home *** CD-ROM | disk | FTP | other *** search
/ OS/2 Shareware BBS: 4 Drivers / 04-Drivers.zip / se14os2.zip / BUSAUDIO.HLP (.txt) < prev    next >
OS/2 Help File  |  1995-01-16  |  4KB  |  107 lines

  1.  
  2. ΓòÉΓòÉΓòÉ 1. Help for Selecting Number of Adapters ΓòÉΓòÉΓòÉ
  3.  
  4. This field allows you to select the number of Business Audio adapters that you 
  5. have installed in your system. The maximum number of Business Audio Adapters is 
  6. one. 
  7.  
  8. Note:   If you select zero, audio support for the adapter will not be installed 
  9.         and if installed, it will be removed. 
  10.  
  11.  
  12. ΓòÉΓòÉΓòÉ 2. Help for Business Audio Adapter Install Values ΓòÉΓòÉΓòÉ
  13.  
  14. These fields allow you to select the parameters required to configure your 
  15. audio adapter.  Select OK to accept the default values and continue. 
  16.  
  17. Note:   If you change the default values, you must select OK.  If you close the 
  18.         window without selecting OK, the new values are not saved, and the 
  19.         system uses the default values. 
  20.  
  21. Note:   In some cases, incorrect I/O port, hardware interrupt and DMA 
  22.         selections can cause conflicts with other installed hardware.  If your 
  23.         system fails to initialize after install, re-install and select values 
  24.         which do not conflict. 
  25.  
  26. See also: 
  27.  
  28.   o  Device Type (ASIC) 
  29.   o  I/O Base Address 
  30.   o  Interrupt (IRQ) 
  31.   o  Playback DMA 
  32.   o  Capture DMA 
  33.  
  34.  
  35. ΓòÉΓòÉΓòÉ 3. Device Type (ASIC) ΓòÉΓòÉΓòÉ
  36.  
  37. Use this field to tell the system about your Business Audio Adapter. Although 
  38. all are based on similar hardware, there are differences in the hardware 
  39. implementations that require special programming by the device driver. 
  40.  
  41. Select the description that most reflects your installed hardware. 
  42.  
  43. See also: 
  44.  
  45.   o  I/O Base Address 
  46.   o  Interrupt (IRQ) 
  47.   o  Playback DMA 
  48.   o  Capture DMA 
  49.  
  50.  
  51. ΓòÉΓòÉΓòÉ 4. I/O Base Address ΓòÉΓòÉΓòÉ
  52.  
  53. This field allows you to select the I/O Port Base Address for your Business 
  54. Audio adapter. 
  55.  
  56. Use the drop down box to select an Address other than the default displayed. 
  57.  
  58. See also: 
  59.  
  60.   o  Device Type (ASIC) 
  61.   o  Interrupt (IRQ) 
  62.   o  Playback DMA 
  63.   o  Capture DMA 
  64.  
  65.  
  66. ΓòÉΓòÉΓòÉ 5. Interrupt (IRQ) ΓòÉΓòÉΓòÉ
  67.  
  68. This field allows you to select the hardware Interrupt for your Business Audio 
  69. adapter. 
  70.  
  71. Use the drop down box to select an Interrupt other than the default displayed. 
  72.  
  73. See also: 
  74.  
  75.   o  Device Type (ASIC) 
  76.   o  I/O Base Address 
  77.   o  Playback DMA 
  78.   o  Capture DMA 
  79.  
  80.  
  81. ΓòÉΓòÉΓòÉ 6. Playback DMA ΓòÉΓòÉΓòÉ
  82.  
  83. This field allows you to select the DMA channel for audio playback. 
  84.  
  85. Use the drop down box to select a channel other than the default displayed. 
  86.  
  87. See also: 
  88.  
  89.   o  Device Type (ASIC) 
  90.   o  I/O Base Address 
  91.   o  Interrupt (IRQ) 
  92.   o  Capture DMA 
  93.  
  94.  
  95. ΓòÉΓòÉΓòÉ 7. Capture DMA ΓòÉΓòÉΓòÉ
  96.  
  97. This field allows you to select the DMA channel for audio capture. 
  98.  
  99. Use the drop down box to select a channel other than the default displayed. 
  100.  
  101. See also: 
  102.  
  103.   o  Device Type (ASIC) 
  104.   o  I/O Base Address 
  105.   o  Interrupt (IRQ) 
  106.   o  Playback DMA 
  107.