home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 4 Drivers
/
04-Drivers.zip
/
usbaudio.exe
/
README.TXT
next >
Wrap
Text File
|
1999-01-25
|
3KB
|
75 lines
README.TXT File Version 1.0 for
Universal Serial Bus (USB) Digital Audio Device Driver Support for OS/2
January 25, 1999
(c) Copyright International Business Machines Corporation, 1998,1999.
All rights Reserved.
Contents
========
1.0 Overview
2.0 USB-Audio Driver Installation Instructions
3.0 USB-Audio Driver Un-Install Instructions
4.0 Requirements
1.0 Overview
=============
This USBAUDIO.EXE driver package provides you with IBM's most current support
for Universal Serial Bus (USB) digital audio devices on the OS/2 Operating
System.
1.1 The USBAUDIO.EXE file that you received contains the following 3 USB
files in a self-extracting compressed format.
- README.TXT This file that you are reading
- USBAINST.EXE Executable that installs USB audio driver support
- USBAUDIO.SYS USB Digital Audio Driver
2.0 USB-Audio Installation Instructions
===========================================
2.1 To use these USB driver files, you must expand the USBAUDIO.EXE file into
its 3 component files by
(a.) opening an OS/2 window and
(b.) typing USBAUDIO at the OS/2 command prompt.
Once the USBAUDIO.EXE file is expanded, please continue with the
USB Installation Instructions.
2.2 At the OS/2 command prompt, type USBAINST. This command will:
(a.) Verify that the Basic USB device driver support is present.
(b.) Create a backup copy of the existing CONFIG.SYS file. The name of
the backup file is displayed on the OS/2 window.
(c.) Add the USB digital audio device drivers to the OS2\BOOT directory on
the Boot partition.
(d.) Update the CONFIG.SYS file with the appropriate USB modem entry.
DEVICE=C:\OS2\BOOT\USBAUDIO.SYS
Where C: is the drive letter of the OS/2 boot partition on your
system.
2.3 This completes the installation procedure. You must now REBOOT you system
to initialize the USB digital audio device driver support.
3.0 USB-Audio Un-Install Instructions
================================
3.1 Restore the backup version of the CONFIG.SYS file that was created by the
IBMAINST utility to be the system's CONFIG.SYS configuration file.
3.2 Safely shut down and then re-boot your system in order to remove the
USB-Digital Audio driver from the system configuration.
4.0 Requirements
=================
4.1 Hardware
4.2 Software
(a.) USB Basic support
(end)