1202 Insufficient memory. \n Please quit this program.
1203 An error has occurred. \n Please quit this program.
1204 Not enough memory. \n Please quit this program.
1205 Unable to find printer information.\n This program will be terminated.
1206 Unable to communicate with the printer.\n This program will be terminated.
1207 Initalize operation failed.\n This program will be terminated.
1208 Unable to open Printer Status window.
1209 Failed to open Printer Status window.
1210 Unable to open to Paper Memory.
1211 Failed to open Paper Memory Selection window.
1212 Unable to open Monitoring Preferences window.
1213 Failed to open Monitoring Preferences window.
1214 Unable to start Tasktray Icon.
1215 Failed to start Tasktray Icon.
1216 Insufficient memory.
1217 An error has occurred.
1218 Unable to find printer.
1221 Unable to find Tasktray Icon.
1222 Unable to find printer information.
1223 No information is available for this printer.
1224 Could not find specified file.
1225 Failed to open the specified file.
1226 The "Allow monitoring of shared printers" setting is unavailable when\n"IPX/SPX-compatible Protocol" is installed in the Network Configuration\nsettings in the Windows Control Panel.
1227 This program does not support the current operating system.
1228 Unable to monitor current status.\nAfter printing finishes, close all EPSON Status Monitor 3 windows.\nThen, in the driver's Utility menu, click the EPSON Status Monitor 3\nicon button.
1229 Unable to monitor current status.\nClose all EPSON Status Monitor 3 windows and the driver's property.\nThen, in the driver's Utility menu, click the EPSON Status Monitor 3\nicon button. Please restart your computer.
1232 To make the changes take effect, restart your windows.
1233 Currently unable to monitor.\nPlease restart your computer.
1234 Unable to monitor. Clear the [Monitor shared printers] check box\nin the Monitoring Preferences window,and restart your computer.\nThen close all applications, including EPSON Status Monitor 2,\nand re install your printer driver.
1235 Unable to establish bi directional communication.\nPlease re install your printer driver.
1340 10
1360 Monitoring Preferences
1361 Printer Name or Path
1362 Status
1501 A3
1502 A4
1503 A5
1504 A6
1505 B4
1506 B5
1507 LT
1508 HLT
1509 LGL
1510 EXE
1511 GLG
1512 GLT
1513 B
1514 F4
1515 Post card
1516 MON
1517 C10
1518 DL
1519 C5
1520 Unknown Size
1521 User-defined
1522 Unknown Size
1523 A3 Plus
1524 A3W(Plus)
1525 C6
1526 IB5
1601 Plain
1602 Preprinted
1603 Letterhead
1604 Prepunched
1605 Bond
1606 Recycled
1607 Color
1608 Transparency
1609 Labels
2001 Searching...
2002 A communications error has occurred.\nCheck cables and the power supply. If the printer is not ready to print, press the Print Ready button.
2003 You are using a printer that is incompatible with this driver.\nCheck the printer driver and the printer.
2101 An unidentified status has been received from the printer.
2102 The printer status cannot be detected correctly by the currently installed interface card.\nSwitch power OFF and install the correct interface card.
2103 A status confirmation error has occurred.\nCheck all cable connections and make sure the printer is on. This message may appear when a print job is taking a long time to process. This message clears when printing finishes. Check the printer status to make sure printing has not stopped due to another error.
2200 0
2201 1
2202 2
2203 3
2204 4
2205 5
2206 6
2207 7
2208 8
2209 9
3000 Ready to print.
3001 Not ready to print.\nPress the Print Ready button.\nThis message is displayed during setup from the operating panel, and is cleared automatically when setup from the panel is complete.
3002 Printing.\nPlease wait.
3003 Cancelling the job.\nPlease wait.
3004 Resetting the printer.\nPlease wait.
3005 Data being written to ROM module.\nPlease wait.
3006 Warming up.\nPlease wait.
3007 Power saving mode.
3008 Ejecting paper.\nPlease wait.
3009 Printing.
3010 Printing.
3012 Communicating through another port.
3013 Manual feed.\nCheck the paper loaded. Pressing the Error Cancel button causes printing to start.
4000 An unformatted ROM module has been installed.\nWrite data to the ROM module in accordance with the user's manual.\nThis message is cleared by pressing the Error Cancel button.\nIf this message is displayed when a formatted module is installed, there is an error in the ROM module data, or a fault in the ROM module. Either rewrite the data, or switch power OFF and replace the ROM module.
