home *** CD-ROM | disk | FTP | other *** search
/ OS/2 Shareware BBS: OtherApp / OtherApp.zip / efz.zip / DEMO2.XEX / EFZ001H.MSG (.txt) < prev    next >
OS/2 Message File  |  1994-08-02  |  37KB  |  589 lines

  1. MKMSGF
  2. %`&$'
  3. 1!2&3h3
  4. 435u5
  5. 5;6X6
  6. 8k9/:q:v;:<
  7. ?m@rA
  8. GWHtH
  9. K*LGLdL
  10. M/MLMiM
  11. M'NiN
  12. N.OpO
  13. X+YmY
  14. Y2ZtZ
  15. Zz[>\
  16. bfc*d/e
  17. iEi    j
  18. rvs{t
  19. z {%|
  20. HVisualGen Developer Version 1 Release 0 EZE001H.MSG 5648-040   
  21. HAll open blocks are closed at the PA tag.                      
  22. You should insert the appropriate closing tag in your tutorial 
  23. and restart.                                                   
  24. HThe given tag is not allowed in the startup file.              
  25. You should remove the tag from the startup file and restart.   
  26. HA wrong tag was used to close the currently active block.      
  27. You should correct the tag and restart.                        
  28. HThe currently active type of menu does not match the specified 
  29. end tag. You should correct the tag and restart.               
  30. HUse the correct Tutorial Manager/2 version, or compile the     
  31. package again.                                                 
  32. HSupply the correct tutorial name when you start the tutorial.  
  33. HDelete the PRESPARAM statement(s) in the resource and try      
  34. again.                                                         
  35. HCheck the LIBPATH statement in your CONFIG.SYS, and make sure  
  36. the indicated DLL is located in one of the directories         
  37. listed in the LIBPATH statement.                               
  38. HProvide a valid startup file and restart Tutorial Manager/2.   
  39. HThe specified package does not contain a startup file.         
  40. Check the contents of the package and re-compile the tutorial. 
  41. HTutorial file(s) are required in author's mode.                
  42. Supply at least one tutorial file in startup file, and restart 
  43. the tutorial.                                                  
  44. HTutorial file(s) are required in author's mode.                
  45. Provide the tutorial file tag (:TUTFILES), and at least one    
  46. tutorial file in the startup file.                             
  47. HThe Tutorial Manager/2 needs a profile file.                   
  48. Provide the profile tag (:PROFILE), and the profile file name  
  49. in the startup file.                                           
  50. HUnused                                                         
  51. HUse a smaller set of directories where your tutorial files     
  52. are located.                                                   
  53. HFree system memory by reducing the amount of currently active  
  54. sessions. Check if memory swapping is active and if the        
  55. swapper has enough disk space left to do swapping.             
  56. HSpecify correct directory or DPATH and try again               
  57. HPlease contact your IBM representative and tell him the        
  58. conditions and error code !                                    
  59. HSpecify the startup file name in the command line              
  60. HSpecify the name of a valid package file                       
  61. HSpecify the name of an existing package and retry.             
  62. HRemove some windows or window controls from the current PA     
  63. section and restart the tutorial.                              
  64. H!! no help text defined !!
  65. HYou specified an incorrect value or more than one value.       
  66. The tag is ignored. You should correct the error and restart.  
  67. HYou specified an incorrect value or more than one value.       
  68. The tag is ignored. You should correct the error and restart.  
  69. HYou should remove the duplicate attribute and restart.         
  70. HThe given tag accepts no attributes.                           
  71. You should remove the attribute and restart.                   
  72. HYou specified an attribute without a value.                    
  73. You should either specify a value or remove the attribute      
  74. and restart.                                                   
  75. HYou should check the tag for conflicting attributes, remove    
  76. one attribute and restart.                                     
  77. HAn ID was specified which does not exist or cannot be used     
  78. with this tag. You could use the Debug Panel to check, if the  
  79. ID exists and if the object, the ID refers to, has the correct 
  80. type. Then correct the error and restart the tutorial.         
  81. HThe referenced ID exists more than once. You should either     
  82. use unique IDs or add the ID of the owning window to the       
  83. reference.                                                     
  84. HYou specified an ID which already exists.                      
  85. If you select OK, the previous definition will be deleted.     
  86. HYou should either correct the specified ID or remove the       
  87. invalid attribute and restart.                                 
