1000	6
1001	Not ready
1002	Communication Error
1003	Status confirmation Error
1004	Staple warnings
1005	Toner Low
1006	Other warnings
1100	EPSON Printer Window!3
1101	Printer Information
1102	Monitoring Preferences
1103	Shortcut Icon
1120	Event
1121	Screen Notification
1122	On
1123	Off
1130	Consumable Details...
1131	&About...
1201	EPSON Printer Window!3
1202	Insufficient memory. \n Please quit this program.
1203	An error has occurred. \n Please quit this program. 
1204	Not enough memory. \n Please quit this program.
1205	Unable to find printer information.\n This program will be terminated.
1206	Unable to communicate with the printer.\n This program will be terminated.
1207	Initalize operation failed.\n This program will be terminated.
1208	Unable to open Printer Status window.
1209	Failed to open Printer Status window.
1210	Unable to open to Paper Memory.
1211	Failed to open Paper Memory Selection window.
1212	Unable to open Monitoring Preferences window.
1213	Failed to open Monitoring Preferences window.
1214	Unable to start Tasktray Icon.
1215	Failed to start Tasktray Icon.
1216	Insufficient memory.
1217	An error has occurred.
1218	Unable to find printer.
1221	Unable to find Tasktray Icon.
1222	Unable to find printer information.
1223	No information is available for this printer.
1224	Could not find specified file.
1225	Failed to open the specified file.
1226	The "Allow monitoring of shared printers" setting is unavailable when\n"IPX/SPX-compatible Protocol" is installed in the Network Configuration\nsettings in the Windows Control Panel.
1227	This program does not support the current operating system.
1228	Unable to monitor current status.\nAfter printing finishes, close all EPSON Status Monitor 3 windows.\nThen, in the driver's Utility menu, click the EPSON Status Monitor 3\nicon button.
1229	Unable to monitor current status.\nClose all EPSON Status Monitor 3 windows and the driver's property.\nThen, in the driver's Utility menu, click the EPSON Status Monitor 3\nicon button. Please restart your computer.
1232	To make the changes take effect, restart your windows.
1233	Currently unable to monitor.\nPlease restart your computer.
1234	Unable to monitor. Clear the [Monitor shared printers] check box\nin the Monitoring Preferences window,and restart your computer.\nThen close all applications, including EPSON Status Monitor 2,\nand re install your printer driver.
1235	Unable to establish bi directional communication.\nPlease re install your printer driver.
1340	10
1360	Monitoring Preferences
1361	Printer Name or Path
1362	Status
1501	A3
1502	A4
1503	A5
1504	A6
1505	B4
1506	B5
1507	LT
1508	HLT
1509	LGL
1510	EXE
1511	GLG
1512	GLT
1513	B
1514	F4
1515	Post card
1516	MON
1517	C10
1518	DL
1519	C5
1520	Unknown Size
1521	User-defined
1522	Unknown Size
1523	A3 Plus
1524	A3W(Plus)
1525	C6
1526	IB5
1601	Plain
1602	Preprinted
1603	Letterhead
1604	Prepunched
1605	Bond
1606	Recycled
1607	Color
1608	Transparency
1609	Labels
2001	Searching...
2002	A communications error has occurred.
\nCheck cables and the power supply. If the printer is not ready to print, press the Print Ready button.
2003	You are using a printer that is incompatible with this driver.
\nCheck the printer driver and the printer.
2101	An unidentified status has been received from the printer.
2102	The printer status cannot be detected correctly by the currently installed interface card.
\nSwitch power OFF and install the correct interface card.
2103	A status confirmation error has occurred.
\nCheck all cable connections and make sure the printer is on. This message may appear when a print job is taking a long time to process. This message clears when printing finishes. Check the printer status to make sure printing has not stopped due to another error.
2200	0
2201	1
2202	2
2203	3
2204	4
2205	5
2206	6
2207	7
2208	8
2209	9
3000	Ready to print.
3001	Not ready to print.
\nPress the Print Ready button.
\nThis message is displayed during setup from the operating panel, and is cleared automatically when setup from the panel is complete.
3002	Printing.
\nPlease wait.
