home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!mcsun!fuug!demos!kiae!glas!demos!cco.caltech.edu!palermo
- From: palermo@cco.caltech.edu
- Newsgroups: comp.windows.x
- Date: 17 Jul 92 22:56 MDT
- Subject: X386 Server won't start
- Sender: Notesfile to Usenet Gateway <notes@glas.apc.org>
- Message-ID: <1992Jul17.185650.949@cco.caltech>
- Nf-ID: #N:1992Jul17.185650.949@cco.caltech:-1409753199:001:1029
- Nf-From: cco.caltech.edu!palermo Jul 17 22:56:00 1992
- Lines: 30
-
-
- I just built X11R5 on my Interactive 2.2.1 system. I did the
- make install into the /usr/X386 tree. When I try to bring up
- the server I get the following error
- -------------------------------------------------------------
- X386 Version 1.2 / X Windows System
- (protocol Version 11, revision 0, vendor release 5000)
-
- VGA256: et4000 (mem: 1024k clocks: 25 28 32 36 40 45 50 65)
-
- Fatal server error:
- Mode couldn't be resolved: "1024x768"
- ---------------------------------------------------------------
-
- I looked through all the descriptions of the X386 server. I ran
- the install.sh script provided in the mit/servers/ddx/x386/etc
- directory. The config notes in the x386 dir said there has to be
- a copy of the Xconfig file in /usr/X386, there wasn't, so I copied
- the one provided over.
-
- I have an Orchid Pro Designer II video card which is supported.
- I currently run the X11R3 I got from Interative, so I sure the
- video card should work.
-
- Any help would be greatly appreciated
-
- Please send any repsonses to bob@popeye.jpl.nasa.gov
-
-
-
-