home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #16 / NN_1992_16.iso / spool / comp / os / os2 / misc / 25909 < prev    next >
Encoding:
Text File  |  1992-07-29  |  2.2 KB  |  49 lines

  1. Newsgroups: comp.os.os2.misc
  2. Path: sparky!uunet!usc!sol.ctr.columbia.edu!The-Star.honeywell.com!umn.edu!lynx!nmsu.edu!opus!ghenniga
  3. From: ghenniga@NMSU.Edu
  4. Subject: Re: Couple of OS/2 problems...
  5. In-Reply-To: jclei@sage.cc.purdue.edu's message of 28 Jul 92 19:28:31 GMT
  6. Message-ID: <GHENNIGA.92Jul29111724@ampere.ampere>
  7. Sender: usenet@nmsu.edu
  8. Reply-To: ghenniga@NMSU.Edu
  9. Organization: New Mexico State University - Electromagnetics Group
  10. References: <1992Jul28.063753.2983@magnus.acs.ohio-state.edu> <55314@mentor.cc.purdue.edu>
  11. Date: Wed, 29 Jul 1992 18:17:24 GMT
  12. Lines: 35
  13.  
  14.  
  15. In an article jclei@sage.cc.purdue.edu (Jason Lei) writes:
  16. >In article <1992Jul28.063753.2983@magnus.acs.ohio-state.edu> smsmith@magnus.acs.ohio-state.edu (Stephen M Smith) writes:
  17. >>>getting the msd.exe utility from ftp-os2.nmsu.edu.  It's the
  18. >          =======
  19. >
  20. >>>Microsoft OS/2 Diagnostic program.  Be sure to run it full screen
  21. >>>(it's a true OS/2 program).  It's the only hardware analyzer that 
  22. >>  ^^^^^^^^^^^^^^^^^^^^^^^^
  23. >
  24. >>Oops.  It's a DOS program.  It runs so well I thought it was an
  25. >>OS/2 program. :-)
  26. >
  27. >It didn't want to run from the HPFS partition on my machine although no
  28. >problem when running under MS DOS booted from the FAT partition.  Any 
  29. >comments?
  30.  
  31. I have run MSD succesfully on both HPFS and FAT file systems under OS/2. Did
  32. you set the DOS session you tried to run MSD in that it was to report to
  33. MSD.EXE that it was version 4.01 of DOS? 
  34.     Go to the icon for the full screen DOS session in which you run MSD
  35. and open up it's settings notebook (click the second or middle mouse over the
  36. DOS full screen icon, click on the arrow to the right of "Open" in the menu
  37. and then choose "Settings"), go to the "Session" page and click on the "DOS
  38. Settings" button. Next choose the "DOS_VERSION" setting and at the end of
  39. the list type the following line:
  40.         MSD.EXE,4,01,255
  41.  
  42. This means that OS/2 DOS emulation is to report to MSD.EXE that it is running
  43. under DOS 4.01 and that OS/2 is to tell it this up to 255 times. Now click on
  44. the "Save" button in the bottom left and close the notebook. Start your
  45. DOS full screen session and see if MSD will run now. It has for me everytime!
  46.  
  47. Gary Hennigan
  48. (ghenniga@NMSU.Edu)
  49.