knoxville, TN 37996-2100 Tel: (615)-974-5444 FAX: (615)-974-5492 Email: bouldin@sun1.engr.utk.edu Compmail II: D.Bouldin A variety of design files and CAD tools contributed by the members of the MOSIS Users' Group (MUG) are now available via anonymous ftp from "venera.isi.edu" (128.9.0.32) in directory "pub/mug". The files "readme" and "index" should be retrieved first. These files are provided "as is", but may prove very helpful to those using the MOSIS integrated circuit prototyping service. 2: Improved spice listing from magic. Hierarchical extractions with net names: ext2spice done by Andy Burstein <burstein@zabriskie.berkeley.edu>: This program will do hierarchial extraction using node names. It sup- ports PS, PD, AS, and AD extraction as well. It is available for ftp from ic.berkeley.edu in pub/spice3/ext2spice.tar. Poly and well resistance extraction: There are persistent rumors that people have this working, however, all I have seen is extracted poly resistor with each end shorted together, ie each end has the same node name/number. (This is the most annoying problem that I typically encounter daily. If ANYONE knows a fix for this, please tell us! I wrote a real quick and dirty set of scripts/programs to edit the magic file. It will break the poly contacts and relabel them. This is a real hack, but all other solu- tions require modification of the magic code itself. This procedure only works with an extractor that handles labeled nodes, i.e. ext2spice from above. --WH) There is an upcoming release of Magic 6.45 that is supposed to have a greatly improved netlister. Here is part of the annoucement: The AuE Magic release provides hierarchical SPICE and LSIM netlist extractors not available in previous Magic releases. Previously, a flat SPICE netlist could be obtained using a program called "ext2spice". AuE provides a hierarchical SPICE netlister which provides a robust set of SPICE parameters for every device, including transistor source/drain dif- fusion perimeters and areas. The extractor has also been modified to correctly account for the shared S/D regions on stacked devices. The AuE extractor supports LSIM netlists, an Hspice compatible netlist, and a SpiceIIG compatible netlist. The SpiceIIG format uses node numbers instead of node names. The AuE SPICE extractor also recognizes bipolar junction transistors (BJTs) in several configurations. The previous Magic netlist extractor does not recognize BJT devices in any form. Spice listing from magic with MESFETs. (from Jen-I Pi <pi@isi.edu>) We have a revised version (of sim2spice) that goes with version6. It is available from our anonymous FTP host "venera.isi.edu" (128.9.0.32) under the pub/mosis/magic directory. The file you need is "gaas_extract.tar.Z". Assuming file inv.ext exist, the procedure for using 'sim2spice' is ext2sim inv sim2spice inv.sim Here's the resulting SPICE decks for SPICE3e... SPICE 3 Deck created from inv.sim, tech=edgaas * z2 3 4 2 efet1.2 2.8 C3 3 0 0.485F C4 4 0 1.062F z1 1 4 3 dfet1.2 2.8 * A new capacitance rule has been added to the base Magic extractor to facilitate the extraction of accurate dielectric capacitances. The previ- ous verion of Magic did not handle coupling capacitances correctly and frequently inserted a substrate capacitor in addition to the correctly extracted coupling capacitor. The AuE Magic release also includes an updated and enhanced technology file. Modifications include fixes to several MOSIS DRC rules which were previously improperly checked, modifications to the CIF writer to resolve software bugs, and updated capacitance and resistance values in the extraction sections of the tech file. Special extraction sections for more commonly used processes have also been added. For information on how to order this version of Magic send an E-mail request to magic@AuE.com or send your request in writing to the address given below. We will start filling orders in mid October. 3: Tips and tricks for magic (Version 6.3) Searching for nets: Yes, magic does actually let you search for node names. Use :specialopen netlist. Then click on the box underneath label, you will be prompted for the name of the label you want to search for. Enter the name, and then press enter twice. Click on show, and then find, magic will then highlight the net. Bulk node extraction: Problems with getting the bulk node to extract correctly? Try labeling the well with the node name that it is connected to. Painting Wells: Supposedly :cif in magic will automatically paint in the wells correctly. However this is not always the case. If you are using mosis 2u technol- ogy, and your wells are getting strange notches in them, you might try changing the grow 300 shrink 300 lines in your lambda=1.0(pwell) and lambda=1.0(nwell) cif sections of your tech file to grow 450 shrink 450. (Remember you can use :cif see CWN to see nwell, if :cifostyle is nwell, or :cif see CWP to see pwell if its pwell technology to preview what will be done with the well. You may use :feedback clear to erase what it shows you.) Magic notes available from gatekeeper.dec.com (16.1.0.2): (Located in pub/DEC/magic) Magic note.1 - 9/14/90 - ANNOUNCEMENT: Magic V6 is ready Magic note.2 - 9/19/90 - DOC: Doc changes (fixed in releases after 9/20/90) Magic note.3 - 9/19/90 - GRAPHICS: Mode problem (fixed 9/20/90) Magic note.4 - 9/19/90 - HPUX: rindex macro for HPUX 7.0 and later Magic note.5 - 9/19/90 - GCC: "gcc" with magic, one user's experience Magic note.6 - 9/19/90 - FTP: Public FTP area for Magic notes Magic note.7 - 9/20/90 - RSIM: Compiling rsim, one user's suggestions & hints Magic note.8 - 9/26/90 - GENERAL: Magic tries to open bogus directories Magic note.9 - 9/26/90 - GRAPHICS: Mods to X11Helper Magic note.10 - 10/5/90 - DOS: Magic V4 for DOS and OS/2 Magic note.11 - 10/11/90 - GENERAL: reducing memory usage by 600k Magic note.12 - 12/19/90 - EXT2xxx: fixes bogus resistances Magic note.13 - 12/19/90 - EXTRESIS: fixed bug in resis that caused coredump. Magic note.14 - 12/19/90 - EXTRESIS: new version of scmos.tech for extresis Magic note.15 - 12/19/90 - TECH: documentation for contact line in tech file Magic note.16 - 12/19/90 - EXTRACT: bug fix to transistor attributes Magic note.17 - 5/13/91 - CALMA: Incorrect arrays in calma output Magic note.18 - 5/14/91 - CALMA: Extension to calma input Magic note.19 - 6/28/91 - IRSIM: Some .prm files for IRSIM Magic note.20 - 7/18/91 - EXTRESIS: fixes for Magic's extresis command Magic note.21 - 2/7/92 - FAQ: Frequently asked questions Magic note.22 - 11/6/91 - CALMA: how to write a calma tape Magic note.23 - 11/4/91 - EXT2xxx: fix for incorrect resistor extraction Magic note.24 - 