home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 36 Tips
/
36-Tips.zip
/
osmmcryc.txt
< prev
next >
Wrap
Text File
|
1997-03-09
|
3KB
|
94 lines
OSMMCRYC - 700AUD.EXE REQUIRED FOR IBM DESKTOP 750 WITH CRYSTAL SEMI
CHIP--OS/2 WARP
10/25/96
=======================================================================
700AUD.EXE Required for IBM Desktop 750 with Crystal Semi Chip--OS/2
Warp
=======================================================================
Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------
DESCRIPTION
OS/2 Warp does not come with any drivers that are 100% compatible
with the Crystal Semi Chip on the motherboard in IBM Desktop 750
computers. If you load any of the drivers that come with OS/2 Warp,
system sounds play, but there is no MIDI support. You also might
see the following error message:
SYS1201: The device driver "??????.???" specified in the ***
command on line *** of CONFIG.SYS file was not installed.
Line *** is ignored.
RESOLUTION
1. Download the 700AUD.EXE file from either:
* PC Company Web Site (http://www.pc.ibm.com/) in the
"File Area," or
* The IBM BBS (919-517-0001)
2. Install MMPM/2 support without loading any specific sound-card
driver.
Note: If you have already installed MMPM with a specific
driver, manually remove it and then reinstall it as
follows:
a. At the Configuration screen during installation or
Selective Install, make sure the Multimedia Device
Support section specifies None.
b. At the OS/2 Setup and Installation screen, make sure
there is a check mark in the Multimedia section.
OS/2 Warp should start without any MMPM error messages, and
the MMPM folder should be on the Desktop.
3. Open an OS/2 Window session.
4. Create a temporary directory and place the 700AUD.EXE file in
it.
Note: You could also place the file on diskette.
5. At a command prompt in the temporary directory, type
700AUD.EXE and press Enter to extract the bundled files.
6. Open the MMPM folder; then select Multimedia Application
Install.
7. Specify the temporary directory (where the extracted 700AUD
files are) as the source drive.
8. Highlight the three selections in the Features section:
* IBM PC 700 Series Crystal Semi Audio
* IBM PC 700 Series OPL3 MIDI
* Crystal Semi WIN-OS/2 Audio
These selections will provide sounds in both OS/2 and WIN-OS/2.
9. Follow the instructions on the installation screens. Be sure
to set up the sound chip on available hardware settings.
10. Shut down and then restart the system.
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including
without limitation, warranties of fitness and merchantability with
respect to the information in this document. By furnishing this
document, IBM grants no licenses to any related patents or copyrights.
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product
or brand names referenced in this document are the property of their
respective owners. Consult your product manuals for complete trademark
information.