home *** CD-ROM | disk | FTP | other *** search
- Comments: Gated by NETNEWS@AUVM.AMERICAN.EDU
- Path: sparky!uunet!uvaarpa!darwin.sura.net!paladin.american.edu!auvm!CUNYVMS1!RMB
- Message-ID: <0095E289.6D68299A.30742@cunyvms1.gc.cuny.edu>
- Date: Sun, 26 Jul 92 16:32:20 EDT
- Sender: Nota Bene List <NOTABENE@TAUNIVM>
- From: Robert Braham <RMB@CUNYVMS1>
- Subject: Re: Blum's UMB+Hyperdsk+Tansi+Windows+NB
- Newsgroups: bit.listserv.notabene
- Lines: 20
-
- From: David J Birnbaum <djbpitt+@PITT.EDU>
- >I was using 4dos
- >and swapping to EMS, and I determined that NB overwrote my EMS page
- >frame. This didn't cause any problem within NB itself, but when I
- >would exit NB, 4dos would be unable to unswap itself from the area NB
- >had trashed. Moving my page frame up from the c000 segment to c400
- >cured the problem.
-
-
- This is done with which switch of EMM386.EXE? It looks pretty formidable
- to me. In fact, Blum's driver screams when used with EMM386., and I
- was fooling around with _his_ .sys EMS driver; I'd be more than happy
- to go back to the old way, in the end, if your advice re EMM386.EXE
- doesn't fly (I'll live w/o the extra UMB space). But as with most
- tinkerings, this takes on a life of its own, and its the principle
- of it that I should get it to work.
-
- Thanks in advance
- Robert Braham
- Internet: RMB@cunyvms1.gc.cuny.edu
-