home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.linux
- Path: sparky!uunet!math.fu-berlin.de!Sirius.dfn.de!solaris.rz.tu-clausthal.de!ibm.rz.tu-clausthal.de!INABU
- From: INABU@ibm.rz.tu-clausthal.de (Arnd Burghardt)
- Subject: Upgrading from 0.96c pl1 to 0.96c pl2 makes X11 hang
- Message-ID: <16835D062.INABU@ibm.rz.tu-clausthal.de>
- Sender: root@solaris.rz.tu-clausthal.de (Operator)
- Organization: Rechenzentrum der TU CLAUSTHAL
- Date: Fri, 31 Jul 1992 13:49:06 GMT
- Lines: 38
-
- I'm using mcc-interim 0.96c, and made the upgrade to pl1.
- It was not to much traffic, then I decided to go to pl2 (banjo.concert.net).
- Compiling was no problem (german-keybord, boot from /dev/hda1).
- I got the last mount (from banjo in incoming-dir).
- Now come problems :
- no way to mount the DOS-Partition (dev/hda4)
- not any response from X11 anymore.
- switching back to the old Image X11 works fine...
-
- My System is a amd 386/40 - 8Mb-Ram -sigma-legend-II(et4000)
- Seagate St3144 130 Mb At-bus-HDD
- /dev/hda1 7Mb - root
- /dev/hda2 16Mb - swap
- /dev/hda3 64Mb - usr and home
- /dev/hda4 38Mb - dos5.0
-
- Has anybody similar problems - any solutions?
-
- By the way is X11 not the heaven of windowing, but would be nice, if works...
-
-
- Thanks for help
- Arnd Burghardt
-
-
-
-
-
-
- Arnd Burghardt
-
- An der Tillyschanze 4 !
- 3392 Clausthal-Zellerfeld !
- Germany ! INABU@ibm.rz.tu-clausthal.de
- +49 5323 1552 ! INABU@sun.rz.tu-clausthal.de
-
- Remenber what AL says : Save often, save early !
-
-