home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 4 Drivers
/
04-Drivers.zip
/
mrai2e03.zip
/
MRAID.TXT
< prev
Wrap
Text File
|
2000-07-20
|
3KB
|
92 lines
Engineering Release date : Jul 20, 2000
Product Name : MegaRaid Driver For AMI
Component Name(s) and Version #:
-------------------------------
Components: For OS/2 Warp ver 3, 4 and e-Business
----------------------------------
Driver Version : v2e.03
MegaManager Version :v5.02
Reason for Release :
--------------------
1. The system seemed to hang when loading the OS from SCSI, which has been fixed.
2. Megamgr: Bug fixed in the path of logical drive viewing scrolling
3. Megamgr: De-Selection of Rebuildable drives on chnl 1 and above had trouble
- it was not allowing to be deselected.
Fixed on 7-7-00.
4. Megamgr: If a device id>9 is shown it was leaving '1' in the device field.
Corrected this on 6-26-00.
5. Megamgr: It was firing STARTUNIT(0x75) cmd with subop=0(valid values are
1 or 2 ). This was resulting in Rebuild-failure constantly.
Corrected in this on 6-29-00.
6.Megamgr: On 40ld card,the program was earlier firing PRODUCT_INFO cmd
to get logical Drive status before selection of logical Drives
for init/checkcon operation.
This was causing wrong decision in 'all drive selection' of
init/chkcon menu and drives were not being selected properly
specially on F2 key.
It is corrected by use of ENQUIRY3/FULL-SOLICITED cmd during
May 4-17,2000.
7. Megamgr: #Stripes=xx was being reported as 2-digits for 1..9 stripes
fitted logical drive in logical drive properties menu.
Fixed generically on Feb-08,2000.
Enhancements:
-------------
1. Megamgr: Automatic Configuration option is now made working.
2. Megamgr: Checks correct signatures for 438.
Known Restrictions/Bugs
-----------------------
Restrictions:
-------------
1. Six (6) adapters of any type is the maximum.
2. To use this driver on OS/2 e-business, set Emulation to mass storage
as there is a known bug in the firmware for I2O and OS/2 e-business
gives problem with I2O setting.
Known Bugs:
-----------
1. While running megamanager, after the displaying the format menu option,when we exit
a page fault error occurs, now it has to verified if the problem is due to driver or
due to the Megamanager.
NOTE:
-----
You can get latest 471/493/475 Firmware images from AMI web Site
http://www.ami.com or contact Tech Support at support@ami.com.
File Listing
------------
File Name Size Date Time
--------- ---- ---- ----
MRAID.ADD 24,274kb 05-08-00 2:55p
Megaconf.exe 221,926kb 07-14-00 9:01a
Readme.txt 2,911kb 07-20-00 4:14p