  88. HYou specified an attribute which is not allowed with this      
  89. tag. You should correct the tag and restart.                   
  90. HSuperfluous attributes are ignored. You should remove the      
  91. attributes and restart.                                        
  92. HThe tag was already specified in the startup file and will     
  93. be ignored. You should correct the startup file and restart.   
  94. HEither correct the file name, or remove it.                    
  95. If the tutorial may be continued, a continue button is         
  96. offered as a choice.                                           
  97. If you continue the tutorial, the file specified cannot be     
  98. loaded                                                         
  99. HAll files, except bitmap files and metafiles, must not         
  100. exceed 64K in size.  Split the file, if possible.              
  101. If the tutorial can be continued, the Continue push button     
  102. is available.                                                  
  103. If you continue the tutorial, the file specified cannot be     
  104. loaded.                                                        
  105. HEither correct the file name, remove it, or supply the file.   
  106. If you continue the tutorial, the file specified cannot be     
  107. loaded.                                                        
  108. HYou can use the FULLSCREEN style in SIMULATE or MAXIMZE mode.  
  109. HSpecify the number of an existing menu resource or remove      
  110. the MENU style.                                                
  111. HIf you continue, the menu will be created without the          
  112. specified item or pulldown. Please refer to the                
  113. documentation for all supported styles.                        
  114. HThe tag will be ignored. You should correct the styles and     
  115. restart.                                                       
  116. HYou should provide a numeric value for the ENDRC statement     
  117. and restart.                                                   
  118. HThe tag accepts only one filename. You should correct the      
  119. tag and restart.                                               
  120. HEither you specified a wrong filename or the file is damaged.  
  121. HThe given tag is unknown to Tutorial Manager/2.                
  122. Check the tag for correct spelling or remove it and restart.   
  123. HThe given tag was used out of context. The tag will be ignored.
  124. Example: a :HP tag may only be used within a text section.     
  125. Either remove the tag or put it in the correct context.        
  126. HThe tag will be ignored. You should correct the styles and     
  127. restart.                                                       
  128. H!! no help text defined !!
  129. H!! no help text defined !!
  130. H!! no help text defined !!
  131. HEither no file has been specified or the specified file is not 
  132. a valid imbed file. The tag is ignored. You should correct     
  133. the tag and restart.                                           
  134. HThere was no valid FILE and/or REFID attribute specified.      
  135. You should add the missing attribute or correct the tag and    
  136. restart.                                                       
  137. H!! no help text defined !!
  138. HUnused                                                         
  139. HYou specified an incorrect condition that cannot be evaluated. 
  140. You should correct the condition specification and restart.    
  141. HUnused                                                         
  142. HYou specified a LEAVE tag, but no loop was active.             
  143. You should either remove the LEAVE tag or check the position   
  144. of the tag and restart.                                        
  145. HAn error occurred when opening the file. Check if the file     
  146. exists or if it is locked by another process and restart.      
  147. HAn error occurred when reading the file. Check if the file     
  148. exists or if it is locked by another process and restart.      
  149. HAn error occured while processing a file. This is probably     
  150. an internal error.                                             
  151. HAn error occurred when reading a file. Check if the file       
  152. exists or if it is locked by another process and restart.      
  153. HAn error occured while writing to a file. Check if there is    
  154. enough space on the disk/diskette or if the file is locked     
  155. by another process.                                            
  156. HAn error occured while closing a file. This is probably an     
  157. internal error.                                                
  158. HYou tried to use a tag which is only allowed within a window   
  159. definition. The tag will be ignored. Check the position of the 
  160. tag or remove it and restart.                                  
