Step 1: Make sure the downloaded BIOS is applicable to your motherboard.
(Please check the model and the version of your motherboard.)
Step 2: Power on the system and enter the pure DOS Mode.
(It is not allowed to update BIOS under Windows DOS Mode.)
Step 3: Build a new temporary subdirectory,copy the down loaded file to the Subdirectory.
Step 4: Go to the temporary subdirectory and run the downloaded file. Because this is a compressed file, you need to de-compress it first. Please remember the full filename of ".BIN" file, which is one of these de-compressed files.
Step 5: Run "AWDFLASH.EXE "
Step 6: Type the file name of the new BIOS according to the instruction.
(The file name is " *.BIN ")
Step 7: Press "Y" when AWDFLASH.EXE asks whether or not you are going to save the old BIOS.
Step 8: Type a file name for the old BIOS. Then Press "Enter".
Step 9: Type "Y" when AWDFLASH.EXE asks if you are going to update the BIOS.
(NOTE: Don't power down the system or press <Alt+Ctrl+Del> before you finish updating BIOS, or it will cause the system to hang permanently.)
Step 10: Please reboot your computer after you finish updating the BIOS.
Step 11: Press <Del> to enter BIOS setup to execute "LOAD SETUP DEFAULTS."