11/8/91 - EXTRESIS: fix 0-ohm resistors Magic note.25 - 11/15/91 - NEXT: porting magic to the NeXT machine Magic note.26 - 11/21/91 - IRSIM: fix for hanging :decay command Magic note.27 - 12/17/91 - RESIS: fix for "Attempt to remove node ..." error Magic note.28 - 1/28/92 - MAGIC: anonymous FTP now available Magic note.29 - 3/27/92 - PLOT: support for Versatec 2700 Magic note.30 - 4/8/92 - PATHS: Have the ":source" command follow a path Magic note.31 - 4/10/92 - MPACK: Mpack now works with Magic 6.3 Magic note.32 - 3/13/92 - AED: Using AED displays with Magic 6.3 Magic note.33 - 3/13/92 - OPENWINDOWS: Compilation for OpenWindows/X11 Magic note.34 - 2/14/92 - OPENWINDOWS: fix mouse problem 4: What can I use to do good plots from magic/CIF? (Thanks to Douglas Yarrington <arri@ee.eng.ohio-state.edu> and Harry Langenbacher <harry@neuronz.Jpl.Nasa.Gov>, for feedback here.) CIF: CIF stands for CalTech Intermediate Form. It's a graphics language which can be used to describe integrated circuit layouts. cif2ps version 2 (Gordon W. Ross, MITRE): A much better version of cif2ps, extending the code of cif2ps (Marc Lesure, Arizona State University) and cifp (Arthur Simoneau, Aerospace Corp). It features command line options for depth and formatting. Can extend one plot over several pages (up to 5 by 5, or 25 pages). By default, uses a mixture of postscript gray fill and cross-hatching. Options include rotating the image, selecting the hierarchy depth to plot, and plotting style customization. Plots are in B/W only. It was posted to comp.sources.misc, and is available by ftp from uunet.uu.net(192.48.96.2) as: comp.sources.misc/volume8/cif2ps.Z. cifplot: Cifplot plots CIF format files on a screen, printer or plotter. Cifplot reads the .cif file, generates a b/w or color raster dump, and sends it to the printer. Plots can be scaled, clipped, or rotated. Hierarchy depth is selectable, as well as the choice of colormap or fill pattern. An option exists which will compress raster data to reduce the required disk space. For those plotting to a Versatec plotter, there is also a printer filter/driver available called vdmp. cifplot (m2c version, from chiang@m2c.org <Rit Chiang>): The cifplot program from M2C is not in public domain. However, we do provide P.D. CAD tools to university for a fee of $2500/year to cover our cost on distribution, telephone hotline support, documentation and tutorials, etc., under our CUME (Clearinghouse for Undergraduate Microelectronics Education) program. This program, in the past, was sub- sidized by NSF. The cifplot program was modified by M2C to support plotting for B&W PostScript and color PostScript printers, besides the versatec plotters. We also provide plotting services for people who sent us a cif file. The cost is $20/per 24" color versatec plot for University and $50 for oth- ers. For more information on the CUME program or the plotting service, please send e-mail to hotline@m2c.org. oct2ps (available as part of the octtools distribution): It is possible to convert your .mag file to octtools, and then you may use oct2ps to print it. Both cif2ps and oct2ps work well for conversion to postscript. They do look slightly different, so pick your favorite. Note that cif2ps can be converted to adobe encapsulated postscript easily by adding a bounding box comment. oct2ps does convert to color postscript, which can be a plus for those of you with color postscript printers. Flea: Flea ([F]un [L]oveable [E]ngineering [A]rtist) is a program used to plot magic and cif design files to various output devices. Parameters are passed to flea through the flags and flag data or through .flearc files and tech files. Supports: HP7580 plotter, HP7550 hpgl file output, HP7550 plotter lpr output, Postscript file output, Laser Writer lpr out- put, Versatec versaplot random output. Options include: Does line draw- ings with crosshatching for postscript, versatec, and hp plotters. Many options (depth, label depth, scale, path, format...) Available by ftp from zeus.ee.msstate.edu in pub/flea.tar.Z. pplot: Can output color PostScript from CIF files. The source is available from: tesla.ee.cornell.edu in /pub/cad/pplot.tar.Z. It only generates PS files (including color PS), and there's no support for EPS files. It is lim- ited in its support of cif commands. (Wire, roundflash, and delete are not supported.) It only supports manhattan geometry (Polygons and rota- tions may only be in 90 degree multiples.) vic: Part of the U. of Washington's Northwest Lab, for Integrated Systems Cad Tool Release (previously UW/NW VLSI Consortium). Does postscript and HP pen plotters. Only available as part of the package. CIF/Magic -> EPS -> groff/latex Currently no prgram here directly generates EPS files. It is possible to add an EPS bounding box (%% BoundingBox: l t b r) to the output from these programs to get an EPS file. Alternatively, ps2eps or ps2epsf may be used. 5: What tools are used to layout verification? Gemini: This is an excellent program that was done by Carl Ebeling. There is a new version that is currently in beta. This version supports serveral different netlist formats. Devices with any number of terminals are sup- ported. (This could be suitable for use at digital block level LVS, for example.) LVS of mosfet w/l and capacitor values is supported as well. Contact: Carl Ebeling Computer Science Department, FR-35 University of Washington Seattle, WA 98195 ebeling@cs.washington.edu Tanner LVS: This is a relatively inexpensive commercial product, see the section on Tanner tools. Wellchecker: (from MUG) ftp venera.isi.edu (128.9.0.32) netcmp: Part of the caltech tools (see the "Caltech VLSI CAD Tools" section) 6: EDIF data exchange format. (From Nigel Whitaker <nigelw@computer-science.manchester.ac.uk>) The following are published by the Electronic Industries Association: The EDIF Version 2 0 0 Reference Guide (ISBN 0 -7908-0000-4) EIA-1 -- Introduction to EDIF (User Guide) EIA-2 EDIF Connectivity (User Guide) Using EDIF 2 0 0 for Schematic Transfer (TSC Application Note EDIF/P-1) and are available from: Electronic Industries Association Standard Sales Department (Attn: Cecelia Fleming) 2001 Pennsylvania Avenue, N.W. Washington D.C. 20006, USA and American Technical Publishers 27--29 Knowl Piece, Wilbury Way, Hitchin, Hertfordshire, SG4 0SX, UK Tel: +44 462 437933 The University of Manchester publish a set of `Questions and Answers'. These are user's technical questions about EDIF answered by the EDIF technical committee. There are currently 5 volumes. There is also a University of Manchester Technical Report which presents a description of the semantics of EDIF Version 2 0 0. This