home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!caen!sdd.hp.com!hp-col!dkm
- From: dkm@col.hp.com (Dave K. Martin)
- Subject: Re: Help on accelerating an A2000 rev 4.x
- Sender: news@col.hp.com (Usenet News)
- Message-ID: <1992Jul27.193117.17694@col.hp.com>
- Date: Mon, 27 Jul 1992 19:31:17 GMT
- References: <eNwJoB1w164w@eastern.COM>
- Organization: HP Colorado Springs Division
- Lines: 28
-
- I've been quite happily using a 25 mhz Mega-Midget Racer in my 4.3 2000 for
- about 18 months. So far I've not had any problems that I can prove to be
- caused by the MMR.
-
- Just for the record, my system consists of:
- A2000 with rev 4.3 motherboard
- A CSA MMR running at 25 mhz with 2m of 32 bit dram, no static ram
- or math chip yet.
- Fat Agnus for 1m chip ram.
- A2091 controller with 2m ram and a 105m Quantum.
- Microbotics 8-UP with 4m ram.
- A2320 Display enhancer with C= 1960 monitor.
- A2088 XT Bridgboard (waiting for the 386 version!).
- Multiport IO adapter for the Bridgeboard.
- Controller for MFM hard drive for the Bridgeboard.
- A 20m MFM hard drive for the Bridgeboard (on a separate power supply)
- An extra fan mounted internally (the 8-UP runs kinda hot)
- Four 3.5 floppy drives for the Amiga.
- One 5.25 and one 3.5 floppy drives on the Bridgeboard.
- A 40m SCSI tape drive on the 2091 using BTNTAPE or Quarterback 5.02.
-
- So far, none of the Zorro II cards I've tried with this system have failed
- to work with the MMR.
-
- ---
- --- Dave Martin - dkm@col.hp.com
- ---
-
-