home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.protocols.tcp-ip.ibmpc
- Path: sparky!uunet!psinntp!digex!thump
- From: thump@access.digex.com (Brian Harrington)
- Subject: Netbios packet driver problems
- Message-ID: <1992Jul29.223951.19708@access.digex.com>
- Organization: Express Access Online Communications, Greenbelt, MD USA
- Distribution: usa
- Date: Wed, 29 Jul 1992 22:39:51 GMT
- Lines: 13
-
- I'm trying to set up a router using LANtastic, ka9q, and the netbios
- packet driver, but I've run into some difficulties. On each of the three
- machines I'm testing with, the nb packet driver gets an incoming packet and
- gives it a destination address of 00:00:c4:c3:cc:c2, which bears no relation
- to the machines' ethernet addresses, IP numbers, or any other number I
- know about, so naturally ka9q doesn't know what to do with the thing. The
- documentation that comes with the driver says that the destination address is
- set based on the local IP address, but it doesn't say how, so I'm wondering
- if I might be leaving something basic out. I'm at a dead end, so any help
- would be appreciated tremendously. Thanks.
-
- --Brian Harrington (thump@access.digex.com)
-
-