home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.prime
- Path: sparky!uunet!think.com!rpi!rpigate!x
- From: STEEN@DDS.dent.ohio-state.edu (Steen Hansen)
- Subject: annoying messages from rev 23.3 spooler
- Message-ID: <9211231443.AA02086@usenet.rpi.edu>
- Sender: ListServer@Blx-A.Prime.COM (Prime Netherlands ListServer v1.12)
- Reply-To: Info-Prime@Blx-A.Prime.COM
- Date: Mon, 23 Nov 1992 14:40:16 GMT
- Lines: 26
-
- The 23.3 spooler has a new feature for sending messages to the console.
- It can also display the message on specified users screens.
-
- I get the following message if one of our networked printers are
- off-line for some reason (turned off, out of paper, etc). The Prime
- does not know this is a networked printer, since we handle that on
- the other side of the serial port. I have one printer which is often
- left in such a state, with nothing I can do about it, filling my console
- with these anoying messages generated every six minutes. Is there a
- way I can disable the message to the console, or at least increase the
- time between each repeat?
-
- Thanks
- Steen Hansen
- Ohio State University
-
- *** PATH (user 120 on DDS) at 05:30
- PATH ** Check printer - output buffer full - possible printer fault **
-
- *** PATH (user 120 on DDS) at 05:36
- PATH ** Check printer - output buffer full - possible printer fault **
-
- *** PATH (user 120 on DDS) at 05:42
- PATH ** Check printer - output buffer full - possible printer fault **
-
- ..... ad nauseam ...
-