3003	Cancelling the job.
\nPlease wait. 
3004	Resetting the printer.
\nPlease wait.
3005	Data being written to ROM module.
\nPlease wait.
3006	Warming up.
\nPlease wait.
3007	Power saving mode.
3008	Ejecting paper.
\nPlease wait.
3009	Printing.
3010	Printing.
3012	Communicating through another port.
3013	Manual feed.
\nCheck the paper loaded. Pressing the Error Cancel button causes printing to start.
4000	An unformatted ROM module has been installed.
\nWrite data to the ROM module in accordance with the user's manual.
\nThis message is cleared by pressing the Error Cancel button.
\nIf this message is displayed when a formatted module is installed, there is an error in the ROM module data, or a fault in the ROM module. Either rewrite the data, or switch power OFF and replace the ROM module.
4001	Toner is low.
\nObtain a new ET Cartridge.
\nPrinting continues even if this message is left displayed. To close this message, press the Error Cancel button.
4002	Print quality will decrease due to insufficient printer memory. It is recommended that more memory be installed.
\nWhen printing is halted, halt print processing at the computer, and reset the printer.
\nWhen printing has been completed, press the Error Cancel button to clear this message.
4003	Printing speed may be decreased due to insufficient memory. It is recommended that more memory be installed.
\nWhen printing is halted, halt print processing at the computer, and reset the printer.
\nWhen printing has been completed, press the Error Cancel button to close this message.
4008	There is no paper in the specified source that matches the paper size and paper type setting. Paper that matches only the size setting has been supplied.
\nTo temporarily clear this message, press the Error Cancel button.
4009	The paper size or type selected cannot be ejected to the exiting paper unit specified at printing, and it has therefore been output to the face-down tray. Paper of the selected size or type cannot be ejected to the specified paper unit. Therefore, the paper has been output to the face-down tray.
\nCheck the paper size and type, then choose an appropriate output tray.
\nTo temporarily clear this message, press the Error Cancel button.
4013	As there is too much print data, only some of the specified number of copies have been printed.
\nReduce the amount of pages for printing.
\nTo temporarily clear this message, press the Error Cancel button.
4014	Printed sheets could not be stapled.
\nReduce the amount of pages to be stapled, or select the same paper size for all pages to be stapled.
\nTo clear this message, press the Error Cancel button.
4015	Printed sheets could not be stapled.
\nCheck the paper size and staple settings.
\nTo clear this message, press the Error Cancel button.
4016	The stapler is empty or jammed.
\nFill the stapler or remove any jammed staples. Make sure the printed sheets have been stapled.
\nTo clear this message, press the Error Cancel button.
4049	Periodic replacement parts will soon need replacement.(0001)
\nNote the number and contact your dealer or service center.
\nTo temporarily clear this message, press the Error Cancel button.
4052	Periodic replacement parts will soon need replacement.(0004)
\nNote the number and contact your dealer or service center.
\nTo temporarily clear this message, press the Error Cancel button.
4053	Periodic replacement parts will soon need replacement.(0005)
\nNote the number and contact your dealer or service center.
\nTo temporarily clear this message, press the Error Cancel button.
4056	Periodic replacement parts will soon need replacement.(0008)
\nNote the number and contact your dealer or service center.
\nTo temporarily clear this message, press the Error Cancel button.
4057	Periodic replacement parts will soon need replacement.(0009)
\nNote the number and contact your dealer or service center.
\nTo temporarily clear this message, press the Error Cancel button.
4060	Periodic replacement parts will soon need replacement.(0012)
\nNote the number and contact your dealer or service center.
\nTo temporarily clear this message, press the Error Cancel button.
4061	Periodic replacement parts will soon need replacement.(0013)
\nNote the number and contact your dealer or service center.
\nTo temporarily clear this message, press the Error Cancel button.
4561	There is not enough hard disk capacity to install all font of PostScript. If need, please reinstall after uninstall the remaining font.
\nTo temporarily clear this message, press the Error Cancel button.
5000	A Print overrun error has occurred.
\nPress the Error  Cancel button and retry the printing. If the result is the same  and the error is reported, cancel that page of data and continue with the next page.
