How to update the BIOS ?
 
 Step 1: Make sure the downloaded BIOS is applicable to your motherboard. 
(Please check the model and the version of your motherboard.)  
 Step 2: Power on the system and enter the pure DOS Mode. 
(It is not allowed to update BIOS under Windows DOS Mode.)  
 Step 3: Build a new temporary subdirectory,copy the down loaded file to the Subdirectory.  
 Step 4: Go to the temporary subdirectory and run the downloaded file. Because this is a compressed file, you need to de-compress it first. Please remember the full filename of ".BIN" file, which is one of these de-compressed files.  
 Step 5: Run "AWDFLASH.EXE "  
 Step 6: Type the file name of the new BIOS according to the instruction. 
(The file name is " *.BIN ")  
 Step 7: Press "Y" when AWDFLASH.EXE asks whether or not you are going to save the old BIOS.  
 Step 8: Type a file name for the old BIOS. Then Press "Enter".  
 Step 9: Type "Y" when AWDFLASH.EXE asks if you are going to update the BIOS. 
(NOTE: Don't power down the system or press <Alt+Ctrl+Del> before you finish updating BIOS, or it will cause the system to hang permanently.)  
 Step 10: Please reboot your computer after you finish updating the BIOS.  
 Step 11: Press <Del> to enter BIOS setup to execute "LOAD SETUP DEFAULTS."