home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.palmtops
- Path: sparky!uunet!mcsun!Germany.EU.net!rrz.uni-koeln.de!unidui!math.fu-berlin.de!Sirius.dfn.de!darwin.sura.net!uvaarpa!murdoch!galen.med.Virginia.EDU!tpb9k
- From: tpb9k@galen.med.Virginia.EDU (Thomas P. Bleck)
- Subject: Re: Software using Zeos COM port
- Message-ID: <1992Nov22.162743.14224@murdoch.acc.Virginia.EDU>
- Keywords: COM Programming RS232 UART Zeos
- Sender: usenet@murdoch.acc.Virginia.EDU
- Organization: University of Virginia
- References: <1992Nov21.163949.3296@nic.csu.net>
- Date: Sun, 22 Nov 1992 16:27:43 GMT
- Lines: 17
-
- In article <1992Nov21.163949.3296@nic.csu.net> swatson@sparc1.csubak.edu (Sean Watson) writes:
- >Has anyone out on the net been able to use any RS232 software that wasn't
- >supplied in the Zeos Palmtop's ROM (ie, software other than Works, Interlink,
-
- Yes, I've run both Procomm Plus and PCAnywhere 4.5 on the Zeos without any
- problem. A loaded them onto the PCMCIA card as the a: drive. To use them,
- one has to go into the setup program and turn on the serial port, but other
- than this I didn'y experience any problems.
-
- If you have a specific question, I'd be happy to respond via email.
-
-
- --
- Tom Bleck (Thomas P. Bleck, M.D.) tbleck@virginia.edu
- Departments of Neurology and Neurological Surgery
- University of Virginia School of Medicine
- ___________________________________________________________
-