4001 Toner is low.\nObtain a new ET Cartridge.\nPrinting continues even if this message is left displayed. To close this message, press the Error Cancel button.
4002 Print quality will decrease due to insufficient printer memory. It is recommended that more memory be installed.\nWhen printing is halted, halt print processing at the computer, and reset the printer.\nWhen printing has been completed, press the Error Cancel button to clear this message.
4003 Printing speed may be decreased due to insufficient memory. It is recommended that more memory be installed.\nWhen printing is halted, halt print processing at the computer, and reset the printer.\nWhen printing has been completed, press the Error Cancel button to close this message.
4008 There is no paper in the specified source that matches the paper size and paper type setting. Paper that matches only the size setting has been supplied.\nTo temporarily clear this message, press the Error Cancel button.
4009 The paper size or type selected cannot be ejected to the exiting paper unit specified at printing, and it has therefore been output to the face-down tray. Paper of the selected size or type cannot be ejected to the specified paper unit. Therefore, the paper has been output to the face-down tray.\nCheck the paper size and type, then choose an appropriate output tray.\nTo temporarily clear this message, press the Error Cancel button.
4013 As there is too much print data, only some of the specified number of copies have been printed.\nReduce the amount of pages for printing.\nTo temporarily clear this message, press the Error Cancel button.
4014 Printed sheets could not be stapled.\nReduce the amount of pages to be stapled, or select the same paper size for all pages to be stapled.\nTo clear this message, press the Error Cancel button.
4015 Printed sheets could not be stapled.\nCheck the paper size and staple settings.\nTo clear this message, press the Error Cancel button.
4016 The stapler is empty or jammed.\nFill the stapler or remove any jammed staples. Make sure the printed sheets have been stapled.\nTo clear this message, press the Error Cancel button.
4049 Periodic replacement parts will soon need replacement.(0001)\nNote the number and contact your dealer or service center.\nTo temporarily clear this message, press the Error Cancel button.
4052 Periodic replacement parts will soon need replacement.(0004)\nNote the number and contact your dealer or service center.\nTo temporarily clear this message, press the Error Cancel button.
4053 Periodic replacement parts will soon need replacement.(0005)\nNote the number and contact your dealer or service center.\nTo temporarily clear this message, press the Error Cancel button.
4056 Periodic replacement parts will soon need replacement.(0008)\nNote the number and contact your dealer or service center.\nTo temporarily clear this message, press the Error Cancel button.
4057 Periodic replacement parts will soon need replacement.(0009)\nNote the number and contact your dealer or service center.\nTo temporarily clear this message, press the Error Cancel button.
4060 Periodic replacement parts will soon need replacement.(0012)\nNote the number and contact your dealer or service center.\nTo temporarily clear this message, press the Error Cancel button.
4061 Periodic replacement parts will soon need replacement.(0013)\nNote the number and contact your dealer or service center.\nTo temporarily clear this message, press the Error Cancel button.
4561 There is not enough hard disk capacity to install all font of PostScript. If need, please reinstall after uninstall the remaining font.\nTo temporarily clear this message, press the Error Cancel button.
5000 A Print overrun error has occurred.\nPress the Error Cancel button and retry the printing. If the result is the same and the error is reported, cancel that page of data and continue with the next page.\nSet the Page Protect Option on the Device Menu to ON, to prevent this error occurring.
5001 Insufficient memory.\nIt is recommended that more memory be installed.\nPress the Error Cancel button. Pressing the Error Cancel button will cause the pages until the page immediately before the error occurred to be printed.
5003 Selected paper size differs from the loaded paper size.\nMatch the paper size selected to the size of paper actually loaded.\nTo clear this message, press the Error Cancel button.
5004 There is not enough memory to print using the duplex function.\nPress the Error Cancel button to print on the back of the next paper.\nPrint regular Simplex mode.\nTo print using the duplex function, increase the user memory space capacity by:\n1) adding printer memory.\n2) changing the receive buffer capacity setting.\n3) decreasing the printing resolution.
5005 Unable to perform Duplex printing.\nTo print on one side of the sheet, press the Error cancel button on the printer's control panel.