  161. HYou used a DEFWINDOW tag inside a window definition. The tag   
  162. will be ignored. You should check the position of the tag or   
  163. remove it and restart.                                         
  164. HAn attribute which is mandatory for this tag was not specified.
  165. The tag will be ignored. You should specify the missing        
  166. attribute and restart.                                         
  167. HYou specified an ACTIONBAR tag, even though actionbar is       
  168. already active.                                                
  169. Correct your tag and try again                                 
  170. HThe specified menu item ID is not a predefined one.            
  171. Correct your tag and try again                                 
  172. HThe system detected a menu type which is not allowed.          
  173. Report the error conditions.                                   
  174. HNot all required attributes for a specific style were          
  175. specified. Change the style or add the missing attribute and   
  176. retry.                                                         
  177. HThe string pool is full.                                       
  178. HThere is no character message which can be passed to the       
  179. system, or it is not safe to pass the message because there    
  180. has been other message processing in between                   
  181. HCorrect the size/position value and try again.                 
  182. HAn EDEFWINDOW is detected before all opened structures are     
  183. closed.                                                        
  184. Correct the error and try again.                               
  185. HYou specified an incorrect value or more than one value.       
  186. Correct the error and try again.                               
  187. HYou specified an incorrect value or more than one value.       
  188. Correct the error and try again.                               
  189. Hyou specified a start of a list ("(") within an already opened 
  190. list.                                                          
  191. Correct the error and try again.                               
  192. If you decide to continue, the attribute value will be ignored.
  193. Hyou specified an end of a list (")"), but no list is opened.   
  194. Correct the error and try again.                               
  195. If you decide to continue, the attribute value will be ignored.
  196. HAn opened list is pending.                                     
  197. Correct the error and try again.                               
  198. If you decide to continue, the attribute value will be ignored.
  199. HThe specified value of an attribute is longer than allowed.    
  200. Correct the error and try again.                               
  201. If you decide to continue, the attribute value will be ignored.
  202. HThe specified value of an attribute is not recognized.         
  203. Correct the error and try again.                               
  204. If you decide to continue, the attribute value will be ignored.
  205. HThe specified main window type is not recognized.              
  206. Correct the error and try again.                               
  207. HUnused                                                         
  208. HThe specified string is not a valid ID.                        
  209. Change the error and try again.                                
  210. HYou used a tag which would produce unpredictable results       
  211. during processing of an INITMENU event. Please use only tags   
  212. that change the enabled/disabled or checked/unchecked style    
  213. of menu items.                                                 
  214. HThe system detected an internal error.                         
  215. HMove the DEFHP tag to the profile or remove font attributes.   
  216. HThe specified end tag is not at the end of a list              
  217. or a lines section. The end tag will be ignored.               
  218. Recovery: Remove the end tag or insert the approbiate          
  219. start list tag.                                                
  220. HAdd the font name or remove the font style or size attribute.  
  221. HCorrect the sequence of TEXT and ETEXT tags and retry.         
  222. HCorrect the font name or load the font using the load font tag.
  223. HCorrect the tag and retry.                                     
  224. HCorrect the tag and retry.                                     
  225. HCorrect the tag and retry.                                     
  226. H!! no help text defined !!
  227. HCorrect the tag and retry.                                     
  228. HYou cannot define a child window as the parent of              
  229. another window. Change or remove the PARENT= attribute.        
  230. HAdd the missing number and retry.                              
  231. HCorrect the tag and retry.                                     
  232. HEnsure that the file is in the search path.                    
  233. HNo closing parenthesis found for the called function entry.    
  234. If you want to continue, an empty string is used as result of  
  235. function call.                                                 
  236. HYou have entered a function name which is not known to the     
  237. system. If you want to continue an empty string will be used   
  238. as a result of function.                                       
  239. HYou have not called the function ASC(character) with exactly   
  240. one argument. If you want to continue result "0" is assumed    
  241. the function.                                                  
  242. HUnused                                                         
  243. HYou cannot delete a system variable or a default value.        
  244. System variables can never by changed by the :SET or :DEL      
  245. command. Default values (variable name starting with $DEF)     
  246. can be changed using the :SET command.                         
  247. HDefault values cannot be changed using a generic key in the    
  248. :SET command. System variables can never be changed. If you    
  249. want to continue the command is ignored.                       
  250. HSystem variables can never be changed by the :SET command.     
  251. If you want to continue the command is ignored.                
  252. HYou have entered an unknown default name in the :SET command.  
  253. If you want to continue the command is ignored.                
  254. HYou have entered a generic name in the :SET command, but there 
  255. is no variable name starting with the given characters.  If you
  256. want to continue the command is ignored.                       
