home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.hardware
- Path: sparky!uunet!stanford.edu!leland.Stanford.EDU!nuntius
- From: Eric Topp <topp@roses.stanford.edu>
- Subject: decode touch-tone phone with Mac?
- Message-ID: <1992Jul24.233559.17582@leland.Stanford.EDU>
- Sender: news@leland.Stanford.EDU (Mr News)
- Organization: Rehabilitation R&D Center Palo Alto VAMC
- X-Useragent: Nuntius v1.1a5
- Date: Fri, 24 Jul 92 23:35:59 GMT
- Lines: 8
-
- Here's a question that's kind of off the wall, but then, this is the
- place for that, right :^). I'd like to decode the signals generated by
- a touch-tone phone so that the Mac can can recognize which phone
- buttons were pressed. Is there a gadget that I can connect to a serial
- port or some elaborate way to use the microphone input?
-
- Thanks,
- Eric
-