includes an Information Model of part of EDIF Version 2 0 0 written in EXPRESS. The title of this report (UMCS-6-91) is `Proposal for an Information Model for EDIF', by Rachel Lau. The Questions and Answers and the technical report are available from: Julie Spink EDIF Technical Advisory Centre, Depeartment of Computer Science University of Manchester, Manchester, M13 9PL, UK Tel: +44 61 275 6289, FAX: +44 61 275 6280, e-mail: edif-support@cs.man.ac.uk EDIF Version 2 9 0 has just been released. This was originally expected to be called EDIF Version 2 1 0 but it is felt that the enhancements and changes from the current standard (EDIF Version 2 0 0) are significant enough to choose a name for the version that reflects this. EDIF Version 2 9 0 is an an Official EIA Interim Standard. It contains many improvements for the handling of connectivity and schematics exclud- ing the handling of schematic frames. EDIF Version 3 0 0 is due for release in March 1993. It will consist of EDIF Version 2 9 0 enhanced by solutions to the schematic frames representation plus some additional capabilities. This version will be sumbitted to formal ballot. The EDIF Version 2 9 0 Manual is available from the EIA at the above address. An electronic copy of the BNF, together with other EDIF related information such as tests files, syntax checkers and EDIF documents can be obtained by anonymous ftp from edif.cs.man.ac.uk (130.88.229.234) in subdirectories of /pub/edif An electonic mailing list is available to people interested in EDIF and for EDIF developers/programmers. Send email to edif-support@cs.man.ac.uk to be added. New files are being added, as we have time. If you have any suggestions for things which we should put up for FTP, please email us. We also need people to contribute example EDIF files, which can be made publically available, to our collection, again please email us. (email address is: edif-support@cs.man.ac.uk) 7: What layout examples are available? From MUG: Analog neural network library of cells, 66-bit Manchester carry-skip adder, static ram fabricated at 2-micron, an analog op amp, ftp venera.isi.edu (128.9.0.32) Located in pub/mug. 8: How can I get my lsi design fabbed and how much will it cost? See section on mosis fabrication services as well. (From chiang@m2c.org <Rit Chiang>) M2C can also provide low-cost, low- volume prototyping fab services. The current technology available to the public is the 2um NWell single-poly double-metal process. For pricing information and fab schedule, please send e-mail to hotline@m2c.org. (From MUG 20 George Lewicki of Orbit Semiconductor) Orbit Semiconductor operates an integrated circuit prototyping service that accepts designs each week for all of its processes. The service is available to both U.S. and non-U.S. designers. In- quiries about the FORESIGHT prototyping service should be ad- dressed to George Lewicki. Designs can now be submitted directly via email. Orbit Semiconductor, Inc. 1215 Bordeaux Drive Sunnyvale, CA 94089 TEL: (408)-744-1800 FAX: (408)-747-1263 Email: foresight@orbsemi.com (Contributed by Don Bouldin of the University of Tennessee) Recently, I contacted several foundries to determine which com- panies are interested in fabricating small to moderate lots of wafers for cus- tom CMOS designs. I believe many of the readers of this column are designers who wish to have fabricated only 1,000 to 20,000 parts per year. There are currently several prototyp- ing services (e.g. MOSIS and Orbit) that can produce fewer than 100 parts for about $100 each and there are also several foun- dries which are willing to produce 100,000 custom parts for $5- $20 each (depending on the die size and yield). My purpose was to identify those companies filling the large gap between these two services. The prices in the table below are a result of averaging the data sup- plied by four foundries. The raw data varied by more than +/- 40% so the information should be used only in the early stages of budgetary plan- ning. Once the design specifications are fairly well known, the designer should contact one or more foundries to obtain specific budgetary quotes. As the design nears comple- tion, binding quotes can then be obtained. The following assumptions were made by the foundries: All designs will require custom CMOS wafer fabrication using a double-metal, single-poly process with a feature size between 2.0 and 1.2 microns. The designs may contain some analog circuitry and some RAM so the yield has been calculated pessimistically. The dies will be pack- aged and tested at 1 MHz using a Sentry- type digital tester for 5-10 seconds per part. The customer will furnish the test vectors. Piece Price includes Wafer Fabrication+Die Packaging+Part Testing Size Package Quantity |1,000 | 5,000 | 10,000 | 20,000 |100,000 ----------------------------------------------------------------- 2 mm x 2 mm; 84 PLCC: | $ 27 | $ 6 | $ 5 | $ 4 | $ 3 | 5 mm x 5 mm; 84 PLCC: | $ 31 | $ 12 | $ 8 | $ 7 | $ 6 | 5 mm x 5 mm; 132 PGA: | $ 49 | $ 30 | $ 25 | $ 22 | $ 18 | 7 mm x 7 mm; 132 PGA: | $ 65 | $ 44 | $ 36 | $ 31 | $ 27 | Lithography charges: $ 20,000 - $ 40,000 Preferred Formats: GDS-II or CIF Tapes Additional charges for Second-Poly: $ 5,000 (This is from MUG 19, there is also a list of foundries that these prices were derived from. In the interested of saving space, I have ommitted the list. The list is available from MUG's ftp site included in MUG newsletter #19.) 9: Mosis fabrication services. (From Mosis) Information is available from mosis for pricing and fab schedules through an automatic email system: Mail to mosis@mosis.edu with the message body as follows: REQUEST: INFORMATION TOPIC: TOPICS REQUEST: END for general information and a list of available topics. If you need to contact a person at mosis, you may mail to mosis@mosis.edu with REQUEST: ATTENTION. Also anonymous ftp is available. ftp to ftp.mosis.edu. This is a dupli- cation of all files that are available from the mail server. (From MUG 20 Contributed by Don Bouldin of the University of Tennessee) Multi-project fabrication of BICMOS designs are already available to European universities via CMP and to Canadian universities via the Cana- dian Microelectronic Corporation. However, in the United States, the demand for BiCMOS fabrication via MOSIS has not been considered signifi- cant. MOSIS is currently planning to start offering 0.5-micron BiCMOS during the first quarter of 1994. This will have a core voltage operation of 3.3v and a clock frequency in the range of 220-250Mhz. MOSIS is interested in seeing if a larger demand exists in the community than expressed so far. If you would like