home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 8 Other
/
08-Other.zip
/
lssdetpr.zip
/
AII.MSG
(
.txt
)
next >
Wrap
OS/2 Message File
|
1995-04-19
|
11KB
|
253 lines
MKMSGF
=!W!
!6"c"'#
##${$
'q(t(w(z(}(
AII.msg
E%1 was started with unsupported parameters.
EThe following parameters were not valid: %1
E%1 was started with insufficient parameters.
EThe following parameters were missing: %1
E%1 was started with duplicate parameters.
EThe following parameters were duplicated: %1
EA file exists with the name %1.
EThe directory %1 could not be created.
EThe return code from %1 was %2.
Please insert the %1 diskette %2 in drive %3.
EAn error occurred while reading the file %1.
EAn error occurred while checking the disk space on drive %1.
EThe file %1 was not found.
%1 is ending, Ctrl+Break was detected.
Please insert the %1 installation diskette in drive %2.
EReturn code from %1 of %2 was %3.
ILAN Server 4.0 Productivity Aid
Idiskette
IInstallation diskette
ILAN Server Specialist Agent
Iresponse file
Iconfiguration file
IBM %1
Version %2
Copyright (C) IBM Corp. 1994.
All rights reserved.
ILAN Server Specialist
I%1 ended without errors.
EAn error occurred while updating %1.
E%1 ended with errors. The return code is 0x%2.
%1 was installed successfully.
EThe log file %1 cannot be opened.
EAn error occurred while validating %1.
EThe operating system must be OS/2 Version 2.0 or later.
%1 installs %2 on the target workstation.
Usage: %1 /T:<target path> [/S:<source path>]
[/L1:<remote log file name>]
[/INSTALL | /UNINSTALL]
[/NOAPPEND]
[/VERSION]
[/DISKSPACE]
[/QUIET]
E%1 cannot be started with the parameters
%2 and %3 on the command line at the same time.
EA valid drive indicator must follow %1.
EAn error occurred while locating %1.
EThere is not enough space on drive %1 to install %2.
INumber of bytes required = %1.
INumber of bytes available = %1.
EAn error occurred while running the following command:
ERefer to the log file %1 for more information.
ERefer to the log file %1 or %2 for more information.
IUnpacking %1 from %2 to %3.
ICopying %1 to %2.
EAn error occurred while copying the file %1 to %2.
IInstalling files to %1.
[%1] %2 has started.
[%1] %2 has ended.
*.ZIP will be excluded from all COPY commands:
Erasing files from %1.
WThe file %1 could not be erased.
WThe directory %1 could not be removed.
%1 was modified successfully.
%1 was uninstalled successfully.
IDeleting files. . .
EThe product contents file %1 was not found.
The %2 files will not be erased from the target path.
W%1 ended with warning messages logged.
EAn error occurred while adding the
%1 icon to the %2 folder.
EAn error occurred while deleting the
%1 icon from the %2 folder.
EThe %1 application is currently running.
%1 cannot be installed or uninstalled if the
%1 application is running.
EAn error occurred while determining if the
%1 application is running.
EA %1 program running in another session
is currently installing or uninstalling to the
same directory. The other %1 program must be
stopped before this one can continue processing.
EAn error occurred while determining if
another %1 program is running.
EAn error occurred while setting up to process
the %2.
The string length of the target path is greater than
%1 characters. The files will be unpacked relative to the
directory.
EAn error occurred while adding the
%1 folder to the LAN NetView folder.
EAn error occurred while deleting the
%1 folder from the LAN NetView folder.
EA later version of %1 is already
installed in %2.
Version of this program: %3
Version installed in %2: %4
%1 will not install over a later version of
%2 unless the %3 parameter has been supplied.
EA different version of %1 is installed in %2.
This version of %3 cannot be used to %6 a later
version of %1.
Version of this program: %4
Version installed in %2: %5
E%1 is not installed in the directory %2.
EThe format of the file %1 is invalid.
EA value was not specified for the %1 parameter.
W%1 has updated CONFIG.SYS. The original
has been saved as %2. Shut down and then
restart (Ctrl+Alt+Del) your workstation.
%1 installs %2 on the target workstation.
Usage: %1 /T:<target path> [/S:<source path>]
[/L1:<remote log file name>]
[/INSTALL | /UNINSTALL]
[/NOAPPEND]
[/VERSION]
[/QUIET]
%1 copies the %2 diskette images onto the code server.
Usage: %1 /S:<source drive> /T:<target path> [/DISKSPACE]
EThe value for %1 must be a valid diskette drive indicator.
EAn error occurred while copying diskette %1.
I%1 was copied successfully.
