home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!zeos!kgermann
- From: kgermann@zeos.com (Ken Germann)
- Subject: Re: Help me hook up a second Hard Drive
- Organization: Zeos International, Ltd.
- Distribution: na
- Date: Thu, 30 Jul 1992 22:06:23 GMT
- Message-ID: <1992Jul30.220623.27501@zeos.com>
- Keywords: maxtor slave hard drive
- References: <Bs465r.KtJ@undergrad.math.waterloo.edu>
- Lines: 27
-
- In article <Bs465r.KtJ@undergrad.math.waterloo.edu> semaurik@descartes.uwaterloo.ca (Sean Maurik) writes:
- > Hi there, I have a 40 meg Maxtor drive (I don't have the model handy) and
- >want to hook it up as a slave hard drive. I currently have an 80Meg quantum
- >Go drive in the machine. Both drives are IDE and so is the controller but
- >no matter what I try I can't get both drives to work. I can get either one
- >to work alone but not both together.
- > Does anyone know how I can get hold of maxtor to ask them about it
- >or does anyone have any ideas of their own that might help. I've tried
- >everything I can think of but with finals approaching thinking is no longer
- >something I'm very good at.
- >
- > Thanks in advance,
- > Sean Maurik
- > semaurik@descartes.uwaterloo.ca
- >
- Set the quantum as primary and the maxtor as secondary. Jumper the
- master and slave jumpers on the Quantum. You shouldn't need
- a slave jumper on the Maxtor. If that doesn't work, jumper the
- Maxtor as a slave.
-
-
-
- --
- Ken Germann support@zeos.com Zeos International, Ltd.
- Press any key to continue. Where is the 'any' key?
-
- Opinions expressed are my own.
-