to have BiCMOS available before 1994, please send a short note to mosis@mosis.edu (with a copy to bouldin@sun1.engr.utk.edu) using the following format. REQUEST: ATTENTION . . your message goes here . . REQUEST: END (From MUG 20 and Chris Donham of the University of Pennsylvania) Support for mosis technologies under Cadence Analog Artist 2.4 is avail- able as is from University of Pennsylvania. This includes DRC, LVS, EXT, and a beginner's guide. Currently they are working on support for Opus 4.2. The files supporting Artist 2.4 are currently available via anonymous FTP. Penn is not affiliated with MOSIS, except as a satisfied customer, and as a result, NO WARRANTY IS EXPRESSED OR IMPLIED WITH REGARDS TO THE FILES, OR THEIR FITNESS FOR ANY USE. Use the files at your own risk. To obtain the files, FTP to axon.ee.upenn.edu (130.91.6.208), using the name "anonymous" and your mailing address as the password. The files are in the "pub" directory. Penn is in the process of switching from Artist 2.4 to Opus 4.2. The manual is being rewritten, and the support files are being updated. Technology files supporting DRC, Extract, and Compare are currently in beta-test. If problems or bugs are detected, please send email to "cadence@axon.ee.upenn.edu". 10: Archive sites for comp.lsi.cad and comp.lsi (None of these are comprehensive archives, rather, they have about 3 postings each) comp.lsi.cad: cnam.cnam.fr in /pub/Archives/comp.archives/auto/comp.lsi.cad cs.dal.ca in /pub/comp.archives/comp.lsi.cad srawgw.sra.co.jp in /.a/sranha-bp/arch/arch/comp.archives/auto/comp.lsi.cad 11: Other newsgroups that relate to comp.lsi* alt.cad comp.cad.cadence comp.lang.verilog comp.lang.vhdl comp.sys.mentor sci.electronics 12: Simulation programs tips/tricks/bugs Berkeley spice: Pspice: Hspice: If your simulation won't converge for a given DC input, you can ramp the input and print the DC operating point and then set the nodes that way for future simulations. A number of documents are available for information on BSIM model parame- ters: (from Mark Johnson, as posted to comp.lsi <mjohnson@netcom.com>) 1. The very best written description I have seen is in a software manual. The good news is that this manual is free; the bad news is that you have to buy the multi-thousand-dollar program in order to get the free manual. The program is HSPICE from Meta-Software Inc (Campbell, Calif., USA). The HSPICE User's Manual, chapter 7, gives all the details you'd ever want to know regarding BSIM parameters. 2. The second best description I have seen of BSIM is in, strangely enough, a manual for BSIM2 (!). It is available from the University of California at Berkeley. Telephone (510)-643-6687 and they will give you instructions on how to buy the manual. (They'll probably suggest that you might want to buy some software too). J.S. Duster, M.C. Jeng, P.K. Ko, and C. Hu, "Users Guide for the BSIM2 Parameter Extraction Program and the SPICE3 with BSIM Implementation" 3. You can learn some things about BSIM parameters by reading about pro- grams which extract the parameters from measured data. UC Berkeley offers several programs and manuals for this. The one that I person- ally prefer is M.C. Jeng, B.J. Sheu, and P.K. Ko: "BSIM Parameter Extraction - Algorithms and User's Guide," Memo No. UCB/ERL M85/79, 7 October 1985. 4. Next, look at Sheu's Ph.D. thesis. He is the guy who combined the Bell Labs CSIM model with a bunch of other published equations, and formulated BSIM. It's available from the same phone number. B.J. Sheu, "MOS Transistor Modelling and Characterization for Circuit Simulation", Memo No. UCB/ERL M85/85, 26 October 1985 5. The worst description (in +my+ opinion of course) is unfortunately in the most-accessible publication. To save space in the journal they left out some parameter discussions and (again in my opinion) produced a disjointed, not-fully- informative paper. Others may have different views, naturally. B.J. Sheu, D.L. Scharfetter, P-K Ko, M-C Jeng, "BSIM: Berkeley Short-Channel IGFET Model for MOS Transistors," IEEE Journal of Solid-State Circuits, Vol SC-22, No. 4, August 1987, pp. 558-565. 13: Getting the latest version of the FAQ: Mail to clcfaq@eecs.ucdavis.edu with the subject "send faq". If you wish to be added to the FAQ mailing list, send a note to clcfaq@eecs.ucdavis.edu with subject heading 'Subscribe'. You will then have the FAQ regularly emailed to the return address of the note. Like- wise, use the subject heading 'Unsubscribe' to be removed from the list. 14: Converting from/to GDSII/CIF/Magic Magic version 6.3 is capable of reading and writting to all three for- mats. (From the magic man page): calma [option] [args] This command is used to read and write files in Calma GDS II Stream for- mat (version 3.0, corresponding to GDS II Release 5.1). This format is like CIF, in that it describes physical mask layers instead of Magic layers. In fact, the technology file specifies a correspondence between CIF and Calma layers. The current CIF out- put style (see cif ostyle) controls how Calma stream layers are generated from Magic layers. cif [option] [args] Read or write files in Caltech Intermediate Form (CIF). 15: CFI (CAD Framework Initiative Inc.) (From Randy Kirchhof <rkk@cfi.org>) For those of you who may be unfamiliar with our work, The CAD Framework Initiative Inc. was formed in May 1988. We're located in Austin, TX, although we're a distributed company. We're a not-for- profit consortium formed under the laws of the state of Delaware. Our charter is to gain consensus from industry users, the academic community, and vendors, to develop guidelines for an industry acceptable CAD framework implementa- tion. A CAD framework is a software infrastructure which provides a common operating environment for CAD tools. Through a framework, a user should be able to launch and manage tools, create, organize, and manage data, graphically view the entire design process and perform design management tasks such as configuration management, version management, etc. CFI is well into the final stages prior to release 1.0. We recently returned from the DAC convention in Anaheim, where there was an extraor- dinary amount of interest shown in our Pilot project demonstrations. We were able to demonstrate robust, working CFI-compliant software from a large number of member companies. Cooperation in our ongoing effort has been very good from our outset. Also, please be aware that CFI has virtually all of our working documents online, available via anonymous FTP to cfi.org. (192.138.153.1) There is also an e-mailserver. Send an empty message to cfi-server@cfi.org. The mail server & FTP use the same directory. CFI Release 1.0 is on schedule, up for final ballot in October and will be formally released in December of this year. Many vendors will ini- tially release CFI compliant software as early as 2Q 1993. 