  257. H!! no help text defined !!
  258. HA variable name must start with a letter and consists only of  
  259. letters, digits, and underscores                               
  260. HThe program has detected a variable name during replace, which 
  261. is not known to the program.  The value vor the variable is    
  262. assumed to be an empty string, if you want to continue.        
  263.                                                                
  264. HThe length of the output string would be exeeded when the rest 
  265. of the input string is added. The rest of the string is        
  266. ignored.                                                       
  267. HYou cannot delete all user variables using the :DEL command.   
  268. Use terminate and init to delete all variables and reallocate  
  269. the user variable area. You may delete a group of variables    
  270. using ":DEL xxx*".                                             
  271. HSet is called without any variable or value. The input         
  272. may contain a superfluous period.                              
  273. HSet is called with more than two arguments.                    
  274. HYou have called the function ASC(character) with an argument   
  275. which is longer than one character. "0" will be used as result 
  276. of function call.                                              
  277. HYou have called the function CHAR(number) with an argument     
  278. which is not numeric or not a value from 1 to 255.  An empty   
  279. string will be used as resul for function call.                
  280. HYou have called the function NUM(expression,prec) with an      
  281. incorrect argument for precision. 0 will be used for precision 
  282. HYou have called the function POS(string,character) with a      
  283. second argument which is longer than one character. "0" will   
  284. be used as result of function call                             
  285. HYou have called the function ROT(string,number) with a second  
  286. argument which is not numeric. The original string will be     
  287. used as result of function call                                
  288. HYou have called the function STR(string,position[,length])     
  289. with a third argument which is not unsigned numeric. The       
  290. substring from position to the be used as result of function   
  291. call.                                                          
  292. Hyou have called the function STR(string,position[,length])     
  293. with a second argument which is not unsigned numeric. The      
  294. position is assumed to be 1 when building the result of        
  295. function call.:                                                
  296. HThe variable you want to delete is not available. The name you 
  297. have entered is perhaps not correct.                           
  298. H!! no help text defined !!
  299. H!! no help text defined !!
  300. HCorrect the tag and retry                                      
  301. HCorrect the tag and retry                                      
  302. HUnused                                                         
  303. HCorrect the tag and retry                                      
  304. HCorrect the tag and retry                                      
  305. HCorrect the tag and retry                                      
  306. HCorrect the tag and retry                                      
  307. HCorrect the tag and retry                                      
  308. HThere is no DLL with the given name, the DLL is not in the     
  309. LIBPATH or the DLL is locked. Check the DLL name and the       
  310. location of the DLL.                                           
  311. HThere is no bitmap with the given number in the DLL. Check     
  312. the number and the DLL name.                                   
  313. HIf you continue, default position will be used                 
  314. H!! no help text defined !!
  315. H!! no help text defined !!
  316. H!! no help text defined !!
  317. H!! no help text defined !!
  318. H!! no help text defined !!
  319. H!! no help text defined !!
  320. H!! no help text defined !!
  321. H!! no help text defined !!
  322. H!! no help text defined !!
  323. H!! no help text defined !!
  324. H!! no help text defined !!
  325. H!! no help text defined !!
  326. H!! no help text defined !!
  327. HRemove either the refid attribute or the text or id attribute. 
  328. HUse one of the numbers 1 or 2 for the heading number           
  329. HAdd the inserted end of block tag or change the start block tag
  330. HUnused                                                         
  331. HCheck the syntax of the REFID,                                 
  332. this REFID attribute will be ignored                           
  333. HInternal software error, inform your IBM representative        
  334. HInternal software error, inform your IBM representative        
  335. HInternal software error, inform your IBM representative        
  336. HCheck the syntax of the REFID,                                 
  337. this REFID attribute will be ignored                           
  338. HCheck the existence of the field specified                     
  339. HCheck for multiple definitions of the field required           
  340. HSpecify shorter valid string                                   
  341. If you continue, the string will be ignored                    
  342. HSpecify syntactically correct attribute                        
  343. If you continue, the attribute will be ignored                 
  344. HSpecify syntactically correct attribute                        
  345. If you continue, the attribute will be ignored                 
  346. HSpecify syntactically correct ID                               
  347. If you continue, the attribute will be ignored                 
  348. HYou specified more than one attribute defining an event        
  349. in an ON tag. Please check your statement and correct it.      