\nSet the Page Protect Option on the Device Menu to ON, to prevent this error occurring.
5001	Insufficient memory.
\nIt is recommended that more memory be installed.
\nPress the Error Cancel button. Pressing the Error Cancel button will cause the pages until the page immediately before the error occurred to be printed. 
5003	Selected paper size differs from the loaded paper size.
\nMatch the paper size selected to the size of paper actually loaded.
\nTo clear this message, press the Error Cancel button.
5004	There is not enough memory to print using the duplex function.
\nPress the Error Cancel button to print on the back of the next paper.
\nPrint regular Simplex mode.
\nTo print using the duplex function, increase the user memory space capacity by:
\n1) adding printer memory.
\n2) changing the receive buffer capacity setting.
\n3) decreasing the printing resolution.
5005	Unable to perform Duplex printing.
\nTo print on one side of the sheet, press the Error cancel button on the printer's control panel.
6000	The ET Cartridge is not in place.
\nProperly install the ET Cartridge.
6001	Out of toner.
\nReplace with new ET Cartridge.
6003	An incompatible ROM module is installed.
\nTurn off the printer and replace the ROM module.
6006	Failed to write to the ROM module.
\nTurn off the printer and check the ROM module is installed correctly.
6008	Paper is jammed in the printer.
\nOpen the cover indicated on the printer's control panel, remove any jammed paper, and close the cover. When the cover is closed, the error status is canceled.
\nNote that paper jams may have occurred in more than one location in the printer.
6009	Paper was jammed when being fed into the printer.
\nRemove any jammed paper from the MP tray, the Envelope Feeder, or the lower cassettes. Then remove and reinsert the stack of paper in the MP tray or Envelope Feeder, or push the lower cassettes back into the printer.
\nNote that paper jams may have occurred in more than one location in the printer.
6010	Paper or the paper cassette is not loaded. Paper is loaded incorrectly, or the paper cassette is not installed correctly.
\nReload the paper or reinstall the paper cassette. Printing will resume at the current page.
\nPlace paper in the selected cassette and close it. Printing begins automatically when the cassette is closed.
6012	Paper was jammed when being output from the printer.
\nOpen the cover indicated on the printer's control panel and remove any jammed sheets, then close the cover.
\nNote that paper jams may have occurred in more than one location in the printer.
6013	Paper is loaded in the wrong direction.
\nReload the paper so that its length is in the direction of paper feed.
6014	An error has occurred in the optional interface.
\nAn incompatible or defective interface card is installed.
\nTurn the printer off and remove the interface card. Turn the printer back on a few minutes later.
\nIf this message appears again, write this message down and contact your dealer or service center.
6015	The Duplex Unit cover is open.
\nClose the Duplex Unit cover.
6017	Paper is jammed in the Duplex Unit.
\nOpen the cover DM and cover A and remove any jammed sheets, then close the cover.
\nThe jammed page's print data is automatically reprinted along with the rest of the print job.
6035	Cover A is open.
\nClose cover A to clear this error message.
6036	Cover B is open.
\nClose cover B to clear this error message.
6037	Cover C is open.
\nClose cover C to clear this message.
6038	Cover D is open.
\nClose cover D to clear this message.
6039	Cover E is open.
\nClose cover E to clear this message.
6040	Cover F is open.
\nClose cover F to clear this message.
6041	Cover G is open.
\nClose cover G to clear this message.
6042	Cover H is open.
\nClose cover H to clear this message.
6046	The Staple Stacker is not installed correctly.
\nCorrectly install the Staple Stacker.
6047	The Stapler cartridge Cartridge is not installed.
\nOpen the Stapler Cover, and install the Stapler Cartridge. Then close the Stapler Cover to clear this message.
6048	The stapler is empty or jammed.
\nFill the stapler or remove any jammed staples. Press the Error Cancel button to resume printing.
6084	The installed ET Cartridge is invalid for this printer.
\nInstall a valid ET cartridge.
6085	The ET cartridge cannot be recognized.
\nInstall the ET cartridge again. If this massage is displayed after that, please replace the new ET Cartridge.
6086	The size of the paper loaded into the cassette is incorrect.
\nReload paper of the correct size in the cassette.