16: What syn- thesis systems are there? Thanks to Simon Leung <sleung@sun1.atitech.ca>, Michel Berkelaar <michel@ele.tue.nl>, Noritake Yonezawa <yonezawa@cs.uiuc.edu>, Donald A Lobo <lobo@guardian.cs.psu.edu>, Greg Ward <gregw@bnr.ca>, Peter Duzy, Robert Walker <walkerb@turing.cs.rpi.edu> ADPS - Case Western Reserve University, USA - scheduling and data path allocation - Papachristou, C.A. et al.: "A Linear Program Driven Scheduling and Allocation Method Followed by an Interconnect Optimization Algorithm", Proc. of the 27th DAC, pp. 77-83, June 1990. ALPS/LYRA/ARYL - Tsing Hua University - scheduling and data path allocation - Lee, J-H: et al.: "A New Integer Linear Programming Formulation of the Scheduling Problem in Data Path Synthesis", Proc. of ICCAD89, pp. 20-23, November 1989. BDSYN - University of California, Berkeley, USA - FSM synthesis from DECSIM language for multilevel combination-logic realization - Brayton, R.: "Multiple-level Logic Optimization System", Proc. of IEEE ICCAD, Santa Clara, Nov. 1986 BECOME - AT & T Bell Labs, USA - FSM synthesis from C-like language for PLA, PLD and standard cell realization - Wei, R-S.: "BECOME: Behavior Level Circuit Synthesis Based on Structure Mapping", Proc. of 25th ACM/IEEE Design Automation Conference, pp. 409-414, IEEE, 1988 BOLD - logic optimization - Bartlett, K. "Synthesis and Optimization of Multilevel Logic Under Timing Constraints", IEEE Transactions on Computer-Aided Design, Vol 5, No 10, October 1986 BRIDGE - AT & T Bell Labs, USA - High-level synthesis FDL2-language descriptions - Tseng: "Bridge: A Versatile Behavioral Synthesis System", Proc. of 25th ACM/IEEE Design Automation Conference, pp. 415-420, IEEE, 1988 CADDY - Karlsruhe University, Germany - behavioral synthesis from DSL-language, based on data-flow analysis - Camposano, R.: "Synthesing Circuits From Behavioral Descriptions", IEEE Transactions on Computer-Aided Design, Vol. 8, No. 2, February 1989 CALLAS - Siemens, Germany - highlevel, algortihmic and logic synthesis (contains CADDY, see above) - Koster, M. et al.: "ASIC Design Using the High-Level Synthesis System CALLAS: A Case Study", Proc. IEEE International Conference on Computer Design (ICCD '90), pp. 141-146, Cambridge, Massachusetts, Sept. 17-19, 1990 CAMAD - Linkoping University, Sweden - scheduling, data path allocation and iteration from a Pascal subset - Peng, Z.: "CAMAD: A Unified Data Path/ Control Synthesis Environment", Proc. of the IFIP Working Conference on Design Methodologies for VLSI and Computer Architecture, pp. 53-67, Sept. 1988. CARLOS - Karlsruhe University, Germany - multilevel logic optimization for CMOS realizations - Mathony, H-J.: "CARLOS: An Automated Multilevel Logic Design System for CMOS Semi-Custom Integrated Circuits", IEEE Transactions on Computer-Aided Design, Vol 7, No 3, pp. 346-355, March 1988 CATHEDRAL - Univ. of Leuve, Phillips and Siemens, Belgium - synthesis of DSP-circuits from algorithm descriptions - De Man, H.: "Architecture-Driven Synthesis Techiques for VLSI Implementation of DSP Algorithms", Proceedings of the IEEE, Vol. 78, NO. 2, pp. 319, February 1990 CATREE - Univ. of Waterloo, Canada - scheduling and data path allocation - Gebotys, C.H.: "VLSI Design Synthesis with Testability", Proc. of the 25th DAC, pp. 16-21, June 1988 CHARM - AT & T Bell Labs., USA - data-path synthesis - Woo, N-S.: "A Global, Dynamic Register Allocation and Binding for a Data Path Synthesis System", Proc. of the 27th DAC, pp. 505-510, June 1990. CMU-DA (2) - Carnagie-Mellon University, USA - behavioral synthesis from ISPS - Thomas, D.: "Linking the Behavioral and Structural Domains of Representation for Digital System Design", IEEE Transactions on Computer-Aided Design, pp. 103-110, Vol. 6, No. 1, January 1987 CONES - AT & T Bell Labs, USA - FSM synthesis, produces 2-level logic realizations (truth-table) - Stroud, C.E.: "CONES: A System for Automated Synthesis of VLSI and programmable logic from behavioral models", Proc. of IEEE ICCAD, Santa Clara, Nov. 1986. DAGAR - University of Texas, Austin, USA. - scheduling and data-path allocation - Raj. V.K.: "DAGAR: An Automatic Pipelined Microarchitecture Synthesis System", Proc. of ICCD '89, pp. 428-431, October 1989. DELHI - IIT - design iteration, scheduling and data path allocation - Balakrishnan, M. et al.: "Integrated Scheduling and Binding: A Synthesis Approach for Design Space Exploration", Proc. of the 26th DAC, pp. 68-74, June 1989 DESIGN AUTOMATION ASSISTANT (DAA) - AT & T Bell Labs, USA - expert system for data path synthesis - Kowalski, T.J. "The VLSI Desig Automation Assistant: An Architecture Compiler", Silicon Compilation, pp. 122-152, Addison-Wesley, 1988 ELF - Carleton University, Canada - scheduling and data path allocation - Girczyc, E.F. et al.: "Applicability of a Subset of Ada as an Algorithmic Hardware Description Language for Graph-Based Hardware Compilation", IEEE Trans. on CAD, pp. 134-142, April 1985. EUCLID - Eindhoven University of Technology, Netherlands - logic synthesis - Berkelaar, Michel R.C.M. and Theeuwen, J.F.M., "Real Area-Powe-Delay Trade-off in the EUCLID Logic Synthesis System" , proceedings of the Custom Integrated Circuits Conference 1990, Boston MA USA, pp 14.3.1 ff EXLOG - NEC Corporation, Japan - expert system, synthesizes gate level circuits from FDL descriptions - M. Watanabe, et al.,: "EXLOG: An Expert System for Logic Synthesis in Full-Custom VLSI Design", Proc. of 2nd Int. Conf. Application of Artificial Intelligence, August 1987. FACE/PISYN - General Electric, USA - FACE: high-level synthesis tools and a tool framework, PISYN: synthesis of pipelined architecture DSP systems (mostly) - Smith, W.D. et al.: "FACE Core Environment: The Model and it's Application in CAE/CAD Tool Development", Proc. of the 26th DAC, pp. 466-471, June 1989. FLAMEL - Stanford University, USA - data path and control-logic synthesis from Pascal description - Trickey, H. "Flamel: A High-Level Hardware Compiler", IEEE Transactions on Computer-Aided Design, Vol 6, No 2, March 1987. HAL - Carleton University, Canada - data path synthesis - Paulin, P.: "Force-Directed Scheduling for the Behavioral Synthesis of ASIC's", IEEE Transaction on Computer-Aided Design, pp. 661, Vol. 8, No. 6, June 1989. HARP - NTT, Japan - scheduling and data path-allocation from FORTRAN - Tanaka, T. et al.: "HARP: Fortran to Silicon", IEEE Trans. on CAD, pp. 649-660, June 1989. HYPER - UCB, USA - synthesis for