6000 The ET Cartridge is not in place.\nProperly install the ET Cartridge.
6001 Out of toner.\nReplace with new ET Cartridge.
6003 An incompatible ROM module is installed.\nTurn off the printer and replace the ROM module.
6006 Failed to write to the ROM module.\nTurn off the printer and check the ROM module is installed correctly.
6008 Paper is jammed in the printer.\nOpen the cover indicated on the printer's control panel, remove any jammed paper, and close the cover. When the cover is closed, the error status is canceled.\nNote that paper jams may have occurred in more than one location in the printer.
6009 Paper was jammed when being fed into the printer.\nRemove any jammed paper from the MP tray, the Envelope Feeder, or the lower cassettes. Then remove and reinsert the stack of paper in the MP tray or Envelope Feeder, or push the lower cassettes back into the printer.\nNote that paper jams may have occurred in more than one location in the printer.
6010 Paper or the paper cassette is not loaded. Paper is loaded incorrectly, or the paper cassette is not installed correctly.\nReload the paper or reinstall the paper cassette. Printing will resume at the current page.\nPlace paper in the selected cassette and close it. Printing begins automatically when the cassette is closed.
6012 Paper was jammed when being output from the printer.\nOpen the cover indicated on the printer's control panel and remove any jammed sheets, then close the cover.\nNote that paper jams may have occurred in more than one location in the printer.
6013 Paper is loaded in the wrong direction.\nReload the paper so that its length is in the direction of paper feed.
6014 An error has occurred in the optional interface.\nAn incompatible or defective interface card is installed.\nTurn the printer off and remove the interface card. Turn the printer back on a few minutes later.\nIf this message appears again, write this message down and contact your dealer or service center.
6015 The Duplex Unit cover is open.\nClose the Duplex Unit cover.
6017 Paper is jammed in the Duplex Unit.\nOpen the cover DM and cover A and remove any jammed sheets, then close the cover.\nThe jammed page's print data is automatically reprinted along with the rest of the print job.
6035 Cover A is open.\nClose cover A to clear this error message.
6036 Cover B is open.\nClose cover B to clear this error message.
6037 Cover C is open.\nClose cover C to clear this message.
6038 Cover D is open.\nClose cover D to clear this message.
6039 Cover E is open.\nClose cover E to clear this message.
6040 Cover F is open.\nClose cover F to clear this message.
6041 Cover G is open.\nClose cover G to clear this message.
6042 Cover H is open.\nClose cover H to clear this message.
6046 The Staple Stacker is not installed correctly.\nCorrectly install the Staple Stacker.
6047 The Stapler cartridge Cartridge is not installed.\nOpen the Stapler Cover, and install the Stapler Cartridge. Then close the Stapler Cover to clear this message.
6048 The stapler is empty or jammed.\nFill the stapler or remove any jammed staples. Press the Error Cancel button to resume printing.
6084 The installed ET Cartridge is invalid for this printer.\nInstall a valid ET cartridge.
6085 The ET cartridge cannot be recognized.\nInstall the ET cartridge again. If this massage is displayed after that, please replace the new ET Cartridge.
6086 The size of the paper loaded into the cassette is incorrect.\nReload paper of the correct size in the cassette.
6087 No paper tray attached to printer.\nInstall a paper tray.
6089 An identification number of the mechanism controller is not correct. Turn the power off and on again.\nIf an error message appears again, write down the error code displayed and contact your nearest EPSON stating the number.
6090 The face down tray is full.\nRemove the paper from the tray and press the Error Cancel button to resume printing.
6091 Staple Stacker is full.\nRemove the paper from tray %s or all tray on the Staple Stacker. Press the Error Cancel button to resume printing.
6101 Multibin %s is full.\nRemove the paper from the bin %s on the Multibin unit. Press the Error Cancel button to resume printing.
6201 An incompatible PostScript module is installed.\nTurn the printer off and replace the PostScript module.
6202 An error has occurred in the hard disk.\nPlease contact your dealer or service center.
6203 Cannot adjust the Staple Stacker's trays.\nRemove obstacles above or below the Staple Stacker.
6204 The Stapler Cover is open.\nClose the Stapler Cover to clear this message.
8000 A Service Call Error has occurred.\nTurn the power off and check that the optional I/F card, additional memory and ROM module are correctly set.\nWait a few minutes, turn the power on again, and check whether or not the same message is displayed.\nIf this message appears again, write it down and contact report it to your dealer or service center.
9001 An error occurred. When the paper was being fed into or output from the printer.\nError code: %s\nTurn the power off and on again. If the error persists again, write down the error code displayed and contact your nearest EPSON stating the number.
10000 No Information.
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
