IBM ThinkPad October 05, 1998 OS/2 Warp Version 4 Install Disk 1 Update and Install Disk 2 Update Version 1.01 ======================================================================== What These Diskettes Do ----------------------- IBM ThinkPad OS/2 Warp Version 4 Install Disk 1 Update: ------------------------------------------------------- The IBM ThinkPad OS/2 Warp Version 4 Install Disk 1 Update is a replacement of IBM OS/2 Warp Version 4 Install Disk 1. This disk fixes the following problems. - OS/2 Warp Version 4 cannot be installed on harddisks that have over 4.3GB capacity. - When ThinkPad 600, 600E, 770, 770E, 770ED, or 770X is docked to SelectaDock III and an IDE device in SelectaDock III is assigned to secondary IDE channel, the IDE device is not recognized. - When ThinkPad 600, 600E, 770, 770E, 770ED, or 770X is docked to SelectaDock I/II, the system with OS/2 Warp Version 4 installed stops in the middle of its start up. IBM ThinkPad OS/2 Warp Version 4 Install Disk 2 Update: ------------------------------------------------------- The IBM ThinkPad OS/2 Warp Version 4 Install Disk 2 Update is a replacement of IBM OS/2 Warp Version 4 Install Disk 2. This disk fixes the following problems. - OS/2 Warp V4 installation intermittently fails due to MOUSE$ error. The following models are supported: - ThinkPad 380XD, 385XD, 380Z - ThinkPad 560X, 560Z - ThinkPad 600, 600E - ThinkPad 770, 770E, 770ED, 770X To determine if you have to update the OS/2 Warp Version 4 Install Disk 1 & 2 Update or not, please refer to the "Summary of Changes" section. Released Versions ----------------- Version 1.00 Initial release Version 1.01 A problem fix Summary of Changes ------------------ Where: Diskette version (for example, 1.00 means Version 1.00) (New) New function or enhancement (Fix) Correction to existing function <1.00> -(New) COPYFROMFLOPPY=1 added in CONFIG.SYS. IBM1S506.ADD updated. DOSCALL1.DLL updated. <1.01> -(Fix) IBM1S506.ADD updated. Installation Guide ------------------ (Note) To determine if you have to update the OS/2 Warp Version 4 Install Disk 1 & 2 Update or not, please refer to the "Summary of Changes" section. OS/2 Warp Version 4 comes with three diskettes for installation. These update disks are replacements for "Disk 1" and "Disk 2". 1. Install OS/2 Warp Version 4 from the original Install Disk. 2. When you are prompted to insert Disk 1, use 'Install Disk1 Update'. 3. When you are prompted to insert Disk 2, use 'Install Disk2 Update'. 4. Continue installing OS/2 Warp Version 4. The information is available from the following web site. http://service.software.ibm.com/os2ddpak/index.htm When the home page appears, do the following. (The procedure is subject to change without prior notice) 1. Click on "Yes, I agree. Show the Device Category List...". 2. Click on "OS/2 Component Updates". 3. Click on "Installation Diskette Update". 4. Click on "> 4.3GB IDE Hardfile Support". 5. Follow the instructions. Trademarks ---------- * IBM, ThinkPad and OS/2 are registered trademarks of IBM Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.