realtime applications (scheduling, allocation, module binding, controller design) - Chu, C-M. et al.: "HYPER: An Interactive Synthesis Environment for Real Time Applications", Proc. of ICCD '89, pp. 432-435, October 1989 IMBSL/RLEXT - Univ. of Illinois, USA - data-path allocation, RTL-level design - Knapp D.W.: "Manual Rescheduling and Incremental Repair of Register Level Data Paths", Proc. of ICCAD '89, pp.58-61, November 1989. LSS (Logic Synthesis System) - IBM, USA - logic synthesis and optimization from many RTL-languages - Darringer, J. et al. "LSS: A System for Production Logic Synthesis", IBM Journal of Research and Developement, vol. 28, No. 5, pp. 272-280, Sept 1984. MAHA - University of Southern California, USA - data path synthesis - Parker, A.C. "MAHA: A Program for Data Path Synthesis", Proc. 23rd ACM/IEEE Design Automation Conference, pp. 252-258, IEEE 1986. MIMOLA - University of Dortmund, Germany - scheduling, data-path allocation and controller design - Marwedel, P. "Matching System And Component Behavior in MIMOLA Synthesis Tools", Proc. of EDAC '90, pp. 146-156, March 1990. MIS (II/MV) - University of California, Berkeley, USA - multilevel/multivalued logic optimization - Brayton, R.K. "MIS: A Multiple-Level Logic Optimatization System", IEEE Transactions on Computer-Aided Design, Vol. 6, No. 6, November 1987. pp. 1062-1081 OLYMPUS/HERCULES - Stanford University, USA - behavioral synthesis from C-language (HERCULES), logic and physical synthesis - De Micheli, G.: "HERCULES - A System for High-Level Synthesis", Proceedings of the 25th ACM/IEEE Design Automation Conference, pp. 483-488, IEEE 1988 SEHWA - University of Southern California, USA - pipeline-realizations from behavioral descriptions - Park, N. "SEWHA: A Program for Synthesis of Pipelines", Proc. 23rd ACM/IEEE Design Automation Conference, pp. 454-460, IEEE 1986. SIEMENS' SYNTHESIS SYSTEM - Siemens, Germany - partitioning, data path allocation and scheduling - Scheichenzuber, J. et al.: "Global Hardware Synthesis from Behavioral Dataflow Descriptions", Proc. of the 27th DAC, pp. 456-461, June 1990. SOCRATES - General Electric, University of Colorado, USA - expert system - logic optimization and mapping for different technologies - de Geus, A.J., "The Socrates Logic Synthesis and Optimization System", Design Systems for VLSI Circuits, pp. 473-498, Martinus Nijhoff Publishers, 1987. SPAID - Universty of Waterloo, Canada - DSP-synthesis for silicon compiler realizations - Haroun, B.: "Architectural Synthesis for DSP Silicon Compilers", IEEE Transactions on Computer-Aided Design, pp. 431-447, Vol. 8, No 4, April 1989. SYNFUL - Bell-Northern Research, Canada - RTL and FSM synthesis for a production environment - G. Ward, "Logic Synthesis at BNR: A SYNFUL Story", Proceedings Canadian Conference on Very Large Scale Integration, October 1990. SYSTEM ARCHITECT'S WORKBENCH - Carnagie-Mellon University, USA - behavioral synthesis - Thomas, D. "The System Architect's Workbench", Proceedings of the 25th ACM/IEEE Design Automation Conference, pp. 337-343, IEEE 1988 UCB'S SYNTHESIS SYSTEM - UCB, USA - transformations, scheduling and data path allocation - Devadas, S.: "Algorithms for Hardware Allocation in Data Path Synthesis", IEEE Trans. on CAD, pp. 768-781, July 89 SPLICER - University of Illinois, USA - scheduling and data-path allocation - Pangrle, B.M.: "Splicer: A Heuristic Approach to Connectivity Binding", Proc. of the 25th DAC, pp. 536-541, June 1988. V COMPILER - IBM, USA - scheduling and data path allocation from V-language - Berstis, V: "The V Compiler: Automatic Hardware Design", IEEE Design and Test, pp. 8-17, April 1989. VSS - Univ. of California at Irvine, USA - transformations, scheduling and data path allocation from VHDL to MILO - Lis, J. et al.: "Synthesis from VHDL", Proc. ICCD'88, pp. 378-381, October 1988. YORKTOWN SILICON COMPILER - IBM T.J.Watson Research Centre, USA - data path synthesis, logic synthesis etc. - Brayton, R.K., et al. "The Yorktown Silicon Compiler", Silicon Compilation, pp. 204-311, Addison-Wesley, 1988 17: What free tools are there available, and what can they do? (This section can be viewed as a cross reference to the detailed descrip- tion of software that follows.) Analog VLSI and Neural Systems: Caltech VLSI CAD Tools Automated place and route: octtools, Lager Digital design environment: Galaxy CAD Lsi (polygon) schematic capture: magic, octtools(vem) Layout Verification: caltech tools (netcmp), gemini (Washington Univerity), wellchk (MUG) PCB auto/manual place and route: PADS pcb, PCB (Just for testing lsi designs, of course :) Simulation: irsim(comes with magic), esim, pspice, isplice3, watand, switcap2 Synthesis: octtools, blis, Lager, item, (see section on synthesis) Standard schematic capture: PADS logic, PSPICE for windows 18: What Berkeley Tools are available for anonymous ftp? available from ic.berkeley.edu: (pub) adore: switched capacitor layout generator. (Requires Octtools 5.1 to compile.) bdd: road: analog layout router sis: simplifies both sum-of-products and generic multi-level boolean expressions; it includes many tools including espresso, bdd ext2spice: enhanced ext2spice for use with magic available from gatekeeper.dec.com: (pub/misc) espresso: simplifies sum-of-products boolean expressions 19: What Berkeley Tools are available through ILP? (From MUG 20 Contributed by Carol Block of U. C. Berkeley) A new version of the popular circuit simulator, Spice3F2, is now avail- able from the Industrial Liaison Program (ILP) Office at the University of California, Berkeley. A new release of Octtools will be forthcoming in 1993. Enclosed is a list of software distributed by this office. Adore, BBL.2, Berkeley Building-Block Layout System, Berkeley Computer Integrated Manufacturing System, Parameter Extraction Program for BSIM, Parameter Extraction for BSIM2, Bear-FP, Bert, BLIS, Spice 2G with BSIM Implementation, Cider, Ditroff/Gremlin, Ecstasy, EDIF 2 0 0, Elogic, ES1:Electrostatis 1-Dimensional Periodic Plasma, Franz Lisp, Gabriel, Glitter, IBC: Traveling-Wave-Tube Simulation, IEEE-754 Test Vector, Jsim, Jspice, Lanso, Magic-X11R3-Patch, Magic 1990 Decwrl/Livermore Release, Mahjong, Mighty, Octtools, Parmex Pix-Parmex, Plasma Device Simulation Codes, PLA Tools, Proteus, Ptolemy, Relax, Ritual, Sample, Sample-3D, Additional SAMPLE Documentation, Simpl-IPX and Simpl System 5, SIS, SPAM, Sparse, Spectre, Spice 2G6, Spice 3F2, Additional SPICE Documentation, Splat, Splice 3.0, Supercrystal, SWEC, Tempest, TimberWolf 3.2, Tsize, 1986 VLSI Tools, Wombat. Within a few weeks, a new catalog will be available via anonymous FTP. Users will also be able to