home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.modems
- Path: sparky!uunet!huracan!hope
- From: hope@huracan.cr (Theodore Hope)
- Subject: Re: WorldBlazers and SLIP
- Message-ID: <1992Jul29.123304.14656@huracan.cr>
- Organization: Proyecto Huracan - Fundacion Nahual / San Jose, Costa Rica
- References: <1992Jul29.021155.2461@mccc.edu>
- Date: Wed, 29 Jul 92 12:33:04 CAM
- Lines: 21
-
-
- In <1992Jul29.021155.2461@mccc.edu> pjh@mccc.edu (P. J. Holsberg) writes:
-
- > What are the proper S-register settings for a WorldBlazer to connect via
- > SLIP using KA9Q?
-
- In general, lock the DTE side at some fixed rate (57,600 in your case),
-
- MAKE SURE you have rts/cts flow control (NO XON/XOFF, OR YOU'LL HAVE PROBLEMS)
- (I think it's s58=2 and s68=2) and tell ka9q that you have it (can't remember
- right now, maybe the "cr" flag to "attach asy" command.) If you have a
- 16550 (probably should if you're going to run as fast as the WB) make sure
- ka9q is recognizing it.
-
- Other than that, the rest will depend on what you want -- autodial when
- the modem turns on, leased line mode, LAPM, Compression, etc....
-
- -Theodore Hope
- Proyecto Huracan - Fundacion Nahual
- San Jose, COSTA RICA
-