home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cis.ohio-state.edu!zaphod.mps.ohio-state.edu!wupost!tulane!darwin.sura.net!mips!mips!munnari.oz.au!metro!grivel!neumann.une.edu.au!mmartin
- From: mmartin@neumann.une.edu.au (Mark Martin)
- Newsgroups: comp.sys.atari.st
- Subject: CLA_V1.PRG RUNS ON TOS 1.0 ....
- Message-ID: <mmartin.712246403@neumann.une.edu.au>
- Date: 27 Jul 92 14:13:23 GMT
- Sender: usenet@grivel.une.edu.au
- Lines: 20
-
-
-
- There have been several posts concerning problems running the
- extracted cla_v1.prg, a digital circuit simulator. I was also having
- problems until I used version 2.01h of lharc downloaded from
- atari.archive.umich.edu. The -x switch must be set on lharc.ttp to
- extract to the required directories.
-
- I am using a 1 meg 1040ST with TOS 1.0. The manual says that
- the program will run on a 520 but I get 3 bombs or an error message
- unless there is 700k or more free RAM.
-
- I haven't had a chance to really try the program yet but at
- first glance it looks quite interesting for those people with a
- perverse interest in logic circuits and suchlike.
-
- Mark.
-
- email: mmartin@neumann.une.edu.au
-
-