  350. HYou specified more than the allowed number of ON tags.         
  351. Please check your statements and simplify them.                
  352. HUnused                                                         
  353. HThe specified condition does conflict with the allowed syntax  
  354. Correct the condition and try again.                           
  355. HThe start and end condition of a FOR loop have to be numeric.  
  356. Correct the condition and try again.                           
  357. HThe specified file could not be executed since it is either    
  358. not found or not correctly specified.                          
  359. Correct the passed parameters and try again.                   
  360. HThe specified parameterlist is syntactically incorrect.        
  361. Correct the passed parameters and try again.                   
  362. HThe nesting of ON structures is not allowed.                   
  363. Correct your flow and try again.                               
  364. HThe specified style attribute for the default variable is not  
  365. a valid one. Change the error and try again.                   
  366. HUnused                                                         
  367. HThe referenced command line argument exceedes the maximum      
  368. length of a command line argument processed by the packager /  
  369. compiler.                                                      
  370. HThe referenced command line argument is invalid and was        
  371. skipped.                                                       
  372. HCorrect the command line and retry.                            
  373. HCorrect the command line and retry.                            
  374. HYou can specify only the package name and the startup file name
  375. any additional input is ignored.                               
  376. HSpecify the package name where you started the tutorial.       
  377. HCancel if you want to keep the package, else continue.         
  378. HSelect Cancel if you want to correct the package name.         
  379. Select Continue if you want to create a package with the       
  380. specified name.                                                
  381. HSelect Yes to update the file in the package.  Select No       
  382. to leave the package file as it is.  Select Cancel to stop     
  383. the package processing.                                        
  384. HRemove one of the conflicting styles.                          
  385. HUnused                                                         
  386. HThe number of arguments in the definition of a column is       
  387. incorrect. Correct the definition and retry.                   
  388. HCheck and correct the definition of the given column.          
  389. HA slider or value set definition was found in a resource that  
  390. has no control data associated. The control cannot be imported.
  391. HTo use the SUMMBUTTON or MENUBUTTON tag in the profile,        
  392. you must include a SUMMARY or MENU tag in the startup file.\n  
  393. The tag will be ignored. Either correct your startup file or   
  394. your profile and restart the tutorial.                         
  395. HReduce the number of index entries and start the tutorial      
  396. again.                                                         
  397. HThe version of the named DLL file is not compatible with the   
  398. Tutorial Manager/2 version you are using.                      
  399. Check the DLLs in your LIBPATH                                 
  400. directories and, make sure that the correct DLL is located in  
  401. one (and only one) of the directories.                         
  402. HCheck the tutorial part currently processed for endless loops  
  403. HThe referenced file is not known to Tutorial Manager/2         
  404. Probably the file is not listed in the startup file or it does 
  405. not exist. Check the name of the file and its existence.       
  406. HYou used a tag which is not yet implemented in the Tutorial    
  407. Manager/2 version you are using.                               
  408. Check if you have the latest version of Tutorial Manager/2 or  
  409. contact Tutorial Manager/2 development.                        
  410. HThe first tutorial file might be damaged or locked by another  
  411. process.                                                       
  412. HThe style NOCURSORSELECT may only be used for autoradio        
  413. buttons, STYLE=AUTORADIO.                                      
  414. Correct the tag and retry.                                     
  415. HThe referenced style value does not belong to the styles which 
  416. can be specified for this tag or another style value was       
  417. specified which can not be used together with the referenced   
  418. style value.                                                   
  419. HOnly button styles CHECKBOX, AUTOCHECKBOX, RADIO, AUTORADIO,   
  420. THREESTATE, and AUTOTHREESTATE may be used as arguments for    
  421. the BUTTONCHECKED call. Correct the tag and retry.             
  422. HAttribute which is mandatory was not specified.                
  423. Correct your tag and try again                                 
  424. HID used in DELIT tag may not be deleted. Tag will be ignored.  
  425. HThe specified ID is not unique.                                
  426. A window definition and a window instance exist with           
  427. the same ID, because you used the WINDOW tag without           
  428. specifying the ID= attribute.                                  
  429. If you press enter, the window instance will be deleted        
  430. and the window definition remains available.                   