obtain forms, ordering instruc- tions and some software via this means. Generally, recipients will have to com- plete an Agreement Form and pay a documentation and handling fee of about $250 per program. ILP can now distribute most of its programs in a variety of media, including: QIC-120, QIC-150, QIC-320, 8mm (2.2 gig), TK 50 (DEC tape for- mat), 9-track 1600 bpi and 9-track 6250 bpi. Visa and Mastercard ord- ers will be accepted on-line by 1993. Most of the software may be freely redistributed either within an organi- zation or to other organiza- tions, both within the United States and abroad, subject to the certain restrictions, including all U.S. Government restrictions, particu- larly those concerning ex- port. For additional information, contact: Industrial Liaison Program 205 Cory Hall Software Distribution Office University of California at Berkeley Berkeley, CA 94720 TEL: (510) 643-6687 FAX: (510) 643-6694 ilpsoftware@hera.berkeley.edu 20: Berkeley Spice (Current version 3f2) (From spice_info on ic.berkeley.edu) Acquiring Spice 3f2 For more information on how to acquire Spice3f2, please send your physi- cal mailing address to "ilpsoftware@berkeley.edu" and request a software catalog. This will give you all of the necessary information for order- ing Spice3f2 and other Berkeley CAD software, including an order form and use agreements. At last check, the cost for spice3f2 was $250.00 (this price may change without notice). Systems supported and Formats Supplied Spice3f2 has been compiled on the following systems: Ultrix 4, RISC or VAX SunOS 4, Sun3 or Sun4 AIX V3, RS/6000 HP-UX 8.0, 9000/700 MS-DOS on the IBM PC, using MicroSoft C 5.1 or later The following systems have been successfully tested either in the past or by someone outside of UC Berkeley. Dynix 3.0, Sequent Symmetry or Balance (does _not_ take advantage of parallelism) HP-UX 7.0, 9000/300 Irix 3.2, SGI Personal Iris NeXT 2.0 Apple MacIntosh, Using Think C Spice3f2 is distributed in source form only. The C compiler "gcc" has been used successfully to compile spice3f2, as well as the standard com- pilers for the systems listed above. Spice3 displays graphs under X11, PostScript, or a graphics-terminal independent library, or as a crude, spice2-like line-printer plot. On the IBM PC, CGA, EGA, and VGA displays are supported through the Micro- Soft graphics library. Note in particular that there is no Suntools interface. Note the the X11 interface to Spice3 expects realease 4 or later, and requires the "Athena Widgets Toolkit" ("Xaw") which may be available only in the "unsupported" portion of your vendor software. A version of "OpenWindows" has problems due to undefined routines during linking -- linking with a null copy of these routines has reportedly worked, but "OpenWindows" has not been tested in any way for this release. Note that for practical performance a math co-processor is required for an IBM PC based on the 286 processor. A math co-processor is also recom- mended for the more advanced IBM PC systems. (from posting to comp.lsi.cad) The Windows NT port of spice3e2, Spice32, is available via ftp from site ftp.cica.indiana.edu, /pub/pc/win3/nt. Filename is spice100.zip. A similar port of nutmeg is included. The Unix distribution comes on 1/2" 9-track tape in "tar" format, TK50 tape (DEC tape), or QIC-150 1/4" cartridge tape (Sun cartridge tape). The MS-DOS distribution comes on several 3.5" floppy diskettes (both high and low density) in the standard MS-DOS format. The contents of both distributions are identical, including file names. New features in 3f2 The following is a list of new features and fixes from the previous major release of Spice3 (3e.2) (see the user's manual for details): AC and DC Sensitivity. MOS3 discontinuity fix ("kappa"). Added a new JFET fitting parameter. Minor initial conditions fix. Rewritten or fixed "show" and "trace" commands. New interactive commands "showmod" and "alter". Minor bug-fixes to the Pole-Zero analysis. Miscellaneous bug fixes in the front end. Additional features since release 3d.2 are: Lossy transmission line model (not available under MS-DOS). Proper calculation of sheet resistance in MOS models. A new command ("where") to aid in debugging troublesome circuits. Smith-chart plots improved. Arbitrary sources in subcircuits handled correctly. Arbitrary source reciprocal calculations and DC biasing now done correctly. Minor bug-fixes to the Pole-Zero analysis. Miscellaneous bug fixes in the front end. A Note on Version Numbering Spice versions are numbered "NXM", where "N" is a number representing the major release (as in re-write), "X" is a letter representing a feature change reflected by a change in the documentation, and "M" is a number indicating a minor revision or bug-patch number. FTP Access and Upgrades There is no anonymous ftp access for the Spice3 source. The manual for spice3f2 (in it's postscript format) is available via anonymous ftp from "ic.berkeley.edu" in the directory "pub/spice3/um.3f.ps/". If you are interested in the troff/me source, contact the email address below (the "make" files and whatnot are somewhat cumbersome for the manual). Patches or upgrades for Spice3 are _not_ normally supplied, however we have made exceptions to this rule, particularly in the case of minor ver- sion changes (such as 3f2 to 3f3). Email Address for Problems Please direct technical inquiries to "spice@berkeley.edu" or "spice- bugs@berkeley.edu" (for now these addresses are the same), and ordering or redistribution queries to "ilpsoftware@berkeley.edu". If you find that your email to "spice" or "spice-bugs" doesn't get a response in a few days, resend your message. 