home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 36 Tips
/
36-Tips.zip
/
osinnec4.txt
< prev
next >
Wrap
Text File
|
1997-05-14
|
2KB
|
50 lines
OSINNEC4 - NEC 4XI CD-ROM NOT WORKING WITH NCR53C810 CONTROLLER IN
OS/2 WARP
01/29/96
=======================================================================
NEC 4XI CD-ROM Not Working with NCR53C810 Controller in OS/2 Warp
=======================================================================
Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------
DESCRIPTION
The NEC 4XI CD-ROM is not working correctly on a system with an
NCR53C810 controller.
RESOLUTION
Note: Make sure you have a backup of any file you intend to change.
1. Contact your vendor and get the file, NCR-SCSI.ZIP.
2. Unpack the file, OS2CAM.ADD, and copy it to the OS2\BOOT directory.
3. At a command prompt, type E CONFIG.SYS and press Enter to edit the
CONFIG.SYS file.
4. Make sure the file contains the following statements:
BASEDEV=OS2DASD.DMD
BASEDEV=OS2SCSI.DMD
DEVICE=C:\OS2\BOOT\OS2CDROM.DMD /V
BASEDEV=OS2CAM.ADD
IFS=C:\OS2\BOOT\CDFS.IFS /Q
Use SCSI ID 3, 4, or 5 for the CD-ROM.
Note: Contact your vendor for assistance. OS/2 does not support the
OS2CAM.ADD driver.
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including
without limitation, warranties of fitness and merchantability with
respect to the information in this document. By furnishing this
document, IBM grants no licenses to any related patents or copyrights.
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product
or brand names referenced in this document are the property of their
respective owners. Consult your product manuals for complete trademark
information.