  431. HThe file specified with the /PA option does not exist.         
  432. Make sure that the file is specified in your startup file      
  433. and that the file exists.                                      
  434. HCorrect the syntax of the /PA option and retry.                
  435. HYou have called the function LEN(string) with an invalid       
  436. option. The only valid option is 'C' and is only evaluated on  
  437. a DBCS system. Either remove or correct the option.            
  438. HYou have insufficient memory to proceed.\n                     
  439. Action:\n                                                      
  440. Try each of the following in order:\n                          
  441. 1. Close other active applications\n                           
  442. 2. Close and reopen Tutorial Manager/2.\n                      
  443. 3. Change the drive named in the SWAPFILE statement            
  444.    in your CONFIG.SYS file, then shut down the system and      
  445.    start it again.                                             
  446. HThe HELPID attribute may only be used for pulldown and         
  447. actionbar items. The attribute will be ignored.\n\n            
  448. Action: remove the HELPID attribute for the ITEM tag.          
  449. HYou defined a message box without the HELP style and specified 
  450. a HELPID. Since no help action is possible for this type of    
  451. message box, the HELPID attribute is ignored.\n\n              
  452. Action: remove the HELPID attribute for the MSGBOX tag or      
  453. use the HELP style for the MSGBOX tag.                         
  454. HThe tutorial you selected from the HELP pulldown could not     
  455. be started. Maybe you are running out of memory.\n\n           
  456. Action: close other programs and try again. If the problem     
  457. persists, please contact Tutorial Manager/2 development.       
  458. HText formatting is not supported for the codepage currently    
  459. active on your system. You may continue the tutorial but       
  460. text formatting will not work properly.\n\n                    
  461. Action: If you want text formatting to work properly,          
  462. switch to one of the codepages given in the error message      
  463. and restart the tutorial.                                      
  464. HThe DLL needed for text formatting on a DBCS system could      
  465. not be found. Text formatting may give strange results.\n\n    
  466. Action: Check that the DLL is in a directory specified on      
  467. the LIBPATH statement in your CONFIG.SYS file.                 
  468. HThe DLL needed for text formatting on a DBCS system is         
  469. damaged. Text formatting may give strange results.\n\n         
  470. Action: Check that the correct DLL is in a directory specified 
  471. on the LIBPATH statement in your CONFIG.SYS file.              
  472. HThe first tutorial file must contain at least one :PA or       
  473. :BRANCH tag.\n\n                                               
  474. Action: Correct the tutorial file and restart the tutorial.    
  475. HYou specified a new default value for the multiple/single      
  476. substitution symbol. This value may contain only one single    
  477. character.\n\n                                                 
  478. Action: Correct the :SET tag and restart the tutorial.         
  479. HCheck whether file specified does contain valid graphical      
  480. information.                                                   
  481. HSpecify the number of an existing dialog resource.             
  482. HIf you continue, the dialog will be created without the        
  483. specified control. Please refer to the documentation for       
  484. all supported controls.                                        
  485. HYou already specified the given tag. This tag is allowed       
  486. only once. Remove the incorrect tag and restart the tutorial.  
  487. HCorrect the referenced ID and/or tag.                          
  488. HEither the ICON= attribute is missing or the graphic           
  489. specified with the ICON= attribute could not be loaded.\n      
  490. Add/correct the ICON= attribute and retry.                     
  491. HEither change the button style to STYLE=USER or remove the     
  492. ICON= or DEPICON= attribute.                                   
  493. HContact your IBM representative for the correct version        
  494. of Tutorial Manager/2.                                         
  495. HThe number of data elements given with the DATA= attribute is  
  496. greater than the number given with the ELEMENTS= attribute.\n  
  497. The data entries will be ignored.\n                            
  498. Either increase the number of elements or remove some of the   
  499. data entries.                                                  
  500. HChange the POS= attribute or the TO= attribute.                
  501. HThe value has to be in the range specified for the             
  502. spinbutton.\n                                                  
  503. Either change the range on the RANGE= attribute or change      
  504. the VALUE= attribute.                                          
  505. HThe value has to be in the choicelist specified for the        
  506. spinbutton.\n                                                  
  507. Either change the choicelist on the CHOICE= attribute          
  508. or change the VALUE= attribute.                                
