home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ogicse!uwm.edu!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!csn!boulder!hibbard
- From: hibbard@hopper.Colorado.EDU (Kathie Hibbard)
- Newsgroups: comp.unix.ultrix
- Subject: Third Party Drives/4.1 upgrade
- Message-ID: <1992Jul23.215451.16722@colorado.edu>
- Date: 23 Jul 92 21:54:51 GMT
- Article-I.D.: colorado.1992Jul23.215451.16722
- Sender: news@colorado.edu (The Daily Planet)
- Distribution: usa
- Organization: University of Colorado, Boulder
- Lines: 22
- Originator: hibbard@hopper.Colorado.EDU
- Nntp-Posting-Host: hopper.colorado.edu
-
- I'm hoping someone can shed light on this problem for me:
- I have a DS3100 with a WREN V disk running Ultrix 3.0.
- for the last year. In order to initially get the Installation
- disk for Ultrix to see a third party drive, I had to make the necessary
- entries in the install.1 program on tape to add the drive.
- somthing like
-
- UNKNOWN)
- ns=48;nt=15;root_D=WREN;;
-
- This worked quite well and the installation was fooled long enough to
- start the installation and boot from disk.
-
- HOWEVER, now I am trying to install Ultrix version 4.1 on the same
- setup and it will have nothing to do with this. It can't find
- the disk geometry and says it is unsupported for a system disk.
- Could anyone give me insight or information on how to upgrade
- this machine with 4.1?
- Thanks,
- Kathie Hibbard
- 303-492-4720
- hibbard@colorado.EDU
-