home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 28 Fixes4x
/
28-Fixes4x.zip
/
warp4iu.txt
< prev
next >
Wrap
Text File
|
1998-10-29
|
3KB
|
97 lines
IBM ThinkPad October 05, 1998
OS/2 Warp Version 4 Install Disk 1 Update and Install Disk 2 Update
Version 1.01
========================================================================
What These Diskettes Do
-----------------------
IBM ThinkPad OS/2 Warp Version 4 Install Disk 1 Update:
-------------------------------------------------------
The IBM ThinkPad OS/2 Warp Version 4 Install Disk 1 Update is a
replacement of IBM OS/2 Warp Version 4 Install Disk 1. This disk fixes
the following problems.
- OS/2 Warp Version 4 cannot be installed on harddisks that have over
4.3GB capacity.
- When ThinkPad 600, 600E, 770, 770E, 770ED, or 770X is docked to
SelectaDock III and an IDE device in SelectaDock III is assigned to
secondary IDE channel, the IDE device is not recognized.
- When ThinkPad 600, 600E, 770, 770E, 770ED, or 770X is docked to
SelectaDock I/II, the system with OS/2 Warp Version 4 installed
stops in the middle of its start up.
IBM ThinkPad OS/2 Warp Version 4 Install Disk 2 Update:
-------------------------------------------------------
The IBM ThinkPad OS/2 Warp Version 4 Install Disk 2 Update is a
replacement of IBM OS/2 Warp Version 4 Install Disk 2. This disk fixes
the following problems.
- OS/2 Warp V4 installation intermittently fails due to MOUSE$ error.
The following models are supported:
- ThinkPad 380XD, 385XD, 380Z
- ThinkPad 560X, 560Z
- ThinkPad 600, 600E
- ThinkPad 770, 770E, 770ED, 770X
To determine if you have to update the OS/2 Warp Version 4 Install Disk
1 & 2 Update or not, please refer to the "Summary of Changes" section.
Released Versions
-----------------
Version 1.00 Initial release
Version 1.01 A problem fix
Summary of Changes
------------------
Where: <n.nn> Diskette version (for example, 1.00 means Version 1.00)
(New) New function or enhancement
(Fix) Correction to existing function
<1.00>
-(New) COPYFROMFLOPPY=1 added in CONFIG.SYS.
IBM1S506.ADD updated.
DOSCALL1.DLL updated.
<1.01>
-(Fix) IBM1S506.ADD updated.
Installation Guide
------------------
(Note)
To determine if you have to update the OS/2 Warp Version 4 Install Disk
1 & 2 Update or not, please refer to the "Summary of Changes" section.
OS/2 Warp Version 4 comes with three diskettes for installation. These
update disks are replacements for "Disk 1" and "Disk 2".
1. Install OS/2 Warp Version 4 from the original Install Disk.
2. When you are prompted to insert Disk 1, use 'Install Disk1 Update'.
3. When you are prompted to insert Disk 2, use 'Install Disk2 Update'.
4. Continue installing OS/2 Warp Version 4.
<Installation Disk for Warp Version 3>
The information is available from the following web site.
http://service.software.ibm.com/os2ddpak/index.htm
When the home page appears, do the following. (The procedure is subject
to change without prior notice)
1. Click on "Yes, I agree. Show the Device Category List...".
2. Click on "OS/2 Component Updates".
3. Click on "Installation Diskette Update".
4. Click on "> 4.3GB IDE Hardfile Support".
5. Follow the instructions.
Trademarks
----------
* IBM, ThinkPad and OS/2 are registered trademarks of IBM Corporation.
Other company, product, and service names may be registered trademarks,
trademarks or service marks of others.