21: Octtools (Current version 5.1) (From the ANNOUNCE-5.1 that comes with it) Octtools is a collection of programs and libraries that form an integrated system for IC design. The system includes tools for PLA and multiple-level logic synthesis, state assignment, standard-cell, gate- matrix and macro-cell placement and routing, custom-cell design, circuit, switch and logic-level simulation, and a variety of utility programs for manipulating schematic, symbolic, and geometric design data. Most tools are integrated with the Oct data manager and the VEM user interface. The software requires UNIX, the window system X11R4 including the Athena Widget Set. The design manager VOV and a few other tools require the C++ compiler g++. Octtools-5.1 have been built and tested on the following combinations of machines and operating systems: DECstation 3100, 5000 running Ultrix 4.1 and 4.2; DEC VAX running Ultrix 4.1 and 4.2; Sun 3 and 4 running OS 4.0 and Sun SparcStation running OS 4.0. The program has been tried on the following machines, but is not supported: Sequent Symmetry, IBM RS/6000 running AIX 3.1. To obtain a copy of Octtools 5.1 (8mm, tk50, or 1/4inch cartridge QIC150) and a printed copy of the documentation) for a $250 distribution charge, see section on Berkeley ILP. Questions may be directed to octtools@ic.berkeley.edu. 22: Lager (Current version 4.0): (From MUG 18) The LAGER system is a set of CAD tools for performing parameterized VLSI design with a slant towards DSP applications (but not limited to DSP applications). A standard cell library, datapath library, several module generators and several pad libraries comprise the cell library. These tools and libraries have originated from UC Berkeley, UCLA, USC, Missis- sippi State, and ITD. The tool development has been funded by DARPA under the Rapid Prototyping Contract headed by Bob Brodersen (UC Berke- ley). LAGER 3.0 was described in MUG 15. Send email to reese@erc.msstate.edu if you are interested in obtaining the toolset via FTP. If you cannot get the distribution via ftp then send one 1/4" 600 ft. tape OR an 8 mm tape (Exabyte compatible) to Bob Reese by phone at (601)-325-3670 or at one of the following addresses: (US Mail Address) P.O. Box 6176 Mississippi State, MS 39762 (FEDEX) 2 Research Boulevard Starkville, MS 39759 Be sure to include a return FEDEX waybill we can use to ship your tape back to you. Instead of sending a tape and FEDX waybill, you can also just send us a check for $75 and we will send you back a tape. Make the check payable to Mississippi State Univ. The tape will be written on a high density tape drive (150 Mb). Older low density SUN tape drives (60 Mb) cannot read this format so you need to have access to one of SUN's newer tape drives. 23: BLIS (Current version 2.0): (From their announcement posted here) BLIS (Behavior-to-Logic Interactive Synthesis) is an environment for the synthesis of digital circuits from high-level descriptions. Version 2.0 supports functional-level synthesis starting from the ELLA hardware description language. Other languages can easily be supported by inter- facing a parser to the internal data-flow representation of BLIS. BLIS is distributed through the Industrial Liason's Program (ILP) Office of the UCB EECS department. The cost of $250 covers media and distribu- tion charges. Binaries are provided for SUN4 and DEC MIPS architectures but BLIS should compile on most other machines supported by the GNU C and C++ compilers (e.g. HP, vax, etc). ELLA language documentation and simu- lator are not supplied with the BLIS distribution, but can be obtained from Computer General. 24: COSMOS and BDD (From their announcement posted here) Obtaining and installing COSMOS and BDD. The COSMOS package generates switch-level simulators for MOS circuits. The BDD package is a subset of COSMOS providing a set of library routines for symbolic Boolean manipulation. To obtain a copy of either COSMOS or BDD via FTP: 1. Create an appropriate subdirectory. For COSMOS, you may want to create a symbolic link /usr/cosmos to this directory, although this is not essential. 2. Connect to the subdirectory 3. FTP to n3.sp.cs.cmu.edu (login anonymous, password yourname@your.host.name) 4. Type: cd /usr/cosmos/ftp ls 5. Select which version of the code you want. The files are named bdd.XXX.YYY.tar.Z and cosmos.XXX.YYY.tar.Z, where XXX.YYY is the ver- sion number. Generally you should select the highest numbered ver- sion. 6. 6. Type: get <FILE> (where <FILE> is the file name of the selected ver- sion). get README quit 7. Follow the instructions in README 8. Send the following information to cosmos@cs.cmu.edu Your name Your postal address Your net address The file retrieved The date of your retrieval COSMOS and BDD are made available with the understanding that no part of it will be redistributed further without permission. Last updated 18 July 1991 by Derek Beatty. 25: ITEM (Taken from the item.news file contained in the package:) The first public release of ITEM, UCSC's logic minimizer using if-then- else DAGs, was made 2 January 1991. The system is available by anonymous ftp from ftp.cse.ucsc.edu, in directory pub/item as a compressed tar archive (item.tar.Z). Also available are tech reports about the algo- rithms and data structures (88-28, 88-29, and 90-43). ITEM can also be found at ftp.cse.ucsc.edu in the pub/item directory. 26: PADS logic/PADS PCB: While this is a commercial product, they have just recently made avail- able a shareware version. This version is fully functional and indenti- cal to their schematic capture and PCB autoplace and route software except that it is limited to about 50 components. It is available for IBM PC/PC compatibles directly from PADS, or from anynonmous ftp at several sites including wuarchive.wustl.edu in /mirrors/msdos/cad/pads*.zip. There is a $50 registration fee if you would like to get future updates from them. 27: Another PCB Layout Package: (from Randy Nevin <randyn@microsoft.com>:) I'm distributing a freely-copyable software package to do autorouting of (1- and 2-layer) printed circuit boards on a PC or compatible. It is written in C (with a little .asm), and all source code is included. There is an autorouter, a board viewer, a rat nest viewer, and some output filters which generate postscript and hp laserjet output files. There is no charge, but I maintain the copyright (it is not public domain). If you want to read about it, I published an article on autorouting algorithms in the sept '89 dr. dobb's journal. ega is required (for the viewing pro- grams). If you'd like to get the software, send me a stamped, self- addressed floppy mailer and a floppy. I can handle 5.25" 360K or 1.2M, or 3.5" 1.4M, but if you send 360K there is some extra code that I won't be able to fit on the disk, so high density is better. I developed this software at home on my own time, and it is not related to what I do for my employer, so I will not use my employer's email resource to distribute it. however, it is available for anonymous ftp access on wsmr-simtel20.army.mil in PD1:<MSDOS.CAD>PCB.ARC, last I heard. I do not keep simtel up to date. But the version there is useable, and does include all source code. Randy Nevin 24135 SE 16th PL Issaquah, WA 98027 28: Magic (Current version 6.3): This is a polygon based lsi layout editor. It is capable of reading and writing magic, calma (version 3.0, corresponding to GDS II Release 5.1), and cif. It is available for anonymous ftp from gatekeeper.dec.com in /pub/DEC/magic. 29: PSpice: This is a commercial product, however, they do have a student version that is available (limited to around 16 transistors).