home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.sun.hardware:3549 comp.sys.sun.admin:4980 comp.sys.sun.misc:3343
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!ucbvax!bloom-beacon!eru.mt.luth.se!lunic!sunic!ugle.unit.no!Steinar.Haug
- From: Steinar.Haug@delab.sintef.no (Steinar Haug)
- Newsgroups: comp.sys.sun.hardware,comp.sys.sun.admin,comp.sys.sun.misc
- Subject: Can an 8 MByte memory board from a 3/470 be used in a 4/490?
- Message-ID: <STEINAR.HAUG.92Jul26145127@delab.sintef.no>
- Date: 26 Jul 92 12:51:27 GMT
- Sender: news@ugle.unit.no (NetNews Administrator)
- Organization: SINTEF DELAB, Trondheim, Norway.
- Lines: 12
-
- We upgraded our 3/470 to a 4/670, and we now have two old 8 MByte memory
- boards from the 3/470 sitting unused. I was just wondering if these boards
- can be plugged into a 4/490? We have a 4/490 with spare slots and which is
- somewhat short of memory. The boards are populated with 256 kbit chips, and
- the part number is 500110210568 (this is the white strip with the barcode
- on it), with a "-04" and "Rev. 54" printed at the right hand side of the
- white strip.
-
- Steinar Haug, system/networks administrator
- SINTEF DELAB, University of Trondheim, NORWAY
- Email: Steinar.Haug@delab.sintef.no,
- sthaug@idt.unit.no, steinar@tosca.er.sintef.no
-