README.TXT File Version 1.0 for
Universal Serial Bus (USB) Digital Audio Device Driver Support for OS/2
January 25, 1999
(c) Copyright International Business Machines Corporation, 1998,1999.
    All rights Reserved.


Contents
========
1.0  Overview
2.0  USB-Audio Driver Installation Instructions
3.0  USB-Audio Driver Un-Install Instructions
4.0  Requirements


1.0  Overview
=============

This USBAUDIO.EXE driver package provides you with IBM's most current support
for Universal Serial Bus (USB) digital audio devices on the OS/2 Operating
System.

1.1  The USBAUDIO.EXE file that you received contains the following 3 USB
     files in a self-extracting compressed format.

        -  README.TXT    This file that you are reading
        -  USBAINST.EXE  Executable that installs USB audio driver support
        -  USBAUDIO.SYS  USB Digital Audio Driver


2.0  USB-Audio Installation Instructions
===========================================

2.1  To use these USB driver files, you must expand the USBAUDIO.EXE file into
     its 3 component files by
        (a.) opening an OS/2 window and
        (b.) typing USBAUDIO at the OS/2 command prompt.
     Once the USBAUDIO.EXE file is expanded, please continue with the
     USB Installation Instructions.

2.2 At the OS/2 command prompt, type USBAINST. This command will:
    (a.) Verify that the Basic USB device driver support is present.
    (b.) Create a backup copy of the existing CONFIG.SYS file. The name of
         the backup file is displayed on the OS/2 window.
    (c.) Add the USB digital audio device drivers to the OS2\BOOT directory on
         the Boot partition.
    (d.) Update the CONFIG.SYS file with the appropriate USB modem entry.
            DEVICE=C:\OS2\BOOT\USBAUDIO.SYS

            Where C: is the drive letter of the OS/2 boot partition on your
            system.

2.3 This completes the installation procedure. You must now REBOOT you system
    to initialize the USB digital audio device driver support.


3.0  USB-Audio Un-Install Instructions
================================

3.1  Restore the backup version of the CONFIG.SYS file that was created by the
     IBMAINST utility to be the system's CONFIG.SYS configuration file.

3.2  Safely shut down and then re-boot your system in order to remove the
     USB-Digital Audio driver from the system configuration.

4.0  Requirements
=================

4.1  Hardware

4.2  Software
     (a.) USB Basic support

(end)