  509. HYou may not specify Tutorial Manager/2 tag names with the      
  510. :IGNORETAG tag.\n                                              
  511. Remove the tag name and retry.                                 
  512. HIf RC was:\n                                                   
  513. -3   the external REXX file was not found.\n                   
  514. 48   the REXX statements could not be executed.                
  515. HSpecify a non-zero value for the number of elements.           
  516. HCurrently only fields and buttons are supported for the copy   
  517. operation. The window element will be ignored.                 
  518. HSpecify a correct REXX procedure.                              
  519. HAttributes COLOR=, BACKCOLOR= and FONT= are not valid for      
  520. buttons with the USER style.\n                                 
  521. Either remove the USER style for the button or the invalid     
  522. attribute and restart the tutorial.                            
  523. HCurrently only fields and buttons are supported for the print  
  524. operation. The window element will be ignored.                 
  525. HYou tried to set the focus to an inactive window or to a       
  526. control in an inactive window. Tag will be ignored.            
  527. HValid combinations of Notebook styles are:\n\n                 
  528. MAJORTABRIGHT  with BACKPPAGEBOTRIGHT or BACKPAGETOPRIGHT,\n   
  529. MAJORTABLEFT   with BACKPPAGEBOTLEFT  or BACKPAGETOPLEFT,\n    
  530. MAJORTABTOP    with BACKPAGETOPRIGHT  or BACKPAGETOPLEFT and\n 
  531. MAJORTABBOT    with BACKPAGEBOTRIGHT  or BACKPAGEBOTLEFT.      
  532. HYou tried to define a page with the minor tab style but        
  533. no page with the major tab style was defined before.           
  534.                                                                
  535. HThe specified file name is too long. It will be                
  536. ignored.                                                       
  537. HThe specified file %1 does not exist. The system will start    
  538. from the beginning.                                            
  539. HThe specified file %1 already exists. Select OK to             
  540. overwrite it or CANCEL to cancel bookmark.                     
  541. HUnable to write to bookmark file %1.                           
  542. Disk full ?                                                    
  543. HUnable to read from bookmark file %1.                          
  544. HThe file %1 is not a valid bookmark file.                      
  545. HThe file %1 is not a valid file.                               
  546. HThe file %1 is not a takenized.                                
  547. HUnexpected end of file reached in file %1.                     
  548. HSpecifiy ONE of (BOOKMARK and /NOBOOKMARK.                     
  549. HYou used a DEFANIMATE tag inside a animation definition. The   
  550. tag will be ignored. You should check the position of the      
  551. tag or remove it and restart.                                  
  552. HYou tried to use a tag which is only allowed within a          
  553. animation definition. The tag will be ignored. Check the       
  554. position of the tag or remove it and restart.                  
  555. HRemove some animation ebtries from the current DEFANIMATE      
  556. section and restart the tutorial.                              
  557. HNo help available                                              
  558. HNo help available                                              
  559. HNo help available                                              
  560. HNo help available                                              
  561. HNo help available                                              
  562. HNo help available                                              
  563. HNo help available                                              
  564. HNo help available                                              
  565. HNo help available                                              
  566. HNo help available                                              
  567. HRemove the TRANSPARENT style and retry                         
  568. HRemove the SAVE style and retry                                
  569. HCorrect the error and try again                                
  570. HCheck if the working directory exists and correct the tag.     
  571. HValues for the ELEMENT= attribute have to be numeric and       
  572. greater 0.                                                     
  573. Please correct the values and restart the tutorial.            
  574. HThe CELLSIZE= value has to be greater or equal than 11.        
  575. Please correct the cellsize and restart the tutorial.          
  576. HThe item exceeds the number of elements specified in the       
  577. valueset. Please change the number of elements and restart     
  578. the tutorial.                                                  
  579. HThis function can only be used for valuesets that are defined  
  580. with the CREATECOLORS style.                                   
  581. HEither change the valueset-style or remove the items and       
  582. restart the tutorial.                                          
  583. HThe number of elements exceeds the maximum of 16.              
  584. The elements are changed to (4,4).                             
  585. HHelp not available.                                            
  586. HAn error occurred while proccessing MultiMedia Commands.       
  587. H                                                               
  588.                                                                
  589.