home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.sun.admin
- Path: sparky!uunet!caen!batcomputer!lynx.msc.cornell.edu!mike
- From: mike@msc.cornell.edu (Mike Heisler)
- Subject: 4.1.1 boot problems on Sparc
- Message-ID: <1992Jul24.155249.10893@msc.cornell.edu>
- Sender: news@msc.cornell.edu
- Organization: Cornell-Materials-Science-Center
- Date: Fri, 24 Jul 1992 15:52:49 GMT
- Lines: 29
-
- I am trying to update a Sparc1 from SunOS 4.1.0 to 4.1.1. I did this
- two weeks ago on another machine configured identically except that
- the first one has 16MB of memory in 1MB sims and this one has 16MB in
- 4MB simms. vmunix loads and then it starts down through the list of
- devices. I get a continous message after the ethernet is listed.
-
- .
- .
- le0 at SBus slot 0 0xc00000 pri 5
- iobus level 8 interupt not serviced
- iobus level 8 interupt not serviced
- iobus level 8 interupt not serviced
- iobus level 8 interupt not serviced
- iobus level 8 interupt not serviced
- iobus level 8 interupt not serviced
- iobus level 8 interupt not serviced
- .
- .
- .
- .
- .
- This occurs from both cdrom and booting from disk. The boot disk configuration
- is a dump/restore from the machine that is working. Any thoughts, ideas?
-
- --
- Mike Heisler 607-255-7344 mike@msc.cornell.edu
- Materials Science Ctr. 302 Thurston Hall Cornell Univ, Ithaca, NY 14853-1503
-
-
-