═══ 1. Help for Selecting Number of Adapters ═══

This field allows you to select the number of Business Audio adapters that you 
have installed in your system. The maximum number of Business Audio Adapters is 
one. 

Note:   If you select zero, audio support for the adapter will not be installed 
        and if installed, it will be removed. 


═══ 2. Help for Business Audio Adapter Install Values ═══

These fields allow you to select the parameters required to configure your 
audio adapter.  Select OK to accept the default values and continue. 

Note:   If you change the default values, you must select OK.  If you close the 
        window without selecting OK, the new values are not saved, and the 
        system uses the default values. 

Note:   In some cases, incorrect I/O port, hardware interrupt and DMA 
        selections can cause conflicts with other installed hardware.  If your 
        system fails to initialize after install, re-install and select values 
        which do not conflict. 

See also: 

  o  Device Type (ASIC) 
  o  I/O Base Address 
  o  Interrupt (IRQ) 
  o  Playback DMA 
  o  Capture DMA 


═══ 3. Device Type (ASIC) ═══

Use this field to tell the system about your Business Audio Adapter. Although 
all are based on similar hardware, there are differences in the hardware 
implementations that require special programming by the device driver. 

Select the description that most reflects your installed hardware. 

See also: 

  o  I/O Base Address 
  o  Interrupt (IRQ) 
  o  Playback DMA 
  o  Capture DMA 


═══ 4. I/O Base Address ═══

This field allows you to select the I/O Port Base Address for your Business 
Audio adapter. 

Use the drop down box to select an Address other than the default displayed. 

See also: 

  o  Device Type (ASIC) 
  o  Interrupt (IRQ) 
  o  Playback DMA 
  o  Capture DMA 


═══ 5. Interrupt (IRQ) ═══

This field allows you to select the hardware Interrupt for your Business Audio 
adapter. 

Use the drop down box to select an Interrupt other than the default displayed. 

See also: 

  o  Device Type (ASIC) 
  o  I/O Base Address 
  o  Playback DMA 
  o  Capture DMA 


═══ 6. Playback DMA ═══

This field allows you to select the DMA channel for audio playback. 

Use the drop down box to select a channel other than the default displayed. 

See also: 

  o  Device Type (ASIC) 
  o  I/O Base Address 
  o  Interrupt (IRQ) 
  o  Capture DMA 


═══ 7. Capture DMA ═══

This field allows you to select the DMA channel for audio capture. 

Use the drop down box to select a channel other than the default displayed. 

See also: 

  o  Device Type (ASIC) 
  o  I/O Base Address 
  o  Interrupt (IRQ) 
  o  Playback DMA