EThere is not enough space on drive %1 to
load the %2 diskette images.
IRegistering with the %1 component of %2 . . .
IRegistering the %1 daemon object with %2 . . .
IDeregistering from the %1 component of %2 . . .
IDeregistering the %1 daemon object from %2 . . .
IThe syslevel file for %1 (%2) or
%3 (%4) was not found in the active %5.
IThe syslevel file for %1 (%2) was not found in
the active %3.
IA syslevel file for %1 (%2, %3, or
%4) was not found in the active %5.
E%3 was unable to find the prerequisite product
%1. %3 must be able to find the %1
product before %2 can be installed.
WWarning! %3 was unable to find the prerequisite
product %1. The %1 product must be
installed before you can start %2.
WWarning! %3 was unable to find the %1
product. The %1 product must be installed
before %2 can log events.
E%4 was unable to find the %1 component of the
%2 product. The %1 component of the %2
product must be installed before you can install %3.
WWarning! %4 was unable to find the %1 component
of the %2 product. The %3 graphical
user interface cannot be used unless the %1 component
of the %2 product is installed.
E%1 was unable to find the %2 product's
environment variable, %3, in the current OS/2 environment.
Ensure that you have rebooted the system after installing
the %2 program. Also ensure that the statement
'SET %3=<path>' is in the CONFIG.SYS file on the boot drive.
E%4 was unable to find either of the prerequisite
products, %1 or %2. %4
must be able to find the %1 or %2
product before %3 can be installed.
WWarning! %4 was unable to find either of the
prerequisite products, %1 or %2.
The %1 or %2 product must be
installed before you can start %3.
EThere is not enough memory available for
%1 processing.
EAn error occurred while opening the main %1 %2.
EA syntax error was encountered in the %2 %3.
Line %1: %4
EAn error occurred while the reading %1 %2.
EAn error occurred while opening the included %1 %2.
EThe return code from the getnext routine is %1.
EThe return code from the listgetnext routine is %1.
EAn error occurred while processing the %1 %2.
EThe %1 parameter is required on the command line if
%2 is indicated.
EAn unrecognized keyword, %1,
was encountered in the %2 %3.
EThe value %1 is out of range for the keyword %2
in the %3 %4. The value for %2
must be between %5 and %6.
EThe value %1 is not valid for the keyword %2
in the %3 %4.
EThe value for %1 must be a valid numeric expression.
EThe possible values for %1 are %2 and %3.
EAn error occurred while creating the %1
configuration file %2.
EAn error occurred while setting up to process
the response file.
EThe value %1 exceeds the maximum of %2 characters
allowed for the %3 keyword in the %4 %5.
EThe value specified for the %1 keyword must be a valid
database name that would be accepted by the Database Manager product.
ENo memory is available.
IThe %1 event processor has been notified
of configuration updates.
W%1 was unable to remove the directory %2
because the directory %3 is the current directory
of one or more running programs or OS/2 sessions.
WThe environment variable %1 was not found.
WWarning! The %1 SYSLEVEL file %2 was
found in the directory %3. Unless actions are taken,
unexpected results may occur when running the %1 program.
Run 'HELP AII0138' for more information.
EThe %1 installation program is currently running.
The %2 program cannot be installed or uninstalled
from the command line if the %1 installation program
is running.
EAn error occurred while determining if the
%1 installation program is running.
EThe target path, %1, cannot be the same as
or a subdirectory of the source path, %2.
EThe target path, %1, cannot be the same as
the source path, %2.
WThe %1 file does not need to be copied at this time.
Install will continue . . .
W%1 was unable to erase one or more files in the
target path. These files will be removed once the workstation
is restarted. Shut down and then restart (Ctrl+Alt+Del) your
workstation.
I%1 is locked.
W%1 was unable to remove the directory %2.
The directory could contain files that were copied to or created
in it after the initial install of %3.
W%1 was unable to replace one or more files in the
target path. These files will be replaced once the workstation
is restarted.
EThe %1 component of %2 is currently
running. %1 must be stopped before the %3 program
can be installed or uninstalled.
EA semicolon is not allowed in the target path.
The target path is %1.
WAn error occurred while attempting to update the
%1 installation INI file. The %1 installation
panel may no longer reflect the true installation state of the
%2 program.
EThe %1 folder that was created by the %2
program no longer exists.
E%1 was unable to find the %2 program.
The syslevel file for %2 (%3) was not found
in the active %4.
IThe %1 folder icon has been modified successfully.
EAn error occurred while modifying the icon for
the %1 folder.
E%1 was unsuccessful.
WWarning! FFST/2 Version %1 is installed on the
workstation. %2 or later must be installed
before you can start %3.