6087	No paper tray attached to printer.
\nInstall a paper tray.
6089	An identification number of the mechanism controller is not correct. Turn the power off and on again.
\nIf an error message appears again, write down the error code displayed and contact your nearest EPSON stating the number.
6090	The face down tray is full.
\nRemove the paper from the tray and press the Error Cancel button to resume printing.
6091	Staple Stacker is full.
\nRemove the paper from tray %s or all tray on the Staple Stacker. Press the Error Cancel button to resume printing.
6101	Multibin %s is full.
\nRemove the paper from the bin %s on the Multibin unit. Press the Error Cancel button to resume printing.
6201	An incompatible PostScript module is installed.
\nTurn the printer off and replace the PostScript module.
6202	An error has occurred in the hard disk.
\nPlease contact your dealer or service center.
6203	Cannot adjust the Staple Stacker's trays.
\nRemove obstacles above or below the Staple Stacker.
6204	The Stapler Cover is open.
\nClose the Stapler Cover to clear this message.
8000	A Service Call Error has occurred.
\nTurn the power off and check that the optional I/F card, additional memory and ROM module are correctly set.
\nWait a few minutes, turn the power on again, and check whether or not the same message is displayed.
\nIf this message appears again, write it down and contact report it to your dealer or service center.
9001	An error occurred. When the paper was being fed into or output from the printer.
\nError code: %s
\nTurn the power off and on again. If the error persists again, write down the error code displayed and contact your nearest EPSON stating the number.
10000	No Information.
61440	Open
61441	Save As
61442	All Files (*.*)
61443	Untitled
61446	an unnamed file
61457	&Hide
61472	No error message is available.
61473	An unsupported operation was attempted.
61474	A required resource was unavailable.
61475	Out of memory.
61476	An unknown error has occurred.
61696	Invalid filename.
61697	Failed to open document.
61698	Failed to save document.
61699	Save changes to %1?
61700	Failed to create empty document.
61701	The file is too large to open.
61702	Could not start print job.
61703	Failed to launch help.
61704	Internal application error.
61705	Command failed.
61706	Insufficient memory to perform operation.
61707	System registry entries have been removed and the INI file (if any) was deleted.
61708	Not all of the system registry entries (or INI file) were removed.
61709	This program requires the file %s, which was not found on this system.
61710	This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712	Please enter an integer.
61713	Please enter a number.
61714	Please enter an integer between %1 and %2.
61715	Please enter a number between %1 and %2.
61716	Please enter no more than %1 characters.
61717	Please select a button.
61718	Please enter an integer between 0 and 255.
61719	Please enter a positive integer.
61720	Please enter a date and/or time.
61721	Please enter a currency.
61728	Unexpected file format.
61729	%1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730	Destination disk drive is full.
61731	Unable to read from %1, it is opened by someone else.
61732	Unable to write to %1, it is read-only or opened by someone else.
61733	An unexpected error occurred while reading %1.
61734	An unexpected error occurred while writing %1.
61836	Unable to read write-only property.
61837	Unable to write read-only property.
61840	Unable to load mail system support.
61841	Mail system DLL is invalid.
61842	Send Mail failed to send message.
61856	No error occurred.
61857	An unknown error occurred while accessing %1.
61858	%1 was not found.
61859	%1 contains an invalid path.
61860	%1 could not be opened because there are too many open files.
61861	Access to %1 was denied.
61862	An invalid file handle was associated with %1.
61863	%1 could not be removed because it is the current directory.
61864	%1 could not be created because the directory is full.
61865	Seek failed on %1
61866	A hardware I/O error was reported while accessing %1.
61867	A sharing violation occurred while accessing %1.
61868	A locking violation occurred while accessing %1.
61869	Disk full while accessing %1.
61870	An attempt was made to access %1 past its end.
61872	No error occurred.
61873	An unknown error occurred while accessing %1.
61874	An attempt was made to write to the reading %1.
61875	An attempt was made to access %1 past its end.
61876	An attempt was made to read from the writing %1.
61877	%1 has a bad format.
61878	%1 contained an unexpected object.
61879	%1 contains an incorrect schema.
61888	pixels